User Manual


2
Safety Precautions
1. Improper use of this meter can cause damage, shock, injury or
death. Read and understand this users manual before operating
the meter.
2. Make sure any covers or battery doors are properly closed and
secured.
3. Always disconnect the test leads from any voltage source before
replacing the battery or fuses.
4. Do not exceed the maximum rated input limits.
Input Limits
Function Maximum Input
V DC or V AC 600V DC/AC
uA , mA AC/DC 200mA/500V fast acting
Resettable Fuse
Resistance, Diode &
Continuity Test
600V DC/AC
5. Use great care when making measurements if the voltages are
greater than 25VAC rms or 35VDC. These voltages are
considered a shock hazard.
6. Always discharge capacitors and remove power from the device
under test before performing Diode, Resistance or Continuity
tests.
7. Remove the battery from the meter if the meter is to be stored for
long periods.