Important Information Network Camera Model No. WV-S2231L / WV-S2211L WV-S2131L / WV-S2131 WV-S2130 WV-S2111L / WV-S2110 WV-S2131L WV-S2131L * For information about the installation tasks, refer to the provided Installation Guide. For information about how to perform the settings and how to operate the camera, refer to the Operating Instructions on the provided CD-ROM. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
Contents Limitation of liability........................................................................................................................ 3 Disclaimer of warranty.................................................................................................................... 3 Preface........................................................................................................................................... 4 About notations....................................................
Limitation of liability THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT. THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
Preface This product is an indoor use dome-type monitoring camera with a 10BASE-T/100BASE-TX network port for network connection. By connecting to a network (LAN) or the Internet, images and audio from the camera can be monitored on a PC via a network. Note: • It is necessary to configure the network settings of the PC and its network environment to monitor images from the camera on the PC. It is also necessary to install a web browser on the PC.
Main functions Delivers high image quality streaming at low bit rates thanks to a H.265 engine equipped with Panasonic's own Smart Facial Coding technology*1. This allows H.265 compression in addition to conventional H.264 compression technology, and when combined with Smart Facial Coding, reduces data load compared to our previous models.
About the user manuals Product documentation is composed of the following documents. • Important Information (this document): Provides basic information about the product. • Installation Guide: Explains installation, mounting, cable connections, and adjusting the field of view. • Operating Instructions (included in the CD-ROM): Explains how to perform the settings and how to operate this camera. Adobe® Reader® is required to read these operating instructions on the provided CD-ROM.
IMPORTANT: • For information on the operation verification of the supported operating systems and web browsers, refer to our website at http://security.panasonic.com/support/info/. • When using a PC that does not meet the above requirements, displaying of images may become slower or the web browser may become inoperable. • Audio may not be heard if a sound card is not installed on a PC. Audio may be interrupted depending on the network environment.
Open Source Software • This product contains open source software licensed under GPL (GNU General Public License), LGPL (GNU Lesser General Public License), etc. • Customers can duplicate, distribute and modify the source code of the software under license of GPL and/or LGPL. • Refer to the “readme.txt” file on the provided CD-ROM for further information about open source software licenses and the source code.
Precautions Do not attempt to disassemble or modify this product. Failure to observe this may cause fire or electric shock. Consult the dealer for the repair or inspections. Do not insert any foreign objects. Fire or electrical shock may be caused if water or any foreign objects, such as metal objects, enter inside the unit. Turn the power off immediately and contact qualified service personnel for service.
[Precautions for use] The screws and bolts must be tightened to the specified torque. Failure to observe this may cause a drop resulting in injury or accidents. When the product is accessible from the Internet To prevent unauthorized access, note the following. • Leave user authentication turned on. • Periodically change passwords that are used to access the product. Refer to the Operating Instructions on the provided CD-ROM for information about how to change passwords.
About the MOS image sensor • When continuously shooting a bright light source such as a spotlight, the color filter of the MOS image sensor may become deteriorated and this may cause discoloration. Even when changing the fixed shooting direction after continuously shooting a spotlight for a certain period, the discoloration may remain. • When shooting fast-moving subjects or objects crossing the shooting area may look to be bending askew. When an error is detected, this product will restart automatically.
AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
Precautions for installation Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. For information about the installation tasks, refer to the provided Installation Guide.
Screw tightening • The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the installation area. • Do not use an impact driver. Use of an impact driver may damage the screws or cause tightening excessively. • When a screw is tightened, make the screw at a right angle to the surface. After tightening the screws or bolts, perform checks to ensure that the tightening is sufficient enough so that there is no movement or looseness.
Parts and functions 【Whole unit】 * This illustration represents WV-S2131L Built-in microphone port Enclosure Azimuth adjustment ring Camera Attachment plate (accessory) S2130 Inner cover Dome cover Panning table Tilting table Camera fixing screw S2111L S2131L External I/O terminal plug (accessory) 【Camera body】 * This illustration represents WV-S2131L Direction marker for installation (TOP⇧) Points up when installing to a wall.
【Camera body (continued)】 * This illustration represents WV-S2130 Built-in microphone S2130 ⇩ Indicators and buttons (☞ page 21) Pan table fixing screw with washer Direction marker for installation (FRONT⇩) FRONT should face the camera front (the side of the Panasonic logo).
■ Terminals * This illustration represents WV-S2131L ANetwork connector (RJ45) B 12 V DC power supply terminal S2131L S2111L DAudio output connector S2131L S2111L CAudio input connector S2131L S2111L EEXT I/O terminals S2131L S2111L FMONITOR OUT terminal (factory shipment: NTSC monitor) ANetwork connector (RJ45) Connect an Ethernet cable (category 5e or better) to the network connector. IMPORTANT: Use all 4 pairs (8 pins) of the Ethernet cable.
B12 V DC power supply terminal S2131L S2111L Caution: A READILY ACCESSIBLE DISCONNECT DEVICE SHALL BE INCORPORATED TO THE EQUIPMENT POWERED BY 12 V DC POWER SUPPLY. ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/UL/CSA 60950-1). Connect the output cable of the DC power supply to the power cable plug (accessory). IMPORTANT: Be sure to use the power cable plug (accessory) provided with this product.
EEXT I/O terminals S2131L S2111L Note: Off, input, and output of the external I/O terminal 2 and 3 can be switched by configuring the setting. Refer to the Operating Instructions on the provided CD-ROM for further information about the EXT I/O terminal 2 and 3 (ALARM IN2, 3) settings ("Off", "Alarm input", "Alarm output" or "AUX output").
