Quick Start Guide

Pandigital Quick Start Guide
Initial Setup
View Slideshow from your Memory Source
Access HOME Screen
1
Remove the plastic insert
before using the Remote
Control.
Plug the power adapter
into a wall outlet and DPF.
Extend the stand on the
back of the frame to the
desired viewing angle.
Power ON the DPF
(switch is on the side
of DPF).
A slideshow will begin
displaying the photos
stored in the DPF’s
internal memory.
Insert your memory
card or USB Flash Drive
into the appropriate
media slot on the side
of the DPF.
A slideshow will begin
displaying the photos
stored on your memory
source.
To select a different memory
source, press EXIT until the
HOME screen is displayed,
and then press SETUP.
Power ON the DPF. The slideshow will
automatically begin
displaying the photos
stored on the selected
memory source.
Press the EXIT button
on the remote control
or DPF top-back panel
until the HOME screen
is displayed.
2 3 4
5
1
2 3 4
1 2 3
CUSTOMER SUPPORT
Updated documentation is available on our website: http://www.pandigital.net
Call us toll free: 1-800-715-5354
Use arrows to highlight
Select Media, and then
press ENTER.
5
Use arrows to highlight
the desired memory source,
(i.e., Internal Memory), and
then press ENTER.
Note: Sources not present
in DPF will not be available
for selection.
Downloaded from www.Manualslib.com manuals search engine