User Manual

1. Connect the test leads to the subject pair.
2. Use a handset or headset at the remote end and touch the wire end(s) with the clip lead(s).
3. Reception of tone is an indication of continuity.
MODULAR TESTING
1. All above tests are available through the modular plug for line 1 only-red and green wires.
COAX TESTING
1. To test unterminated coax, connect red to outer shield and black to center conductor or red to outer
shield and black to ground.
2. To test terminated coax, connect red to connector housing and black to center pin or red to connector
housing and black to ground.
MAINTENANCE
BATTERY REPLACEMENT INSTRUCTIONS
1. Separate the case, install a fresh 9V battery and reassemble. DO NOT OVERTIGHTEN.
2. Warranty limited solely to repair or replacement; no warranty of merchantability, fitness for a
particular purpose or consequential damages.