Installation Guide Color CCTV Camera Model No: WV-CF314LE WV-CF304LE This illustration represents WV-CF314LE. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual.
We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directive 2004/108/EC. Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende norm of ander normatief dokument, overeenkomstig de bepalingen van Richtlijn 2004/108/EC.
Contents Important safety instructions............................................................................................................ 4 Limitation of liability.......................................................................................................................... 5 Disclaimer of warranty..................................................................................................................... 5 Preface..................................................................
Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Limitation of liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT. THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
Preface This product is a 1/3-type CCD color CCTV camera. Clear images can be captured although at the illuminance of 0 lx (black-and-white and IR LED on). Connection of this product to a video monitor allows users to use this product as a monitoring camera.
Motion detection function (VMD) equipped The motion of an object is detectable. The acts of covering the camera with a cloth, a cap or other acts and changing the camera direction during surveillance can be detected. Note: • The VMD function is not the dedicated function to prevent thefts, fires, etc. We are not responsible for any accidents or damages caused by applying the function for the above purposes.
Precautions Refer installation work to the dealer. resulting in injury. Installation work requires technique and experiences. Otherwise injury or damage to this product may result. Be sure to consult the dealer. Install this product in a location high enough to avoid people and objects from bumping the product. Do not insert any foreign objects. Failure to observe this may cause a drop resulting in injury or accidents. This could permanetly damage this product.
To keep on using with stable performance Cleaning this product body Parts of this product may deteriorate and it may shorten the lifetime of this product when using in locations subject to high temperatures and high humidity. (Recommended operating temperature: +35 °C or lower) Do not expose this product to direct heat sources such as a heater. Be sure to turn off the power before cleaning. Failure to observe this may cause injury. Do not use strong abrasive detergent when cleaning this product.
Precautions for installation Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. This product is designed to be used indoors. This product is not operable outdoors. Do not expose the product to direct sunlight for hours and do not install the product near a heater or an air conditioner. Otherwise, it may cause deformation, discoloration and malfunction.
Locally procure the screws Screws are not supplied with this product. Prepare the screws according to the material, structure, strength and other factors of the mounting area and the total weight of objects to be mounted. Screw tightening • The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the installation area. • Do not use an impact driver. Failure to observe this may cause overtightening and consequently damage to the screws.
Major operating controls and their functions 1 G 7 8 9 2 4 5 6 E 0 A B 1 G 2 8 9 4 5 6 E C C D D 3 3 H F I 1 Video output connector Transmits composite video signals. 2 Mark This mark is used when the dome cover is installed. 3 Lens 4 Panning table lock screw [LOCK] Locks the panning position after adjustment. 5 Panning table Adjusts the panning position of the camera. 6 Tilting lock screw Fixes the tilting position. 12 7 AF button [ABF] CF314L page 21.
• [SET]: Press this button in the menu to confirm the selected value or function. In addition, this button is used to open submenus. 9 Adjustment monitor output jack Connect the adjustment monitor (small LCD monitor, etc.) to the adjustment monitor output jack to adjust the camera angle. 0 Azimuth adjuster Adjusts the azimuth angle of the camera. A Zoom knob (with lock function) CF314L Locks the zoom position after zoom adjustment.
Preparations When installing the camera on a wall or ceiling, there are two methods as specified below. • Use the two-gang junction box • Installing the camera directly on a wall or ceiling Important: • Procure 4 screws (M4) to secure the camera to a wall or ceiling according to the material of the installation area. Do not use wood screws and nails. For mounting a camera on a concrete wall or ceiling, use an anchor bolt (M4) for securing. (Recommended tightening torque M4: 1.6 N·m {1.
About the side cable access hole If you choose not to drill hole in the wall or ceiling, but to wire the camera with the cable exposed, cut the cable access hole on the side of the dome cover to provide a cable entry. Side cable access hole Precautions when wiring from the side: • Remove the dust guard cap. Run the cable through the cable access hole and bend it inward, then reinstall the dust guard cap. • Run the cable through the side cable access hole as shown.
Installing the camera directly on a wall or ceiling Affix the installation template label (accessory) to the ceiling or wall, and use a pen to mark the positions of the screws and cable mounting hole in the ceiling or wall. Remove the installation template label, and attach the camera with 4 screws (M4, locally procured). .
Important: • The power supply of 24 V AC/12 V DC shall be insulated against 220 to 240 V AC. • The power supply is automatically switchover either 24 V AC or 12 V DC. No setting is required with this camera. Connection of power cord When connecting the power cord, use connectors that are designed for the power cord, and be careful not to let the power cord fall off. In addition, waterproofing work is needed at the joint, e.g., wrapping waterproof tape around the joint.
Installation Installation of camera Turn off the power of all related devices before installation. 1 Remove the dome cover. 2 Connect all cables. 3 Install the camera (The illustration below shows installation using a gang junction box). Mount the camera with 4 screws (M4, locally procured). Installation mark Screws (M4 locally procured) Important: • Be sure to avoid twisting the cables when tightening the screws.
