Installation Guide

18
Using a two-gang junction box
• Secure the camera attachment (accessory) to the two-gang junction box built in a wall or ceil-
ing using the fixing screws (accessory).
Note:
• For wall mounting:
The camera attachment (accessory) shall be mounted with "TOP" facing upward.
• For ceiling mounting:
The camera attachment (accessory) shall be mounted with "FRONT" facing in the direction of
the camera front (the side where the Panasonic logo is).
FRONT
TOP
FRONT
TOP
46 mm {1-13/16 inches}
Two-gang junction box
Camera attachment (accessory)
Fixing screws (accessory)
83.5 mm {3-9/32 inches}
[Mounting hole pattern]