Installation Guide

22
Attaching the dome cover
1 Align the mark with [|] on the dome cover,
and then install the dome cover.
3 Fix the dome cover and camera body
with the dome cover fixing screw (M3).
(Recommended torque: 0.59 N·m {0.44 lbf·ft})
4 After finishing the installation,
completely peel off the protection sheet
that had been retained on the camera.
5 Press the [AF] button again to adjust
the focus.
CF314L
For more information, refer to page 21.
Mark
Mark [I]
2 Turn the dome cover clockwise so that
the mark aligns with [||].
Mark [II]
Dome cover fixing
screw (M3)
AF button