Operating Instructions

17
Basic operation
The description below explains how to operate the setup menu basically.
The operations in the setup menu are performed with the operation buttons after calling up
the setup menu on the connected video monitor.
Hold down the [SET] button for around 2
seconds to call up the top screen of the
setup menu.
The selected setup screen in the setup
menu appears on the screen.
Move the cursor to the item to be set, and
press the [SET] button.
Perform the settings for each item.
•
Selection of setting item:
Press the [UP] or [DOWN] button to move
the cursor.
•
Change of settings:
Press the [RIGHT] or [LEFT] button.
•
Display of advanced setup screen:
Press the [SET] button when "
" is
attached to the target setting item.
•
Return to previous setup screen:
Move the cursor to "RET" and press the
[SET] button.
•
Return to top screen:
Move the cursor to "TOP" and press the
[SET] button.
When configure the setting except for quick
setup menu, hold down the [SET] button for
around 2 seconds to quit the setup menu.
Screenshot 1
CAMERA ID OFF
SCENE SELECT
PRESET POSITION
ADVANCED SETUP
MODEL WV-CZ392
LANGUAGE
Step 1
Screenshot 2 Step 2
Step 3
PRESET POSITION
HOME POSITION OFF
SELF RETURN OFF
AUTO MODE OFF
IMAGE HOLD OFF
ZOOM INVERSE OFF
FOCUS INVERSE OFF
RET TOP
PRESET
MAP