User manual

ManualsBrandsPANASONIC ManualsIP CCTV Systemsi-Pro Extreme LAN IP CCTV camera 1920 x 1080 pix

New functions and addendum

・This document contains descriptions of how to set the new functions and their restrictions.

It is recommended to read them while referring to the Operating Instructions provided with this product

together.

・Depending on the model used, the screens shown in the explanations may differ to the actual camera

screens.

・The model number is abbreviated in some descriptions in this manual.

About notations

The following notations are used when describing the functions limited for specified models.

The functions without the notations are supported by all models.

：WV‑S1132, WV‑S1112

：WV‑S1131, WV‑S1111

：WV‑S1531LTN, WV‑S1531LN, WV‑S1511LN

：WV‑S2531LTN, WV‑S2531LN, WV‑S2511LN

：WV‑S2231L, WV‑S2211L

：WV‑S2131L, WV‑S2131, WV‑S2111L

：WV‑S2130, WV‑S2110

：WV‑S1132, WV‑S1131

：WV‑S1112, WV‑S1111

：WV‑S1531LTN, WV‑S1531LN

：WV‑S1511LN

：WV‑S2531LTN, WV‑S2531LN

：WV‑S2511LN

：WV‑S2231L

：WV‑S2211L

：WV‑S2131L, WV‑S2131, WV‑S2130

：WV‑S2111L, WV‑S2110

Due to software upgrade, the following functions have been added and changed to this

product.

・Firmware Ver.1.20

No.

Functions

Item (Page)

Page

Addition of “IEEE 802.1X” function.

User mng.

Addition of “SNMPv3” function.

Advanced(Network)

Addition of “1280x720” setting to Stream(3).

Image(Image/Audio)

・Firmware Ver.1.40

“Data encryption” added to “User mng.” menu

User mng.

[--FREE ENTRY--] added to [Max bit rate (per client)*]

Image(Image/Audio)

“

On(Advanced)” of [Smart Coding] now available

when not using “VBR”

Image(Image/Audio) 10

Support for 256 GB SDXC memory cards

SD memory card(Basic)

Summary of content (11 pages)

PAGE 1
New functions and addendum ・This document contains descriptions of how to set the new functions and their restrictions. It is recommended to read them while referring to the Operating Instructions provided with this product together. ・Depending on the model used, the screens shown in the explanations may differ to the actual camera screens. ・The model number is abbreviated in some descriptions in this manual.
PAGE 2
1. Addition of “IEEE 802.1X” function. [IEEE 802.1X] tab of the “User mng.” page has been added. This function can be used when building a secure network using authentication LAN switches. Refer to the network administrator for information on authentication LAN switches. Click [IEEE802.1X] tab on the “User mng.” page. [IEEE 802.1X] Select On/Off to determine whether or not to perform port authentication using IEEE 802.1X.
PAGE 3
2. Addition of “SNMPv3” function. (Operating Instructions Configuring the network settings [Network] - Configure advanced network settings [Advanced] - Configure the settings relating to SNMP) [SNMP version] Select the SNMP version to be used. • SNMPv1/v2: SNMPv1/v2 is activated. • SNMPv3: SNMPv3 is activated. • SNMPv1/v2/v3: SNMPv1/v2/v3 is activated. • Default: SNMPv1/v2 [SNMPv1/v2] - [Community] Enter the community name to be monitored.
PAGE 4
[SNMPv3] - [Encryption method] Select the SNMPv3 encryption method from DES/AES. • Default: DES [SNMPv3] - [Password (8 to 32 characters)] Set the SNMPv3 password. • Available number of characters: – If the authentication method is MD5: Empty field or 8-16 characters – If the authentication method is SHA1: Empty field or 8-20 characters • Unavailable characters: " & [System name] Enter a system name to be used to manage the camera with the SNMP function.
PAGE 5
3.
PAGE 6
Image capture mode Stream(1) Stream(2) Stream(3) Stream(4) 1.3 mega pixel [16:9] (30fps mode) 1280 x 720 640 x 360 320 x 180 1280 x 720 640 x 360 320 x 180 1280 x 720 640 x 360 320 x 180 640 x 360 320 x 180 1.3 mega pixel [16:9] (60fps mode) 1280 x 720 1280 x 960 800 x 600 VGA 400 x 300 QVGA 1280 x 720 640 x 360 320 x 180 VGA 400 x 300 QVGA 640 x 360 320 x 180 1.
PAGE 7
4. “Data encryption” added to “User mng.” menu [Data encryption] was added to the “User mng.” page. Click the [Data encryption] tab in the “User mng.” page. Click the “+” mark on the left of the setup menu to expand the respective item, and enable detailed settings. Click the “-” mark on the left of an expanded item to return to the screen displayed before the item was expanded. [Data encryption (Batch change)] Select “On” or “Off” to determine whether or not to activate data encryption.
PAGE 8
•Data encrypted JPEG cannot be viewed on the browser’s “Playback” page. Download it to a PC and use the decryption tool to confirm it. Refer to our website (http://security.panasonic.com/support/info/) for further information about the decryption tool. •If you set data encryption to “On”, audio on the [Audio detection] screen will become inaudible. Note •In order to view streams with data encryption set to “On”, you must install the viewer software.
PAGE 9
5. [--FREE ENTRY--] added to [Max bit rate (per client)*] (Operating Instructions Configure the settings relating to images and audio [Image/Audio] Configure the settings relating to Stream [Image]) When setting “Max bit rate (per client)*” of Stream(1) – (4), in addition to selecting an item from the pull-down menu, you can now set the item freely.
PAGE 10
6. “On(Advanced)” of [Smart Coding] now available when not using “VBR” (Operating Instructions Configure the settings relating to images and audio [Image/Audio] Configure the settings relating to Stream [Image]) Previously “Smart Coding” was only available for Stream(1) – (4) when the [Transmission priority] was “VBR”; now “Smart Coding” “GOP control” can be set to “On(Advanced)” even when “VBR” is not selected.
PAGE 11
7. Support for 256 GB SDXC memory cards (Operating Instructions Configure the basic settings of the camera [Basic] Configure the settings relating to the SD memory card [SD memory card]) The upper limit for supported SD memory cards is 256 GB. Compatible SD memory card (option) Manufactured by Panasonic (SD speed class 4 or higher) miniSD and microSD cards cannot be used.