Operating Instructions

2.5.4.3 Adjust the zoom and focus
Click the [Setup>>] button of “Zoom/Focus adjustment” on the [Image quality] tab of the “Image/Audio” page.
(®Page 99)
Zoom/Focus adjustment
It is possible to adjust the angular field of view using the zoom and the extra optical zoom.
Adjust the focus setting by moving the lens focus to the appropriate position.
Manual and auto adjustments are available.
[Zoom ratio designation]
The zoom and focus can be adjusted at the same time.
Operate the slider to enlarge/reduce the angular field of view adjustment outline in the image.
When adjusting the zoom ratio to the “Tele” side, only the angular field of view adjustment outline is reduced,
and it is possible to determine the zoom ratio while checking the angular field of view after zooming is
performed.
When adjusting the zoom ratio to the “Wide” side, the image itself is zoomed out of or the angular field of view
adjustment outline is enlarged, and it is possible to determine the zoom ratio while checking the image size
after zooming is performed.
After the angular field of view adjustment outline is adjusted, zooming is performed, and the auto focus function
starts to automatically adjust focus based on a subject located in the center of the screen by clicking the
[Execute] button.
Operating Instructions 113
2 Settings