Operating Instructions

8
[Precautions for use]
This product is designed to be used
indoors.
This product is not operable outdoors.
This product has no power switch.
When turning off the power, turn off a circuit
breaker.
To keep on using with stable performance
Parts of this product may deteriorate and it
may shorten the lifetime of this product when
using in locations subject to high temperatures
and high humidity. (Recommended operating
temperature: +35 °C {95 °F} or lower)
Do not expose this product to direct heat
sources such as a heater.
Handle this product with care.
Do not drop this product, nor apply shock or
vibration to this product.
Failure to observe this may cause trouble.
Discoloration on the CCD color lter
When continuously shooting a bright light
source such as a spotlight, the color filter
of the CCD may have deteriorated and
it may cause discoloration. Even when
changing the fixed shooting direction after
continuously shooting a spotlight for a
certain period, the discoloration may remain.
Do not aim this product at strong light
sources.
A light source such as a spot light causes a
blooming (light bleeding) or a smear (vertical
lines).
Cleaning this product body
Turn the power off when cleaning this
pro duct. Do not u se s trong a brasi ve
detergent when cleaning this product.
Otherwise, it may cause discoloration.
Synchronous mode setting
Image synchronous mode of this camera
indicates internal synchronization (INT) only.
Set the multiplex vertical driver (VD2) as OFF
when the camera is connected to the system
controller of the company.
Blooming
Smear Bright subject