User Manual

Contents

1. Introduction...............................................

2. Features...................................................

3. Safety Precautions………………………..

4. Meter Description.....................................

5. Electrical Specification.............................

6. Operation…………………………………..

7. AutoRanging Multimeter………………….

8. Multi-Network Modular Cable Tester……

1. Introduction

2 in 1 LAN Tester & Multimeter is a innovative tester that allows the

user easy to measure DC/AC Voltage/Current, Resistance,

Continuity, diode and verify the cable continuity, open short,

cross-connect. The included remote terminator allows the user to

test installed cable either at a wall jack or a patch panel adding up

to value and convenience. Proper use and care of this meter will

provide years of reliable service.

2. Features

• 2in1- LAN Tester & Multimeter

• Measures DC/AC Voltage, DC/AC Current, Resistance,

Continuity ,diode and LAN tester

• 3-1/2 digit (2000 count) LCD display for multimeter functions

• LED Displays the actual pin configuration of 10BASE-T

AND 10BASE-2 Thin Ethernet, FJ45/RJ11 modular,

258A, tia-568a/568b and Token Ring cables

• Double Molded housing

• CATIII 600V; CATII 1000V

• Provides easy to read continuity and fault status display

• Checks for continuity, open wire, ground wire, shorted pair

and crossed pair faults

• Allows for remote testing of installed cables from wall jack

or patch panel

•auto or manual scanning for LAN tester