Installation Guide

23
Problem Cause and Recommended Action Reference Pages
Poor picture color
• Is the dome cover or lens of the camera dirty? If so,
clean them.
7
• Use the special setup menu to adjust picture
quality.
Operating
Instructions
• Check the white balance setting.
Operating
Instructions
Image flicker
• If Super Dynamic 6 is turned on, turn it off.
Operating
Instructions
Afterimages in
the picture
• Check the DNR setting.
Operating
Instructions
Black-and-white picture
• The camera has an auto black-and-white switching
mode function. Check the setting of this mode.
Operating
Instructions
Frequent switching
between the color and
the black-and-white
modes
• Adjust the black-and-white mode switching level,
and the duration time setting.
Operating
Instructions
White specks in the
picture
• Use the PIX OFF function to perform blemish
compensation.
Operating
Instructions
Menu does not open.
• Is the camera connected correctly? See the
operating instructions that come with the system
controller you are using.
—
• Are camera communication settings configured
correctly?
12-15
20