Installation Guide Network Camera WV-SF336, WV-SF335 WV-SF332 WV-SF336E, WV-SF335E WV-SF332E Model No. WV-SF336 (This illustration represents WV-SF336.) Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual.
WARNING: • Apparatus shall be connected to a mains socket outlet with a protective earthing connection. • The mains plug or an appliance coupler shall remain readily operable. • To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture. • The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be placed on the apparatus.
We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives 2006/95/EC and 2004/108/EC. Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit den folgenden Normen oder normativen Dokumenten übereinstimmt. Gemäß den Bestimmungen der Richtlinie 2006/95/EC und 2004/108/EC.
Contents Important safety instructions.......................................................................................................... 5 Limitation of liability........................................................................................................................ 6 Disclaimer of warranty.................................................................................................................... 6 Preface.......................................................................
Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Limitation of liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT. THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
Preface The network cameras WV-SF330 series are designed to operate using a PC on a network (10BASE-T/100BASE-TX). By connecting to a network (LAN) or the Internet, images and audio from the camera can be monitored on a PC via a network.
Important: • When the wide dynamic range function is activated, noise may be increased in the dark area of the object. Auto focus (AF) function SF336 It is possible to adjust the focus automatically by moving the focus ring of the lens with the operation button of this camera or the setup menu. Focus assist (F. A.) function SF335 SF332 During the manual focus adjustment, this function indicates the best focus position.
System requirements for a PC CPU: Memory: Network Interface: Audio Interface: Monitor: OS: Web browser: Other: Intel® CoreTM2 Duo 2.4 GHz or faster recommended 512 MB or more (A minimum of 1 GB memory is required when using Microsoft® Windows® 7 or Microsoft® Windows Vista®.
Trademarks and registered trademarks • Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Intel and Intel Core are trademarks or registered trademarks of Intel Corporation in the United States and other countries.
Precautions Refer installation work to the dealer. Installation work requires technique and experiences. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer. Avoid installing this bracket in the locations where salt damage occurs or corrosive gas is produced. Otherwise, the mounting portions will deteriorate and accidents such as a fall of this product may occur. Stop the operation immediately when something is wrong with this product.
Turn the power off when cleaning of this product. Failure to observe this may cause injury. [Precautions for use] This product is designed to be used indoors. This product is not operable outdoors. This product has no power switch. When turning off the power, turn off a circuit breaker. To keep on using with stable performance Do not use this camera in hot and humid conditions for a long time. Failure to observe this causes component degradation resulting in life shortening of this product.
• When using an unformatted SDHC/SD memory card, format it using this camera. Recorded data on the SDHC/SD memory card will be deleted when formatted. If an unformatted SDHC/SD memory card or an SDHC/SD memory card formatted with other devices is used, this product may not work properly or performance deterioration may be caused. Refer to the Operating Instructions (PDF) for how to format a SDHC/SD memory card.
Precautions for Installation Installation work shall be performed in accordance with the technology standard of the electric installation. This camera is designed to be used indoors. This product is not operable outdoors. Do not expose this camera to direct sunlight for hours and do not install the product near a heater or an air conditioner. Otherwise, it may cause deformation, discoloration and malfunction. Keep this camera away from water and moisture.
Radio disturbance When this product is used near TV/radio antenna, strong electric field or magnetic field (near a motor, a transformer or a power line), images may be distorted and noise sound may be produced. PoE (Power over Ethernet) Use a PoE hub/device that is compliant with IEEE802.3af standard. Router When connecting this product to the Internet, use a broadband router with the port forwarding function (NAT, IP masquerade).
Major operating controls Dome cover Inner dome Clear dome (Provided only for service) Monitor out connector for service* Direction marker for installation Azimuth adjustment ring Marker FRONT TOP MONITOR OUT EXT Monitor out connector for adjustment (RCA jack) View from the side BASE-T/ BASE TX TOP LOCK Tilting table 12V IN Panning lock screw [LOCK] 12 V DC power supply terminal Panning table * This connector is provided only for service.
SDHC/SD memory card slot Access indicator (blinking at accessing) Link indicator (lighting at linking) Focus assist (F.A.) button SF335 SF332 INITIAL SET button Auto focus (AF) button SF336 AF FOCUS ASSIST SDHC/SD memory card error indicator/AF indicator (Blinks when AF is being adjusted) SF336 SDHC/SD memory card error indicator/F.A.
Detaching the dome cover Important: • After removal, retain the dome cover fixing screw so as not to lose. The screw is required when attaching the dome cover. (☞ Page 34) • Remove the cover film from the dome section of the dome cover after the installation is complete. Do not touch the dome section by hand directly after removing the cover film. z Remove the dome cover fixing screw (M3, LOCK OPEN ADJUST step screw, x1).