When connecting to a network using a PoE hub Before starting the installation, check the entire system configuration. The following illustration gives a wiring example of how to connect the camera to the network via a PoE device (hub). *A microphone and speaker cannot be connected to WV-S2130 and WV-S2110.
■ Indicators and buttons S2131L FSD ON/OFF button GAF button HTELE button AINITIAL SET button (Initializing / NTSC ⇔ PAL switch button) BLINK indicator CACT indicator ESD ERROR/AF indicator DSD MOUNT indicator IWIDE button SD memory card slot (SD) S2111L FSD ON/OFF button GAF button AINITIAL SET button (Initializing / NTSC ⇔ PAL switch button) BLINK indicator CACT indicator ESD ERROR/AF indicator DSD MOUNT indicator SD memory card slot (SD) AINITIAL SET button (Initializing / NTSC ⇔ PAL switch but
AINITIAL SET button (Initializing / NTSC ⇔ PAL switch button) Follow the steps below to initialize the network camera. ⑴Turn off the power of the camera. When using a PoE hub, disconnect the Ethernet cable from the camera. When using an external power supply, disconnect the power cable plug (accessory) from the 12 V DC power supply terminal. S2131L S2111L ⑵Turn on the power of the camera while pressing the INITIAL SET button, and make sure to release the button after approximately 15 seconds.
ESD ERROR/AF indicator S2131L S2111L When AF (Auto Focus) operation is being executed When the set is being started When an SD memory card is recognized normally When the SD card slot is not used or an abnormality is detected in SD card after the camera has started AF indicator Blinks red (Interval of 1 time/ second) Lights red Lights red → Lights off Lights red → Stays red S2130 When AF (Auto Focus) operation is being executed When the set is being started Blinks red (Interval of 1 time
Insert / remove an SD memory card *WV-S2231L / WV-S2131L / WV-S2131 / WV-S2211L / WV-S2111L only Note: Refer to the Operating Instructions on the provided CD-ROM for further information about the SD memory card settings. ■ Insert an SD memory card 【１】Remove the enclosure from the camera, insert an SD memory card fully into the SD memory card slot until a click is heard.
Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Symptom Power is not turned on. Cause/solution When using a PoE device for power supply • Are the PoE device and the network connector connected using an Ethernet cable (category 5e or better)? Check whether the connection is appropriately established.
Symptom Cause/solution Audio input contains noise. • Check the following. • Grounding of the camera, a switching hub or peripheral devices are not done. • The camera is used near an electrical power line. • The camera is used near a device which produces strong magnetic field or radio waves (such as near a TV/radio antenna, a motor of an air conditioning system, a transformer, etc.
Specifications • Basic Power source *1: Power consumption *1: Operating environment Ambient operating temperature: Ambient operating humidity: Storage environment Storage temperature: Storage humidity: Monitor output (for adjustment): External I/O terminals: S2131L S2111L Built-in microphone: Audio input: S2130 DC 12 V S2131L S2111L PoE (IEEE802.3af compliant) WV-S2231L / WV-S2211L / WV-S2131L / WV-S2111L DC 12 V : 560 mA/Approx. 6.8 W PoE DC 48 V : 150 mA/Approx. 7.
Finish: Others: WV-S2231L / WV-S2211L Main body : Aluminum die cast (Sail white) Dome cover : Clear polycarbonate resin WV-S2131L / WV-S2131 / WV-S2130 / WV-S2111L / WV-S2110 Main body : ABS resin (Sail white) Dome cover : Clear acrylic resin Tamper-resistant enclosure*3 (WV-S2231L / WV-S2211L only *1 Refer to our website (http://security.panasonic.com/support/info/) for further information about Power source and Power consumption information. *2 The audio output can be switched to the monitor output.
Maximum gain (AGC): Adaptive black stretch: Back light compensation (BLC) /High light compensation (HLC): Fog compensation: Light control mode setting: Shutter speed: Maximum shutter: Color/BW: S2131L S2111L Day/Night (Electrical): The level can be set in the range of 0 to 11. The level can be set in the range of 0 to 255.
Digital (electronic) zoom: Focal length: Maximum aperture ratio: Focus range: Aperture range: Angular field of view: Adjusting angle: Choose from 3 levels of x1, x2, x4 2.8 mm – 10 mm {1/8 inches – 13/32 inches} 1:1.6 (WIDE) – 1:3.4 (TELE) 0.3 m {11-13/16 inches} – ∞ F1.
Image compression method *3: H.265/ H.264 Transmission priority: Constant bit rate / Variable bit rate / Frame rate / Best effort Frame rate: 1 fps/ 3 fps/ 5 fps*/ 7.5 fps*/ 10 fps*/ 12 fps*/ 15 fps*/ 20 fps*/ 30 fps*/ 60 fps* * The frame rate is limited to “bit rate”. When a value with an asterisk (*) is selected, the actual frame rate may be lower that the value selected.
Security User authentication / Host authentication / HTTPS* / Alteration detection of video file* * The certification is pre-installed. OS*5: Microsoft Windows 10 Microsoft Windows 8.
For U.S. and Canada: For Europe and other countries: Panasonic System Communications Company of North America, Unit of Panasonic Corporation of North America Panasonic Corporation Two Riverfront Plaza, Newark, NJ 07102-5490 Authorised Representative in EU: Panasonic Canada Inc. Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany www.panasonic.com/business/ For customer support, call 1.800.528.
