Operating Instructions

29

Preset position setting
1
Preset Menu Display
1. Displaying the preset menu directly
(1) Move the cursor to "PRESET" and
select the position number.
(2)
Press the [SET] button. The preset setting
menu appears on the monitor screen.
2. Displaying the preset menu from the
"PRESET POSITION" (MAP) menu.
(1)
Move the cursor to "MAP " and
press the [SET] button. The "PRESET
POSITION" (MAP) menu appears on the
monitor screen.
(2) Move the cursor to the position
number to be set and press the [SET]
button. The preset setting menu
appears on the monitor screen.
To display any position number
between 33 and 64, move the cursor
to "033-064" in the lower left of the
screen and press the [SET] button.
**PRESET POSITION**
HOME POSITION OFF
SELF RETURN OFF
AUTO MODE OFF
IMAGE HOLD OFF
ZOOM INVERSE OFF
FOCUS INVERSE OFF
RET TOP
PRESET
MAP
RET TOP
065-096 001-032
**PRESET POSITION**
ID:
**PRESET POSITION**
ID:
033-064 225-256
RET TOP
10. Press the [UP], [DOWN], [RIGHT] or
[LEFT] button to set up the mask size
of the privacy zone, and then press the
[SET] button.
This completes the setting procedure
and returns to the zone setting menu.
11.
When "ON (2)" is selected for "PRIVACY
ZONE", move the cursor to "ZONE
LEVEL", and press the [LEFT] and [RIGHT]
buttons to set the level of privacy zone.
12. Move the cursor to "SET", and then press
the [SET] button.
This completes the privacy zone setting
procedure and returns to the zone
number selection menu.
Selecting "DEL" deletes the zone settings.
Note:
•
After setting the privacy zone, dislocation
will occur in the mask zone when upside-
down inverse is used.
%
Upside-Down Setting
OFF:
The video image cannot be reversed
upside down.
ON:
The video image can be reversed
upside down.
Default setting: OFF