Preparations When installing the camera on a wall or a ceiling, there are four methods as specified below. (☞ Pages 20 and 21).
Using the side cable access hole When installing the camera directly on the ceiling or wall with cables exposed or when using the optional ceiling mount bracket WV-Q168, cut out a portion of the dome cover to open a cable access hole. Side cable access hole Side cable access hole Method of camera installation Using the two-gang junction box Mount the camera on the two-gang junction box by fixing 4 screws (locally procured).
Installing the camera directly on the ceiling or wall Place the installation template label (accessory) on the ceiling or wall, and make a hole to pass the cable. Remove the template label, and mount the camera by fixing 4 screws (locally procured). (☞ Page 28 ) Direction marker for installation Recommended screw (M4: 4 pcs.) MO NIT OR OU T 20 mm {13/16"} I/O 1 EXT 2 3 Cable access hole for ceiling/wall 4 83.
Insert/remove an SDHC/SD memory card Important: • Before inserting the SDHC/SD memory card, turn off the power of the camera first. • When inserting an SDHC/SD memory card, make sure the direction. • Before removing the SDHC/SD memory card, select "Not use" for "SD memory card" on the [SD memory card] tab of the setup menu first. Turn off the power after "Not use" selection, and then unload the SDHC/SD memory card.
Connection Caution: • FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY. Before starting the connection, turn off the power of this camera and the devices to be connected. Check and prepare the required devices and cables for connection.
Important: • Connect/disconnect the audio cables and turn on the power of the camera after turning off the power of the audio output devices. Otherwise, loud noise may be heard from the speaker. c Connect an external speaker with amplifier to the audio output connector (for use of the audio transmission function). Connect a stereo mini plug (ø3.5 mm) (monaural output).
Important: • Do not connect 2 wires or more directly to a terminal. When it is necessary to connect 2 wires or more, use a splitter. • Connect an external device with verifying that the ratings are within the specifications above. • When using the EXT I/O terminals as the output terminals, ensure they do not cause signal collision with external signals.
Important: • Be sure to use the power cord plug provided with this product. • Be sure to fully insert the power cord plug into the 12 V DC power supply terminal (accessory). Otherwise, it may damage the camera or cause malfunction. • Be sure to use an AC adaptor compliant with the Specifications regarding power source and power consumption (☞ page 39). t Run the 12 V DC output cable through the gap of the cable hook. 12 V DC output cable Cable hook 12V= IN When using PoE (IEEE802.
Connection example when connecting to a network using a PoE hub Speaker with amplifier (option) Video monitor (for adjustment use only) PoE device (hub) LAN cable (category 5 or better, straight, STP*) Microphone (option) LAN cable (category 5 or better, straight, STP*) Speaker with amplifier (option) Microphone (option) PC LAN cable (category 5 or better, straight, STP*) Video monitor (for adjustment use only) LAN cable (category 5 or better, straight, STP*) * PAL models only Impo
Installation Camera mounting Installation shall be conducted after turning off each device. z Detach the dome cover. (☞ Page 18) x Connect the cables to the camera. (☞ Pages 23 to 27) As necessary, use a cable tie (accessory) to assemble the cables. c Mount the camera. (The illustration represents the case in which a two-gang junction box is installed.
Adjustment z Adjust the camera angle. When determining the camera angle, repeat fine adjustments by gradually moving the panning table, tilting table, and azimuth adjustment ring. Horizontal position (Panning) Loosen the panning lock screw, rotate the panning table to adjust the pan direction. (Adjustable range: 350 °) Panning is possible within the range of 180 ° (when panning clockwise) and 170 ° (when panning counterclockwise). After adjustment, tighten the panning lock screw to fix the panning table.
Note: • When the camera is used at an angular field of view that is close to horizontal, it must be noted that the shadow of the dome cover may be projected. Image tilt adjustment Rotate the azimuth adjustment ring to adjust the azimuth angle of the image. (Adjustable range: ±100 °) Adjustable range –100 ° +100 ° FRONT TOP EXT MONITOR OUT BASE-T/ BASE TX LOCK 12V=IN x Adjust the angular field of view and the focus.
w When the auto focus (AF) button on the lateral side of camera is pressed, the auto focus (AF) indicator will light for around 10 seconds, and the focus is automatically adjusted. Important: • Do not move the focus ring. Note: • If the zoom lock knob is slightly fastened before the zoom ring is moved, the ring will become stable to ease the fine adjustment. • When positioning the zoom ring at a step short of the "T" (or "W") end, the focus adjustment will be easier.
