Operating Instructions

36
4-1 Enter a new three-digit password in the
same way as in steps 3-1 to 3-2.
4-2 The cursor moves to "OK" after all the
three digits have been entered. Press
the [SET] button to move the cursor to
the first digit on the second line.
4-3 Enter the same password as the one
you have entered on the first line. The
cursor moves to "OK".
4-4 Press the [SET] button. If the new
password is successfully entered, the
screen returns to setup menu. Retry
steps 4-1 to 4-4. If the first entry for the
password is different from the second
one.
3-1 Select a numeral for the first digit
with the cursor, and press the [SET]
button. Though the entered password
is not displayed, the up-arrow moves
one character to the right.
3-2 Repeat the above step for the 2nd
and 3rd digits.
Default setting: 123.
3-3 The cursor moves to "OK" after all
the three digits have been entered.
Unless you want to change the
password, press the [SET] button.
Note:
•
Be sure to enter the initial password "123"
at first time, otherwise the switch between
"ON" and "OFF" of password lock cannot
be performed.
If the correct password is entered, the
screen returns to setup menu. "ON"
and "OFF" settings are the same as
made on the setup menu. If a wrong
password is entered, the screen
returns to the verification menu. Repeat
steps 3-1 to 3-3 to verify the password.
3-4 To cancel an incomplete password,
move the cursor to "RESET", and
press the [SET] button. The screen
returns to the verification menu.
New Password
4.
To change the password in step 3-3
above, move the cursor from "OK" to
"NEW PASSWORD
" then press the [SET]
button. "NEW PASSWORD" menu appears.
Note:
•
The "NEW PASSWORD" menu is accessible
only after the verification has been
completed. The up-arrow mark appears
indicating the first digit on the first line.
** NEW PASSWORD? **
0 1 2 3 4 5 6 7 8 9
RET TOP
OK RESET