User Manual

4
4. OPERATING INSTRUCTIONS
Use your known test magnet and move it to the probe,
which shall then light. If the test lamp does not light -
change the batteries.
1) First check the batteries according to the “functions
check” instructions up
2) Just touch the test object with the Magnet Tester probe.
If the lamp lights, the object is electrically active
3) It is not necessary to unscrew the test object from its
mounting on the equipment in order to carry out the test
– a magnetic coil can even be tested through its
protection cover
4) It is not necessary to stop the machinery or the
equipment in order to carry out the test
5) Sometimes stray magnetic fields from other nearby
equipment may cause the test lamp to blink momentarily.
Close to an activated magnetic coil, however, the test
lamp will give a fixed light.
6) Press and hold the black button, placing the tip of the
unit near a magnet field produces a steady red glow at
the tip.
7) Press and hold the back black button for flashlight on, if
button undo for flashlight off