Operating Instructions

13
Follow the procedure below.
“ALC CONT” screen Mask setting screen“CAMERA SETUP” screen
**ALC CONT**(1)
BACK LIGHT COMP
OFF
MASK SET
- +
LEVEL .I..... 0
RET TOP END
BLC
OFF
ABS
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(LOW)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
AUTO2
VMD OFF
RET TOP END
D&N(IR)
Step 1
Set “ALC/ELC” to “ALC”, and press the [SET] button.
→
The “ALC CONT” screen appears.
Note:
 •
CW324L
CW314L
CW304L
CF314L
CF304L
CW324L
CW314L
CW304L
CF314L
CF304L
CW324L
CW314L
CW304L
CF314L
CF304L
When “ALC/ELC” is set to “ELC” or “ALC+” and the [SET] button is pressed, the “ELC CONT” or “ALC+ CONT”
screen will appear.
 •
CW324L
CW314L
CW304L
CF314L
CF304L
CW324L
CW314L
CW304L
CF314L
CF304L
Only have “ELC” function.
Step 2
Move the cursor to “BLC” and select the “ON” or “OFF”.
ON: Activates the BLC function.
OFF (default): Deactivates the BLC function.
Step 3
Move the cursor to “ABS” and select from the following options.
ABS (Auto Black Stretch Technology)
The latest digital signal technology is applied to automatically detect the dark areas in the image, acquire the brightness data around
the dark areas, and perform real-time color adjustment by calculating the best correction curve for each area. This function can be
used to perform real-time adjustment and correction of back light and dark area, and reproduce natural, clear images.
ON: Uses ABS.
OFF (default): Does not use ABS.
Step 4
When “BLC” is set to “OFF”, bright areas of an image are masked to facilitate the visibility of dark areas.
Move the cursor to “MASK SET” and press the [SET] button.
→
The mask setting screen appears.
“ALC CONT” screen
**ALC CONT**(1)
BACK LIGHT COMP
OFF
ABS
MASK SET
- +
LEVEL .I..... 0
RET TOP END
BLC
OFF
Mask setting screen