Model No. English Australia New Zealand TH-58AX800A TH-58AX800Z TH-65AX800A TH-65AX800Z Operating Instructions LED TV For more detailed instructions, refer to [eHELP] (Built-in Operating Instructions). ● How to use [eHELP] (p. 18) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only.
Contents Be Sure to Read Important Notice··················································· 3 Safety Precautions ··············································· 4 Quick Start Guide Accessories ························································ 7 Connections ························································ 9 Identifying Controls ··············································13 First time Auto Tuning···········································16 Using your VIERA Operations ····················
Important Notice Australia arising from course of dealing or course of performance of data communication between the USB devices and the USB port of Panasonic products. Transport only in upright position. Notice for Hybrid Broadcast Broadband TV ● This TV is designed to meet the standard of Hybrid Broadcast Broadband TV (“Hybrid Broadcast Broadband TV Standard”) as of January 2014. ● The specific services which comply with Hybrid Broadcast Broadband TV Standard may not be operated on this TVs.
Safety Precautions To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings and cautions below: ■ Mains plug and lead Warning If you detect anything unusual, immediately remove the mains plug. ● Do not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic dealer to perform the setup or installation of approved wall-hanging brackets. ● Do not apply strong force or impact to the display panel.
● Do not allow children to handle any small objects such as SD Card and R03 batteries. The small object could be swallowed by young children. Remove SD Card immediately after use and store out of reach of young children. ● 3D Eyewear contains small parts that can be swallowed by young children accidentally. Keep these parts out of reach of young children. ■ Pedestal Warning ● Do not disassemble or modify the pedestal. Caution ● Do not use any pedestal other than the one provided with this TV.
■ When not in use for a long time Caution This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live socket outlet. ● Remove the mains plug from the wall socket when the TV is not in use for a prolonged period of time. ■ Battery for the Remote Control / 3D Eyewear / Touch Pad Controller Caution ● Incorrect installation may cause battery leakage, corrosion and explosion. ● Replace only with the same or equivalent type.
Accessories Accessories may not be placed all together. Take care not to throw them away unintentionally. ● For the information of optional accessories, refer to [eHELP] (Support > Optional accessories). Remote Control (p. 13) ● N2QAYB000936 Assembling / Removing the pedestal Always use the Front Pedestal and the Rear Pedestal in combination. When using the pedestals, this TV is slightly inclined because of the slant design adopted.
■ Preventing the TV from falling over It is recommended to secure the pedestal to a furniture as shown to prevent the TV from falling over. ● This information is designed to reduce the risk of injuries caused by the TV falling over. However, no measure can guarantee protection in all cases. Band Screw E Wood screw 2 F 3 A ● Tighten the 4 assembly screws A loosely at first, then tighten them firmly to fix securely.
Connections Basic connections ■ Mains lead ● External equipment and cables shown are not supplied with this TV. ● Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables. ● Check the terminal type and cable plugs are correct when connecting. ● Use a fully wired HDMI compliant cable. ● Keep the TV away from electronic equipment (video equipment, etc.
● Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the responsibility of you, the customer.
■ Camcorder / Game equipment TV (VIDEO equipment) TV HDMI cable Amplifier with speaker system External equipment (DVD Player, etc.) (Viewing) (Listening) Game equipment Camcorder ■ Blu-ray Disc Player (3D-compatible equipment) HDMI cable Blu-ray Disc Player ■ PC TV ■ USB HDD (for recording) ● Use USB 3 for connecting the USB HDD. ● For more information, refer to [eHELP] (Recording). ■ VIERA Link ● Use HDMI1 - 4 for VIERA Link connection.
Cable tie To loosen: Keep pushing the knob Knob To remove from the TV: Snaps Keep pushing both side snaps Hooks Cover ■ Cable tie Attach the cable tie Insert the cable tie in a hole Hole Bundle the cables Set the tip in the hooks Hooks 12 English
Identifying Controls Remote Control ● Press after selecting channel positions to quickly change channel. ● Displays channel list. 7 [Option Menu] ● Easy optional setting for viewing, sound, etc. 8 Coloured buttons (red-green-yellow-blue) ● Used for the selection, navigation and operation of various functions. 9 Sound Mute On / Off 10 Teletext button ● This button is not used for this model. Australia ● Switches to teletext mode. New Zealand 11 Volume Up / Down 12 Numeric buttons ● Changes channel.
