DEUTSCH WV-CP220/WV-CP222/WV-CP224 ENGLISH Colour CCTV Cameras WV-CP222 WV-CP224 (Lens : option) Before attempting to connect or operate this product, please read these instructions completely.
ENGLISH VERSION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is interned to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives EEC/73/23 and EEC/89/336. The wires in this mains lead are coloured in accordance with the following code.
CONTENTS PREFACE ........................................................................................................................................................................ 3 FEATURES ...................................................................................................................................................................... 3 PRECAUTIONS ......................................................................................................................................
PREFACE FEATURES Panasonic's WV-CP220 Series camera introduce a new low end colour camera through the use of 1/3 inch interline transfer CCD. Minimum illumination is achieved 0.5 lx with the use of newly developed aspherical high speed lenses. ATW (Automatic Tracing White Balance) System is incorporated into the WV-CP220 series.
PRECAUTIONS • Do not attempt to disassemble the camera. To prevent electric shock, do not remove screws or cover. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. • Never face the camera toward the sun. Whether the camera is in use or not, never face it toward the sun. Do use caution when operating the camera in the vicinity of spot lights or other bright lights and light reflecting objects. • Handle the camera with care. Do not abuse the camera.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS (7) (8) (6) (1) (4) (9) (11) ! (5) WV-CP220 (3) (10) @ (5) (2) (5) WV-CP222 -5- WV-CP224
(6) AC Power Cord (1) Auto Iris Lens Connector This 4-pin connector supplies the power and DC control signal to the auto iris lens. (7) Sync Selection Switch (LL/INT) (WV-CP220/WV-CP224) This switch is used to select the camera synchronization mode. INT: The camera synchronization mode is set to internal 2 : 1 interlace. LL: The camera synchronization mode is set to Line-lock. (2) Flange-back Adjusting Ring This ring is used to adjust the back focal length or picture focus by rotating this ring.
(10) DC 12V In Terminal (DC 12V IN) This terminal accepts 12V DC power source (10.5V - 16V). (11) AC 24V In Terminal (AC 24V IN) This terminal accepts 24V AC power source (19.5V - 28V). Be sure to connect grounding lead to the GND terminal.
• Calculation method of maximum cable length between camera and power supply. CONNECTIONS A. WV-CP220 10.5V DC ≤ VA − (R x 0.42 x L) ≤ 16V DC 1. Connect the AC Power Cord to a electrical outlet of 220 - 240V AC 50 Hz. L : Cable length (m) R : Resistance of copper wire (Ω/m) B. WV-CP222 VA : DC output voltage of power supply unit 1. A power supply of 12V DC is required. 2. Connect the power cable to the DC 12V In Terminal on the rear panel of the camera.
C. WV-CP224 Video Cable 1. A power supply of 24V AC 50 Hz is required. 2. Connect the power cable to the AC 24V In Terminal on the rear panel of the camera. AC 24V IN 1. It is recommended to use a video monitor whose resolution is at least equal to the camera's. 2. Terminate the camera output with 75Ω resistor at the furthest end of its cable run. A. Use 75Ω coaxial cable. B.
Table 1 Type of coaxial cable Recommended maximum cable length RG-59/U (3C-2V) RG-6U (5C-2V) RG-11/U RG-15/U (7C-2V) (10C-2V) (m) 250 500 600 800 (ft) 825 1,650 1,980 2,640 3. Wiring precautions: • Do not bend coaxial cable into a curve whose radius is smaller than 10 times the cables diameter. • Never staple the cable-not even with circular staples. Mismatching will occur. • Never crush or pinch the cable. All of these will change the impedance of the cable and cause poor picture quality.
LENSES 1. Selection of Lens Models Specifications WV-LA2.8 (Wide Angle) WV-LA6A (Wide Angle) Image Size WV-LA12A (Standard) WV-LA18 (Telephoto) WV-LA36 (Telephoto) 1/2" (6.4 (H) x 4.8 (V) mm) Focal Length 2.8 mm 6 mm 12 mm 18 mm 36 mm Maximum Aperture Ratio 1 : 1.4 1 : 1.4 1 : 1.4 1 : 1.4 1 : 1.8 43.5° 22.2° 15.5° 7.7° 32.9° 16.7° Angular Field H 87.5° of View 1/3" V 69.2° Focusing Range Adjusted by Camera Mount Filter Size Dimensions Weights 11.5° 5.
