Operating Instructions

7
Precautions
The following points as well as the contents of
"Warning" and "Caution" shall be observed.
Refer installation work to the dealer.
Installation work requires technique and
experiences. Otherwise injury, or damage to
this product may result.
Be sure to consult the dealer.
Do not insert any foreign objects.
This could permanetly damage this product.
Turn the power off immediately and contact
qualified service personnel for service.
Do not attempt to disassemble or modify
this product.
Failure to observe this may cause fire or
electric shock.
Consult the dealer for the repair or inspections.
Stop operation immediately when
something is wrong with this product.
When smoke goes up from this product or
the smell of smoke comes from this product,
continued use will result in fire, injury, or
damage to the product.
Turn the power off immediately and contact
qualified service personnel for service.
Select an installation area that can
support the total weight.
Selecting an inappropriate installation
surface may cause the product to fall down
or topple over, resulting in injury.
Installation work shall be started after
sufficient reinforcement.
Periodic inspections shall be conducted.
Rust on the metal parts or screws may cause
the product to fall down resulting in injury or
accidents.
Consult the dealer for the inspections.
This product shall be installed in a
vibration-free place.
Failure to observe this may cause screws
and bolts to be loosened and consequently
to fall resulting in injury.
Install this product high enough to ensure
that people don't hit their heads.
Failure to observe this may cause a drop
resulting in injury or accidents.
Do not strike or give a strong shock to
this product.
Failure to observe this may cause injury or fire.
Turn the power off when do wiring of this
product.
Failure to observe this may cause electric
shock. A short circuit or wrong wiring may
cause fire.
Do not use this product in an atmosphere
of ammable gases.
Failure to observe this may cause injury by
explosion.
Avoid installing this product in locations
where it is subject to damage by salt or
corrosive gas.
Oth e rwis e t he m o unti ng fixt ure s will
deteriorate, causing the product to fall down
and leading to accidents.
Tighten screws and mounting xtures to
the specied torque.
Failure to observe this may cause a drop
resulting in injury or accidents.