User manual
If you move the slider in the “+” direction, the redness of skin color will increase, and the blueness of sky color
will decrease.
If you move the slider in the “-” direction, the redness of skin color will decrease, and the blueness of sky color
increase.
Click the [Reset] button to reset to the default setting.
• Default: 128
[Aperture level]
Adjust the aperture level (outline compensation).
If you move the slider in the “+” direction, the outline of the image will become sharper, and if you move it in
the “-” direction, the outline of the image will become softer. Click the [Reset] button to reset the color to the
default.
• Default: 16
[Pedestal level]
Adjust the black level of images by moving the slider.
When the slider is moved to the “+” direction, images will become brighter. When the slider is moved to the
“-” direction, images will be darker. Click the [Reset] button to reset the color to the default.
• Default: 128
[DNR]
The digital noise reduction function reduces noise automatically under the condition of low illuminance.
If you move the slider in the “+” direction, the noise reduction effect is strengthened. There may be many
afterimages.
If you move the slider in the “-” direction, the noise reduction effect is weakened. There are fewer afterimages.
Click the [Reset] button to reset to the default setting.
• Default: 128
Scene registration
[Scene file]
The combination of settings used to adjust image quality can be saved as a scene file. The scene file can be
selected here.
Registered scene files can be configured in the “Schedule” page (®page 201). If the timing of when images
are viewed greatly affects the area where images are viewed, registering scene files to the schedule can let
you match a combination of settings to different times of day in order to view images in the best conditions.
[Scene file title]
The scene file name (up to 10 characters) displayed in “Scene file” can be changed. Only file names displayed
in “1:”, “2:”, “3:”, and “4:” can be changed.
• Unavailable characters: " &
[Load] button
Loads the setting data selected in “Scene file” and changes the current image accordingly.
110 Operating Instructions
2 Settings