User Manual


8
Non-Contact AC Voltage Measurements
1. Touch the probe tip to the hot conductor or insert into the hot side
of the electrical outlet.
2. If AC voltage is present, the detector light will illuminate.
NOTE: The conductors in electrical cord sets are often twisted.
For best results, rub the probe tip along a length of the
cord to assure placing the tip in close proximity to the
live conductor.
NOTE: The detector is designed with high sensitivity. Static
electricity or other sources of energy may randomly trip
the sensor. This is normal operation
Hold Button
The Data Hold function allows the meter to “freeze” a measurement
for later reference
3. Press the “DATA HOLD” button to “freeze” the display, the
“HOLD” indicator will appear.
4. Press the “DATA HOLD” button to return to normal operation.
Flashlight
Press and hold the top button to turn the flashlight on. Release the
button to turn the flashlight off.
AUTO POWER OFF
The auto off feature will turn the meter off after 15 minutes.
WARNING: Risk of Electrocution. Before use, always
test the Voltage Detector on a known live circuit to
verify proper operation