Operating Instructions
Table Of Contents
- Table of Contents
- 1 Operations
- 2 Settings
- 2.1 About the network security
- 2.2 Display the setup menu from a PC
- 2.3 Use Easy Setup [Easy Setup]
- 2.3.1 Configure the Internet settings [Internet]
- 2.3.2 Configure an event action [Event action]
- 2.3.2.1 Configure the schedule/alarm (event function type setup menu)
- 2.3.2.2 Alarm: Configure the terminal and VMD (alarm setup menu)
- 2.3.2.3 Alarm: Configure the alarm function type (Alarm function type setup menu)
- 2.3.2.4 Alarm: Configure the details for image transfer or recording conditions
- 2.3.2.5 Alarm: Configure the output terminal
- 2.3.2.6 Alarm: configure the mail notifications and mail server
- 2.3.2.7 Schedule: Configure SD recording or FTP periodic image transmission (schedule function type setup menu)
- 2.3.2.8 Schedule: Set SD memory recording (video recording setup menu)
- 2.3.2.9 Schedule: Configure FTP periodic image transmission (FTP periodic image transmission setup menu)
- 2.4 Configure the basic settings of the camera [Basic]
- 2.4.1 Configure the basic settings [Basic]
- 2.4.2 Configure the settings relating to the SD memory card [SD memory card]
- 2.4.3 Configure the settings relating to alteration detection [Alteration detection]
- 2.4.4 How to configure alteration detection settings
- 2.4.5 Access copy images saved on the SD memory card onto the PC [SD memory card images]
- 2.4.6 Configure the directory of the PC that images will be downloaded to [Log]
- 2.5 Configure the settings relating to images and audio [Image/Audio]
- 2.5.1 Configure the settings relating to the image capture mode [Image]
- 2.5.2 Configure the settings relating to JPEG images [Image]
- 2.5.3 Configure the settings relating to Stream [Image]
- 2.5.4 Configure the settings relating to image adjust, zoom/focus, privacy zone, VIQS, and lens distortion compensation [Image quality]
- 2.5.4.1 Configure the settings relating to image quality (“Image adjust” setup menu)
- 2.5.4.2 Set mask areas
- 2.5.4.3 Adjust the zoom and focus
- 2.5.4.4 Configure the settings relating to the privacy zone (“Privacy zone” setup menu)
- 2.5.4.5 Configure the VIQS setting
- 2.5.4.6 Configure the VIQS area
- 2.5.4.7 Configure the settings relating to lens distortion compensation
- 2.5.5 Configure the settings relating to audio [Audio]
- 2.6 Configure the multi-screen settings [Multi-screen]
- 2.7 Configure the alarm settings [Alarm]
- 2.7.1 Configure the settings relating to the alarm action [Alarm]
- 2.7.2 Configure the settings relating to the output terminal [Alarm]
- 2.7.3 Change the AUX name [Alarm]
- 2.7.4 Configure the settings relating to the camera action on alarm occurrence [Alarm]
- 2.7.4.1 Configure settings relating to image quality on alarm action
- 2.7.4.2 Configure settings relating to alarm E-mail notifications
- 2.7.4.3 Configure settings relating to FTP transmissions of alarm images
- 2.7.4.4 Configure settings relating to recording to an SD memory card when an alarm occurs
- 2.7.4.5 Configure settings relating to Panasonic alarm protocol notification when an alarm occurs
- 2.7.4.6 Configure settings relating to HTTP alarm notification when an alarm occurs
- 2.7.5 Configure the VMD settings [VMD area]
- 2.7.6 Set the VMD areas [VMD area]
- 2.7.7 Configuration of the settings relating to alarm notification [Notification]
- 2.8 Configure the settings relating to the authentication [User mng.]
- 2.9 Configuring the network settings [Network]
- 2.9.1 Configure the network settings [Network]
- 2.9.2 Configure advanced network settings [Advanced]
- 2.9.2.1 Configure the settings related to sending E-mails
- 2.9.2.2 Configure the settings related to FTP transmission
- 2.9.2.3 Configure the settings relating to the NTP server
- 2.9.2.4 Configure the UPnP settings
- 2.9.2.5 Configure the HTTPS settings
- 2.9.2.6 Configure the settings relating to DDNS
- 2.9.2.7 Configure the settings relating to SNMP
- 2.9.2.8 Configure the QoS settings
- 2.9.3 How to configure HTTPS settings
- 2.9.4 Access the camera using the HTTPS protocol (for pre-installed certificate)
- 2.9.5 Access the camera using the HTTPS protocol (for CA Certification)
- 2.9.6 How to configure the settings relating to DDNS
- 2.10 Configure the settings relating to the schedules [Schedule]
- 2.11 Maintenance of the camera [Maintenance]
- 2.12 Display the Panasonic support website [Support]
- 3 Others
2.11 Maintenance of the camera [Maintenance]
System log check, firmware upgrade, status check and initialization of the setup menu can be performed on
this page.
The “Maintenance” page has the [System log] tab, the [Upgrade] tab, [Status] tab, the [Default reset] tab, and
the [Data] tab.
2.11.1 Check the system log [System log]
Click the [System log] tab of the “Maintenance” page. (®page 43, page 44)
Up to 4,000 system logs can be saved on the SD memory card when the SD memory card is inserted after
selecting “Use” for “SD memory card” on the [SD memory card] tab (®page 72).
When “Not use” is selected for “SD memory card”, up to 100 system logs can be saved on the built-in memory
of the camera.
When the saved system logs have reached the maximum number, the newer logs will overwrite the older
system logs. In this case, the oldest log is the first to be overwritten.
The system logs will be displayed in group of 100 logs each, and the logs will be saved even when the power
of the camera is turned off.
[<< Latest 100]
When clicking “<< Latest 100”, the latest 100 system logs will be displayed.
[Next 100 >>]
When clicking “Next 100 >>”, the next 100 system logs will be displayed.
[Number of pages display]
The currently opened page will be displayed in the “page/total page” format.
[<< Previous 100]
When clicking “<< Previous 100”, the previous 100 system logs will be displayed.
[No.]
The serial number of the system log will be displayed.
[Time & date]
Time and date at the error occurrence will be displayed.
Note
• When “Off” is selected for “Time display format” on the [Basic] tab (®page 65), time & date of logs will
be displayed in 24-hour format.
[Description]
The descriptions about the system log will be displayed. Refer to page 223 for further information about the
system logs.
208 Operating Instructions
2 Settings