Operating Instructions
Table Of Contents
- Table of Contents
- 1 Operations
- 2 Settings
- 2.1 About the network security
- 2.2 Display the setup menu from a PC
- 2.3 Use Easy Setup [Easy Setup]
- 2.3.1 Configure the Internet settings [Internet]
- 2.3.2 Configure an event action [Event action]
- 2.3.2.1 Configure the schedule/alarm (event function type setup menu)
- 2.3.2.2 Alarm: Configure the terminal and VMD (alarm setup menu)
- 2.3.2.3 Alarm: Configure the alarm function type (Alarm function type setup menu)
- 2.3.2.4 Alarm: Configure the details for image transfer or recording conditions
- 2.3.2.5 Alarm: Configure the output terminal
- 2.3.2.6 Alarm: configure the mail notifications and mail server
- 2.3.2.7 Schedule: Configure SD recording or FTP periodic image transmission (schedule function type setup menu)
- 2.3.2.8 Schedule: Set SD memory recording (video recording setup menu)
- 2.3.2.9 Schedule: Configure FTP periodic image transmission (FTP periodic image transmission setup menu)
- 2.4 Configure the basic settings of the camera [Basic]
- 2.4.1 Configure the basic settings [Basic]
- 2.4.2 Configure the settings relating to the SD memory card [SD memory card]
- 2.4.3 Configure the settings relating to alteration detection [Alteration detection]
- 2.4.4 How to configure alteration detection settings
- 2.4.5 Access copy images saved on the SD memory card onto the PC [SD memory card images]
- 2.4.6 Configure the directory of the PC that images will be downloaded to [Log]
- 2.5 Configure the settings relating to images and audio [Image/Audio]
- 2.5.1 Configure the settings relating to the image capture mode [Image]
- 2.5.2 Configure the settings relating to JPEG images [Image]
- 2.5.3 Configure the settings relating to Stream [Image]
- 2.5.4 Configure the settings relating to image adjust, zoom/focus, privacy zone, VIQS, and lens distortion compensation [Image quality]
- 2.5.4.1 Configure the settings relating to image quality (“Image adjust” setup menu)
- 2.5.4.2 Set mask areas
- 2.5.4.3 Adjust the zoom and focus
- 2.5.4.4 Configure the settings relating to the privacy zone (“Privacy zone” setup menu)
- 2.5.4.5 Configure the VIQS setting
- 2.5.4.6 Configure the VIQS area
- 2.5.4.7 Configure the settings relating to lens distortion compensation
- 2.5.5 Configure the settings relating to audio [Audio]
- 2.6 Configure the multi-screen settings [Multi-screen]
- 2.7 Configure the alarm settings [Alarm]
- 2.7.1 Configure the settings relating to the alarm action [Alarm]
- 2.7.2 Configure the settings relating to the output terminal [Alarm]
- 2.7.3 Change the AUX name [Alarm]
- 2.7.4 Configure the settings relating to the camera action on alarm occurrence [Alarm]
- 2.7.4.1 Configure settings relating to image quality on alarm action
- 2.7.4.2 Configure settings relating to alarm E-mail notifications
- 2.7.4.3 Configure settings relating to FTP transmissions of alarm images
- 2.7.4.4 Configure settings relating to recording to an SD memory card when an alarm occurs
- 2.7.4.5 Configure settings relating to Panasonic alarm protocol notification when an alarm occurs
- 2.7.4.6 Configure settings relating to HTTP alarm notification when an alarm occurs
- 2.7.5 Configure the VMD settings [VMD area]
- 2.7.6 Set the VMD areas [VMD area]
- 2.7.7 Configuration of the settings relating to alarm notification [Notification]
- 2.8 Configure the settings relating to the authentication [User mng.]
- 2.9 Configuring the network settings [Network]
- 2.9.1 Configure the network settings [Network]
- 2.9.2 Configure advanced network settings [Advanced]
- 2.9.2.1 Configure the settings related to sending E-mails
- 2.9.2.2 Configure the settings related to FTP transmission
- 2.9.2.3 Configure the settings relating to the NTP server
- 2.9.2.4 Configure the UPnP settings
- 2.9.2.5 Configure the HTTPS settings
- 2.9.2.6 Configure the settings relating to DDNS
- 2.9.2.7 Configure the settings relating to SNMP
- 2.9.2.8 Configure the QoS settings
- 2.9.3 How to configure HTTPS settings
- 2.9.4 Access the camera using the HTTPS protocol (for pre-installed certificate)
- 2.9.5 Access the camera using the HTTPS protocol (for CA Certification)
- 2.9.6 How to configure the settings relating to DDNS
- 2.10 Configure the settings relating to the schedules [Schedule]
- 2.11 Maintenance of the camera [Maintenance]
- 2.12 Display the Panasonic support website [Support]
- 3 Others
Information Bar
The “Information Bar” (A) expressed in the following symptom and solutions will be displayed just below the
address bar only when there is information to communicate.
A
Depending on the OS installed on the PC, the following may occur. Follow the instructions below when the
following has occurred. By performing the following solutions, other applications may not be affected.
Symptom
Cause/solution Reference pages
The following message is
displayed on the information
bar.
“Internet Explorer blocked a
pop-up from ***.***.***.*** (IP
address).”
• Select “Options for this site” ® “Always allow”.
-
The following message is
displayed on the information
bar.
“This webpage wants to run
the following add-on:
`WebVideo Module' from
`Panasonic Corporation`.”
• Select [Allow].
-
The following message is
displayed on the information
bar.
“This webpage wants to install
the following add-on:
`nwcv4Ssetup.exe' from
`Panasonic Corporation`.”
• Select [Install]. The “Security Warning” window
will be displayed. Click the [Install] button on the
displayed “Security Warning” window.
-
An unnecessary status bar or
scroll bar is displayed on the
pop-up window.
• Click “Internet Options...” under “Tools” of the
menu bar of Internet Explorer, and then click the
[Security] tab. Click “Internet” in the “Select a
Web content zone to specify its security
settings.” section. Then, click the [Custom
level…] button to open the “Security Settings”
window. Under “Miscellaneous”, select “Enable”
for “Allow script-initiated windows without size or
position constraints”. Click the [OK] button.
When the warning window is displayed, click the
[Yes] button.
-
Operating Instructions 235
3 Others