User Guide

4
PREFACE
The WV-CU161 System Controller is designed for one-to-one use with the Combination Camera such as the WV-CS850 series
Combination Camera or the WV-RC100/WV-RC150 Receiver.
Camera control is performed by multiplexing the control signal with the video signal by connecting an AV Codec or the like, or
via RS-485 site communication*
1
.
Alarm signals, such as motion detector signals, can be supplied to external equipment from a built-in alarm output connector.
An alarm input connector allows moving the camera to the preset position when an alarm is activated.
The WV-CU161 is capable of downloading preset data from a camera such as the WV-CS850 series, save it in memory, and
upload it to the other combination cameras.
It can also control the camera patrol learning operations, including camera lenses, electronic zoom, auto focus, and pan/tilt
heads.
Consult your dealer about camera models suitable for uploading and downloading data. Please also refer to the Operating
Instructions of other peripherals.
FEATURES
The WV-CU161 offers the following functions:
Remote control*
3
of the camera*
2
and the WV-CU161 System Controller, including:
1 Pan/Tilt: Slow Pan/Slow Tilt/Auto Pan/Auto Sequence/Auto Sort/Random
2 Lens functions: Iris/Focus/Auto Focus/Zoom
3 Preset (Selection/Program)/Home/Camera Patrol (Learn/Play/Stop)
4 Colour/Black and White selection
5 Housing: Defroster/Wiper/Auxiliary 1, 2
6 External Devices (Power On/Off)
7 Alarm (Suspend/Reset)
8 Camera setup
Note: The WV-CU161 is not provided with functions to control the audio signal. Audio communication is not possible, regard-
less of whether audio boards are installed in the receiver.
*1 Communicate via RS-485 site communication is disabled in a daisy-chain connection.
*2 Controlling the same combination camera from multiple WV-CU161 units installed in different locations is not possible.
*3 For remote control functions refer to the Operating Instructions of the combination camera.