■ Installing / Removing batteries 1 Standby On / Off switch 2 Volume Up / Down Pull open 3 [Main Menu] 4 Touch pad (p. 14) 5 [Option Menu] Hook 6 My button ● Press to register the content as your favourite. Close Note the correct polarity (+ or -) ● For more information of my button, refer to [eHELP] (Functions > Touch Pad Controller > My button). 7 HOME ● Displays [Home Screen].
■ Installing / Removing batteries ● For the information of the camera operation, refer to [eHELP] (Functions > Built-in Camera). 2 Lens part Slide open 3 Angle adjuster ● Adjusts the angle of lens. 4 Remote control signal receiver ● Do not place any objects between the TV remote control signal receiver and remote control. 5 Ambient sensor ● Senses brightness to adjust picture quality when [Ambient Sensor] in the Picture Menu is set to [On].
First time Auto Tuning Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time. ● These steps are not necessary if the setup has been completed by your local dealer. ● Please complete connections (p. 9 - 12) and settings (if necessary) of the connected equipment before starting Auto Tuning. For details of settings for the connected equipment, read the manual of the equipment.
Operations or Turn power on ● To select a channel position with 2 or more-digit, e.g. 399 (TV) or To access each feature (Remote Control) ● Mains power On / Off switch should be on. (p. 15) Access [APPS List] and select a feature The last viewed [Home Screen] is displayed. Example: [TV Home Screen] Example: [APPS List] Example: Selected content screen ● APPS is the applications (features) of the TV.
How to Use eHELP Viewing 3D images [eHELP] is the detailed operating instructions built into the TV, and helps you to get more understanding of the operations for each feature. You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear (supplied). ● The 3D Eyewear must be worn to view 3D images.
To view the 3D images ■ Playing back 3D-compatible Blu-ray disc (Frame Sequential format) ● Connect the 3D-compatible player via a fully wired HDMI compliant cable. (If you use the non 3D-compatible player, the images will be displayed in 2D mode.) ● If the input mode is not switched automatically, select the input mode connected to the player using the AV button. ■ 3D-supported broadcast ● Please consult the suppliers of contents or programmes for availability of this service.
FAQs Before requesting service or assistance, please follow these simple guides to solve the problem. ● For more information, refer to [eHELP] (Support > FAQs). The TV does not switch on ● Check the mains lead is plugged into the TV and the socket outlet. The TV goes into Standby mode ● Auto power standby function is activated. The remote control does not work or is intermittent ● Are the batteries installed correctly? (p. 14) ● Has the TV been switched on? ● The batteries may be running low.
Maintenance Specifications First, remove the mains plug from the socket outlet. ■ TV Display panel, Cabinet, Pedestal Regular care: Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints. For stubborn dirt: (1) First clean the dust on the surface. (2) Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). (3) Wring the cloth firmly. (Please note liquids do not enter the TV inside.
Connection terminals AV IN (COMPONENT / VIDEO) VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 Ω) AUDIO L - R RCA PIN Type × 2 0.5 V[rms] Y 1.0 V[p-p] (including synchronisation) PB/CB, PR/CR ±0.35 V[p-p] PAL 60 Hz Playback of NTSC tape from some PAL Video recorders (VCR) M.NTSC Playback from M.
■ 3D Eyewear Dimensions (W × H × D) 164.7 mm × 41.0 mm × 170.7 mm Carry out the work on a level surface. Be sure to remove the Rear Pedestal before laying down the TV on the table. Foam mat or thick soft cloth Mass Approx. 34 Usage temperature range 0 °C - 40 °C Battery Coin-shaped lithium battery CR2025 Operation time Approx. 75 hours in continuous use of the battery made by Panasonic Materials The Front Pedestal is slightly tilted forward.
Use the assembly screws D supplied with the corner caps to attach the corner caps.
Australia Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. 2.
New Zealand WARRANTY - New Zealand only NEW ZEALAND Distributed in New Zealand by Panasonic New Zealand Limited 350 Te Irirangi Drive East Tamaki, Private Bag 14911, Panmure Auckland Tel. 09 272 0100 Customer Care Center Email: Customerservice@nz.panasonic.com www.panasonic.co.nz Warranty Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union.