Digital Photo Frame User's Guide Version: PAN.
Table of Contents Table of Contents ...........................….........................................................…….................................. 2 Important Safety Precautions...........……………………………….....................……..............................3 Cleaning the LCD Screen ...........................................................................….………………..…3 Cleaning the Digital Photo Frame..................................................................….……….………..3 Introduction...........
Important Safety Precautions Always follow these basic safety precautions when using your Digital Photo Frame. This will reduce the risk of fire, electric shock, and injury. Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. Warning: To prevent the risk of electric shock, do not remove the cover. There are no user-serviceable parts inside. Refer all servicing to qualified personnel. • The Digital Photo Frame is for indoor use only.
Introduction Welcome to the Pandigital Multimedia Photo Frame! Now you can display your digital photos directly from your memory card, no computer is necessary. Simply insert a memory card into the Digital Photo Frame, and turn on the power. You'll be treated to a slideshow of your photos. It's as easy as that. You can also display individual photos, play video clips, and play background music with your slide show.
What's In the Box Digital Photo Frame AC Power Adapter (9v, 2A) This User's Guide Remote Control USB Cable Decorative Frame Quick Start Guide Warranty Card Quick Start Guide This section describes the easy steps needed to display your first Slide Show. Setting Up the Digital Photo Frame The Digital Photo Frame is easy to set up. Just follow these steps: 1. Plug the AC Power Adapter into the Digital Photo Frame into a wall outlet. 2. Insert a memory card into the appropriate slot.
Note: The card will only fit in one direction; do not force it. The card should fit snugly when properly inserted. Turn the Power Switch on the back of the Digital Photo Frame ON. The Digital Photo Frame will automatically start a slide show of the photos on the card. 4. To display photos individually, press the Exit button to open the Thumbnails Screen. Use the Up and Down arrows to choose a photo.
Use the Remote Control The remote control included with your digital photo frame may look slightly different from the one shown here, but it includes all of the same buttons, and functions in the same way. Install and Replace the Remote Control Battery 1. Hold the Remote Control with the control buttons facing downward. 2. While pressing down on the ridged area of the battery cover, pull the tray out. 3. Place a "CR2025" Lithium battery on the tray with the positive "+" end facing toward you. 4.
Setting Up the Slideshow You can control all of the Digital Photo Frame functions with the buttons on the top of the frame or with the remote control. To display the setup screen, simply hold down the Exit button for a second, or press the Setup button on the remote control. Card Selection Screen Use the Card Selection menu to choose between memory cards and the build-in memory. 1.
Mode Selection Screen The Mode Selection Screen shows after you choose the memory source. Use it to choose the type of files you wish to display. PHOTO MUSIC VIDEO FILE 4. 5. Display JPEG still photo slide shows. Play MP3 audio files. Show motion JPEG AVI movies. View the file structure on the memory card. Press the Left and Right arrows on the Remote Control or the Digital Photo Frame to select the desired memory card. Press Enter to make the selection. If you selected PHOTO, the Thumbnail Screen opens.
Display a Single Photo on the Full Screen You can choose a single photo to display, without a Slide show. 1. With the Thumbnails screen displayed, press Enter to display the selected photo on the full screen. 2. Press the Left Arrow to return to the previous photo. 3. Press the Right Arrow to display the next photo. 4. To stop the display and return to the Thumbnail screen, press the Exit button.
Copy the Displayed Photo to the Built-In Memory Use the Remote control to copy the displayed photo from the memory card to the built-in memory. 1. Press the Setup button. A setup menu opens. 2. Press the Up or Down arrow to select Copy Photo. 3. Press Enter. A confirmation message is displayed. 4. Press Exit to close the menu. Delete the Displayed Photo Use the Remote control to a photo from the built-in memory. 1. Press the Setup button. A setup menu opens. 2.
Listening to MP3 Music If there are MP3 files on a memory card or in the built-in memory, you can play them on the Digital Photo Frame. 1. Use the Remote Control to open the Select Mode screen (described above) and select Music. A new screen opens listing all of the music files on the selected card. 2. Use the left and right arrows to choose a file. 3. Press the Enter button to play the file. 4. To stop the music and return to the Music screen, press the Exit button.
To watch a video, there need to be video files on the memory card. 1. Insert a memory card with video files on it. The Card Selection Screen opens. Choose the desired card. 2. Press Enter. The Mode Selection screen opens. 3. Use the Arrow keys to choose Video and press Enter. A screen listing all of the video files opens. 4. Use the Arrow buttons to choose the desired file and press Enter. The Digital Photo Frame plays the video. 5. Adjust the volume by using VOL+/VOL buttons on the Remote Control. 6.
Display Option Display Image Size Slide Show Transition Slide Show Speed Slide Show Music Slide Show Shuffle Settings Description The Digital Photo Frame can Original/Optimal optimize your photos to display on the screen. Normal Random Special effects shown to Fade transition from one photo to the Curtain next in a Slide Show. Open_Door Cross_Comb Fast Determines how quickly the next Medium photo is displayed. Slow On/Off The selected music file will repeat continuously, or play once.
Advanced Operations In addition to the basic functions described previously, you can connect the Digital Photo Frame to your computer to copy files to the built-in memory. Connect to a Windows Computer To copy files from between your computer and the Digital Photo Frame do the following: 1. Plug in and turn on the Digital Photo Frame. 2. Connect the small end of the USB cable to the USB port on the side of the Digital Photo Frame. 3. Connect the Larger end of the USB cable to a USB port on your computer.
7. To copy files from the card, simply select them and drag them to the desired location on your computer. 8. To copy photos from your computer to the card; first locate the files on your computer. Most cameras and graphic programs store photos in the Windows My Pictures folder. If you didn't move them somewhere else, they are probably there. 9. Select the files you wish to copy, choose File, Copy, and then move your cursor back to the open window for the removable card. 10.
Frequently Asked Questions Q: How do I set up my Digital Photo Frame? A: It is very simple to get your Digital Photo Frame out of the box and running in just a few minutes. Just plug the power adapter into the Digital Photo Frame and into a standard Wall Socket. Insert a memory card into the appropriate card slot on the side of the Digital Photo Frame, and turn it on. Your first slide show will automatically start to play.
Limited Warranty The limited warranty set forth below is given by Pandigital with respect to Pandigital brand electronics products purchased and used in the United States of America. Pandigital warrants this product against defects in material or workmanship as follows: LABOR: For a period of ninety (90) days from the date of purchase, if this product is found to be defective, Pandigital will repair or replace the product, at its option, at no charge.
Technical Specifications
Limited Warranty The limited warranty set forth below is given by Pandigital with respect to Pandigital brand electronics products purchased and used in the United States of America. Pandigital warrants this product against defects in material or workmanship as follows: LABOR: For a period of ninety (90) days from the date of purchase, if this product is found to be defective, Pandigital will repair or replace the product, at its option, at no charge.
