Operating Instructions

12
Installation and connection
Important:
•
The following installing and connections should be made by qualified service personnel or
system installers in accordance with all local codes.
1
Secure the camera mount bracket (option) to an installation position, and mount the
camera on the camera mount bracket.
Important:
•
The camera mount bracket shall be mounted on the foundation part of the construction or
a part with adequate strength.
•
When installing on the ceiling, select "ON" for "UPSIDE-DOWN" setting on the setup menu
(refer to page 29).
<Installation sample on a ceiling>
•
The mounting conditions of the camera mount bracket are described as follows:
Installation
place
Applicable
mount bracket
Recommended
screw
Number of
screw
Minimum pull-out
strength (per 1 pc.)
On ceiling WV-7011 M6 4 pcs. 196 N
WV-7010 M8 3 pcs. 196 N
WV-7012 M6 3 pcs. 196 N
On wall WV-831 M8 4 pcs. 921 N
WV-7013 M6 3 pcs. 2.25 kN
For some applicable mount brackets, "A" is attached to the model number. The mounting
conditions are the same even for the A-attached models.
Camera mount
bracket (option)
Screws
(locally procured)
Screws
(locally procured)