Adjust the angular field of view and the focus. SF335 SF332 The angular field of view and focus can be adjusted in accordance with the distance between the camera lens and a photographic subject. These adjustments shall be performed together with the camera angle adjustment. FOCUS ADJUSTMENT Focus assist (F.A.) button LOW HIGH .......|............
Note: q When shooting the following subjects, close the "FOCUS ADJUSTMENT" menu by pressing the focus assist (F.A.) button again, or adjust the focus to obtain the best focus position while monitoring images from the camera. • Subj. moving frequently or having large illuminance change • Subj. with low illuminance • Subj. with reflection or extra brightness • Subj. through a window • Place where the lens easily becomes dirty • Subj. with less contrast such as white wall • Subj.
Attaching the dome cover Marker z Align the indication "OPEN" to the maker of the camera to attach the dome cover. Dome alignment indication "OPEN" LOCK OPEN ADJUST Dome cover Dome section x Remove the cover film from the dome cover except the dome section. c Adjust the direction of the inner dome (☞ page 16). Rotate the dome cover clockwise to adjust the marker to "ADJUST". The clear dome and the inner dome can rotate together in this state.
Important: • For inner dome adjustments, adjust the marker to the "ADJUST" position. If the dome section is moved with unreasonable force from the "LOCK" position, this may be a cause of destruction. v Rotate the dome cover clockwise to adjust the marker to "LOCK". OPEN LOCK ADJUST b Fix the dome cover and camera by tightening the dome cover fixing screw (M3, step screw, x1).
Configure the network settings Install the software Before installing the software, refer to the readme file on the provided CD-ROM first. Software included on the provided CD-ROM • Panasonic IP setting software Configure the network settings of the camera. Refer to the following for further information. • Viewer Software "Network Camera View 4" It is necessary to install the viewer software "Network Camera View 4" to display images on a PC.
z Start the Panasonic IP setting software. x Click the [IP setting] button after selecting the MAC address/IP address of the camera to be configured. Note: • When using a DHCP server, the IP address assigned to the camera can be displayed by clicking the [Refresh] button of the IP setting software. • When a duplicate IP address is used, the corresponding MAC address/IP address will be displayed shaded. c Complete each network setup item and click the [Apply] button.
Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Symptom Power is not turned on. 38 Cause/solution When using DC power supply • Is 12 V DC power supply connect to the power supply terminal? → Check whether the connection is appropriately established.
Specifications ● Basic Power source: 12 V DC, PoE (IEEE802.3af compliant) Power consumption: WV-SF336 12 V DC*: 320 mA, PoE: 4.2 W (Class 2 device) WV-SF335, WV-SF332 12 V DC*: 280 mA, PoE: 3.5 W (Class 2 device) * FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY. Ambient operating temperature: –10 °C to +50 °C {14 °F to 122 °F} (no condensation) Ambient operating humidity: Less than 90 % Monitor output (for adjusting the angular field of view): VBS: 1.
WV-SF332 (800×600) Color: 0.2 lx {0.02 footcandle} (F1.4, Auto slow shutter: Off (1/30 s), AGC: High) 0.013 lx {0.0013 footcandle} (F1.4, Auto slow shutter: max. 16/30 s, AGC: High)* BW: 0.13 lx {0.013 footcandle} (F1.4, Auto slow shutter: Off (1/30 s), AGC: High) 0.009 lx {0.0009 footcandle} (F1.4, Auto slow shutter: max.
Resolution: (WV-SF332) Aspect ratio: 4:3 H.264 800 × 600/VGA (640 × 480)/QVGA (320 × 240), max. 30 fps MPEG-4 VGA (640 × 480)/QVGA (320 × 240), max. 30 fps JPEG 800 × 600/VGA (640 × 480)/QVGA (320 × 240), max. 30 fps Aspect ratio: 16:9 H.264 640 × 360/320 × 180, max. 30 fps JPEG 640 × 360/320 × 180, max. 30 fps * MPEG-4 is not supported. Image compression method*1 *2: H.
Multi-screen: Compatible SDHC/SD memory card (option): Up to 16 camera images can be displayed simultaneously on a multi-screen. Manufactured by Panasonic SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB SD memory card: 256 MB, 512 MB, 1 GB, 2 GB (except miniSD card and microSD card) *1 Either H.264 or MPEG-4 is selectable. *2 Transmission for 2 streams can be individually set in the same compression method.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
For U.S. and Canadian fields: For European and other fields: Panasonic System Networks Company of America, Unit of Panasonic Corporation of North America Panasonic Corporation www.panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic Way, Secaucus, New Jersey 07094 U.S.A. http://panasonic.net Importer's name and address to follow EU rules: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg F.R.Germany Panasonic Canada Inc.
