user manual
38
Chapter 1 Basic Menu Features
Completion Notice
If Completion Notice is set, you will be notified on your computer when copying is completed.
z Before using this function, install the Panasonic Document Management System and PCL Printer Driver,
and then configure each software.
z To register the IP Address of your computer, refer to Network Scanner Settings (Option) and Completion
Notice in the Operating Instructions (For Setting Up) of provided booklet.
1
Place original(s).
z Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
3
Select the copy features if necessary.
4
Select “Completion Notice”.
5
Select an index tab or “Favorites” to
display the registered computers.
6
Select a designated computer, and
then select “OK”.
7
Enter the desired number of copies.
8
Select the Start key.
A completion notice will be sent to the
specified computer when copying is
completed.
z When copying from the Platen Glass, place
the next original, and follow the instructions
described on the touch panel display.
z After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.