Installation Guide

20
3 Adjustment of azimuth
Adjust the azimuth by rotating the azimuth adjuster.
Note:
•
CF314L
Adjust azimuth adjuster to make the image in the forward direction.
•
CF304L
Adjust azimuth adjuster, refer to the following pictures, to display the image properly
rather than upside-down.
(This illustration represents WV-CF304LE.)
(This illustration represents WV-CF314LE.)
Rotation angle:
-100 °
Rotation angle:
+100 °
Rotation angle:
-120 °
Rotation angle:
+120 °
TO
P
On the wall ("ON" for "UPSIDE-DOWN")On the ceiling
Image top
mark
Image top
mark
4 Zoom and focus adjustment
CF314L
Perform the zoom and focus adjustments at the same time as pan and tilt adjustments (Step 3).
Note:
• When the camera is installed on a wall, perform zoom and focus adjustment first, then adjust-
ment of azimuth.
• If the camera is used in near-horizontal position, the shadow of the dome cover may appear in
the image.