Models Specifications Image Size WV-LZ81/10 (Motorized Zoom) 1/3" (4.8 (H) x 3.6 (V) mm) 4.5 mm 9 mm 6 - 60 mm (10X) 1 : 1.2 (Wide) 1 : 1.3 (Tele) 1 : 1.4 (Wide) 1 : 1.7 (Tele) 1 : 1.2 1 : 1.2 1 : 1.6 (Wide) 1 : 2.6 (Tele) H Wide : 31.4° Tele : 5.5° Wide : 33.5° Tele : 3.5° 56.4° 29.6° Wide : 43.7° Tele : 4.6° V Wide : 23.5° Tele : 4.1° Wide : 25.2° Tele : 2.6° 43.3° 22.2° Wide : 33.0° Tele : 3.5° 1m - ∞ (3.3 ft - ∞) 1.1m - ∞ (3.6 ft - ∞) M49 mm, P = 0.
Models WV-LA4510 (Wide Angle) WV-LA608 (Wide Angle) Focal Length 4.5 mm 6 mm 12 mm 8.5 - 51 mm (6X) Maximum Aperture Ratio 1 : 1.0 1 : 0.75 1 : 0.8 1 : 0.8 (Wide) 1 : 1.0 (Tele) H 56.9° 43.8° 23.8° Wide : 31.3° Tele : 5.5° V 43.6° 33.1° 17.6° Wide : 23.4° Tele : 4.1° Specifications Image Size Angular Field of View 1/3" Weights 1.2m - ∞ (4.0 ft - ∞) Adjusted by Camera Mount Dimensions WV-LZ83/6 (Motorized Zoom) 1/2" (6.4 (H) x 4.
Models Specifications WV-LA210C3 (Wide angle) WV-LA408C3 (Wide angle) Image Size WV-LA908C3 (Standard) 1/3" (4.8(H) x 3.6(V) mm) Focal Length 2.1 mm 4.5 mm 9 mm Maximum Aperture Ratio 1 : 1.0 1 : 0.75 1 : 0.75 Angular Field H 107.6° 57.2° 31.3° of View V 88.0° 43.7° 23.5° Focusing Range Adjusted by Camera Mount CS-mount, 1"-32UN Filter Size Dimensions Weight None M40.5 mm, P=0.5 M40.5 mm, P=0.5 62.
Models Specifications WV-LM4R5A (Wide Angle) Image Size WV-LF6 (Wide Angle) WV-LF12 (Standard) WV-LF4R5C3A (Wide Angle) 1/2" (6.4 (H) x 4.8 (V) mm) WV-LF9C3A (Standard) 1/3" (4.8 (H) x 3.6 (V) mm) Focal Length 4.5 mm 6 mm 12 mm 4.5 mm 9 mm Maximum Aperture Ratio 1 : 1.4 1 : 1.4 1 : 1.4 1 : 1.2 1 : 1.2 Angular Field H 56.9° 43.5° 22.2° 56.4° 29.6° of View 1/3" V 43.6° 32.9° 16.7° 43.3° 22.
Caution: Always set the Flange-back adjusting ring to fully clockwise by loosing screws on the ring before mounting the lens, otherwise the inner glass and CCD image sensor could be damaged by the lens. (1) Mount the lens by turning it clockwise onto the lens mount of the camera. (2) Connect the lens cable to the Auto Iris Lens Connector on the camera when an auto iris lens is used. 2.
INSTALLATION OF CAMERA • Mounting from the bottom • Mounting from the top This camera is originally designed to be mounted from the bottom, as shown. The hole is the standard photographic pan-head screw size (1/4” 20). Remove the mount adaptor from the bottom of the camera by removing two fixing screws. Attach the mount adaptor to the top as shown in the diagram, then mount the camera on the mounting bracket.
FOCUS OR FLANGE-BACK ADJUSTMENT PREVENTION OF BLOOMING AND SMEAR The following adjustment should be made by qualified service personnel or system installers. When the camera is faced toward spot light or other bright lights and light reflecting objects, smear or blooming may appear. Therefore, the camera should be operated carefully in the vicinity of extremely bright objects to avoid smear or blooming. 1. Loosen screws on the flange-back adjusting ring.
SPECIFICATIONS Pick-up Device: Scanning Area: Synchronization: Scanning System: Scanning: Horizontal: Vertical: Horizontal Resolution: Video Output: Signal-to-Noise Ratio: Electronic Light Control: Minimum Illumination: Detail: Lens Mount: Ambient Operating Temperature: Ambient Operating Humidity: Power Source: 512 (H) x 582 (V) pixels, Interline Transfer CCD 4.8 (H) x 3.
Power consumption: Dimensions (without lens): Weights (without lens): WV-CP220/B, G: 3.9W WV-CP222E: 0.26A WV-CP224E: 3.5W 67 (W) x 65 (H) x 118 (D) mm WV-CP220/B, G: 680g WV-CP222E: 420g WV-CP224E: 450g Weights and dimensions indicated are approximate. Specifications are subject to change without notice. STANDARD ACCESSORY Body Cap .........................................................................1 pc. OPTIONAL ACCESSORIES Lenses : WV-LA2.
Matsushita Electric Industrial Co., Ltd. Central P.O.