Installation Guide

36
37
Alarm Outputs
The "Alarm Outputs" page allows you to assign a name and configuration to the alarm outputs on hybrid sys-
tems and certain IP cameras.
Enter a name for each alarm output in the "Alarm q
Name" column.
Configure the alarm output's "Normal State" as w
"Hi" (5VDC) or "Lo" (0VDC).
The "Status" column indicates whether the alarm e
output is in its normal (green) state or in its alarm
(red) state.
The output can be triggered to alarm state by an
event configured on the "Event Linking" page.
When you are finished configuring alarm outputs, r
click the [Apply] button.
r
q
w
e