User's Manual

User’s Manual Wireless USB Adapter
10
In this utility, there are two applications can be selected : the Station mode and AP mode .
 Station mode (Client mode ) : it is the default access way , the USB wireless adapter services as a
client to acess Internet through other router or AP.
 AP mode : it sets the USB wireless adapter as an AP,which allows the other users can connect to
Internet through your computer. Before using the mode, it must be available that an existed Internet
connection via wire Ethernet connection or by 3G wireless connection.
Tips:Point the cursor to the Ralink icon location on bottom-right corner of your computer screen, right
click the mouse, from the pop up list, you can select the station mode or AP mode.
4) Below are the steps to connect to a wireless network using the Ralink Utility.
a. Open the Ralink Utility by double-clicking on the Ralink Utility icon in the taskbar.
b. The Ralink Utility appears ,by default connected to an available open wireless network. Check the
name of the network to which you are connected. If this is the correct network, no father steps are
required.
c. To connect to an alternative network ,click the Available Networks button.