Adjustment 1 Connect the ∅3.5 mm miniature plug (mono channel) to the adjustment monitor output jack. Important: • This video output is intended for confirmation of view angle, etc. during installation or repair service, and not for recording or monitoring. Note: • Adjustment monitor output jack is prior to video output cable. Video cannot be output through the video output cable after connecting the adjustment monitor.
3 Adjustment of azimuth Adjust the azimuth by rotating the azimuth adjuster. Rotation angle: Rotation angle: -100 ° +100 ° (This illustration represents WV-CF314LE.) Rotation angle: Rotation angle: -120 ° +120 ° (This illustration represents WV-CF304LE.) Note: • CF314L Adjust azimuth adjuster to make the image in the forward direction. • CF304L Adjust azimuth adjuster, refer to the following pictures, to display the image properly rather than upside-down.
Focus knob NEAR FAR WIDE TELE Zoom knob 1 Loosen the zoom knob and adjust to the best view angle between TELE and WIDE. Note: • The focus may not be adjusted smoothly when the zoom adjustment ring is extremely close to the end of W direction (T direction). At this time, slightly adjust the zoom adjustment ring towards the T direction (W direction), and then adjust the focus. 2 Tighten the zoom knob.
Attaching the dome cover 1 Align the mark with [|] on the dome cover, and then install the dome cover. 2 Turn the dome cover clockwise so that the mark aligns with [||]. Mark Mark [II] Mark [I] 3 Fix the dome cover and camera body with the dome cover fixing screw (M3). (Recommended torque: 0.59 N·m {0.44 lbf·ft}) 4 After finishing the installation, completely peel off the protection sheet that had been retained on the camera. 5 Press the [AF] button again to adjust the focus.
Setup menu Performing each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each item in accordance with the conditions of the camera shooting area. List of setup menu Setup item Description CAMERA ID This item specifies the camera title. The camera title that indicates the camera location and other information about the camera is created with alphanumeric characters and symbol, and then displayed on the screen.
Basic operation The operations in the setup menu are performed with the operation buttons after calling up the setup menu on the connected video monitor. The description below explains how to operate the setup menu basically. Screenshots of WV-CF314LE are shown as an example. Screenshot 1 Hold down the [SET] button for about 2 seconds to call up the top screen of the setup menu.
Screenshot 3 Step 4 The selected setup screen in the setup menu appears on the screen. **CAMERA SCENE1 ALC/ELC SHUTTER AGC SENS UP WHITE BAL DNR D&N(IR) VMD SETUP** ALC OFF ON(LOW) OFF ATW1 HIGH AUTO2 OFF RET TOP END Perform the settings for each item. • Selection of setting item: Press the [UP] or [DOWN] button to move the cursor. • Change of settings: Press the [RIGHT ] or [LEFT ] button.
Screen transition diagram Top screen MODEL WV-CF314L CAMERA ID OFF CAMERA SYSTEM BACK-FOCUS SPECIAL LANGUAGE END SETUP DISABLE CF314L "CAMERA ID" screen **CAMERA ID** 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;!?= +-*/%$ SPACE POSI RET TOP END RESET ................
Screen transition diagram Top screen MODEL WV-CF304L CAMERA ID OFF CAMERA SYSTEM SPECIAL LANGUAGE END SETUP DISABLE CF304L "CAMERA ID" screen **CAMERA ID** 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;!?= +-*/%$ SPACE POSI RET TOP END RESET ................
Troubleshooting Before asking for repairs, confirm the causes with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Symptom Cause/solution • Are the power cord and coaxial cable connected appropriately? → Check whether the connection is appropriately established. No image displayed Blurred image • Is the adjustment monitor connected? → Confirm whether the monitor is connected.
Specifications WV-CF314LE WV-CF304LE 24 V AC 50/60 Hz, 12 V DC 24 V AC: 3.6 W, 12 V DC: 410 mA IR LED on 1/3-type interline transfer CCD 976 (H)×582 (V) 4.8 mm (H)×3.6 mm (V) 2:1 interlace 625 lines 15.625 kHz 50.00 Hz Internal (INT) (Multiplexed vertical drive (VD2) cannot be set) 650 TV lines 400 TV lines 1.0 V [p-p] PAL composite video signal 75 52 dB (AGC OFF) 0.08 lx (color mode) 0.15 lx (color mode) Minimum illumination 0.008 lx (black-and-white mode•IR LED off) 0.
Day&Night (IR) WV-CF314LE AUTO1/AUTO2/ON/OFF WV-CF304LE IR LED lights irradiation distance 20 m IR LED lights Video motion detection Number of scene file Privacy zone Image stabilizer Electronic zoom Upside-down Lens distortion correction Back-focus setup OFF/AUTO/FIX OFF/MOTION DETECTION/SCENE CHANGE 2 ON (1)/ON (2)/OFF ON/OFF ON (up to 2x)/OFF ON/OFF 0 to 255 ABF/MANUAL --- 10 m Values of mass and dimensions are approximate. The specification is subject to change without notice.
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis.
Panasonic Corporation http://panasonic.net Importer's name and address to follow EU rules: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany © Panasonic System Networks Co., Ltd.