Operating Instructions

Table Of Contents

• If access often fails due to the change in the global address of router, set a smaller value for “Access

interval”.

Checking the information registered for the “Viewnetcam.com” service

It is possible to check if the camera has been registered for the “Viewnetcam.com” service. (®page 210)

2.9.6.2 When using “Dynamic DNS Update”

[Host name]

Enter the host name to be used for the Dynamic DNS Update service.

• Available number of characters: 3 - 250 characters

Enter in the form of “(host name). (domain name)”.

• Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the

hyphen (-).

• Default: None (blank)

Note

• Refer to the network administrator for further information about the available host names.

[Access interval]

Select the interval to access the Dynamic DNS Update service server to check the IP address and the host

name from the following.

10min/ 20min/ 30min/ 40min/ 50min/ 1h/ 6h/ 24h

• Default: 24h

Operating Instructions 199

2 Settings