User Manual

System disarmed
System armed
(no alarm events)
Ignition ON Ignition OFF
(briefly)
Lock doors without
arming
Arming with sound
confirmation
Search mode - Flashing
hazzard lights with
sound signals for 5 sec
(1 sec)
Arming without sound
confirmation
Search mode - Flashing
hazzard lights without
sound signals for 5 sec
(2 sec)
Hold-On ignition
mode ON
(3 sec)
Program neutral
mode ON
Remote engine start
QUICK ACCESS FUNCTIONS OF THE REMOTE CONTROL
(briefly)
Unlock doors Unlock doors Disarming with
sound confirmation
(1 sec)
Disarming without
sound confirmation
(2 sec)
(3 sec)
Hold-On ignition
mode OFF
Service mode ON/OFF
Switch OFF the ignition
during remote/automatic
engine start, turbo timer
(briefly)
Switch on the LCD display
(1 sec)
Unlock trunk
(2 sec)
Switch ON an engine heater*
Switch ON/OFF a time channel
(3 sec)
Switch ON/OFF the remote control
+
(briefly)
PANIC mode
+
(briefly)
Arming when ignition
is ON with sound
confirmation
Arming in 30 sec with
sound confirmation
+
(1 sec)
Arming when ignition
is ON without sound
confirmation
Arming in 30 sec
without sound
confirmation
12 48
12 0B
P
22°
90°
55
-18°С
connected
security mode
disarmed/armed
current time
battery charge level
engine temperature
interior temperature
outside temperature
voltage of the car battery
fuel level
shock sensor (Warning
level)
shock sensor (Alarm level)
additional sensor
(Warning level)
additional sensor (Alarm level) /
Status of the original alarm
system
security zone
Tilt sensor
security zone
Motion sensor
security zone Ignition ON
security zone Doors
security zone Hood
security zone Trunk
security zone Low voltage
security zone Brake pedal
Engine running icon
* To control an engine heater, it is required to make setting in Time channels: “Select channel” - for analog control, “Action 1” - “Switch on engine preheater”
F
micro-USB
OLED
SEND/ALARM
indicator
Antenna
(BT 5.0)
The remote control is designed to control and monitor a state of a security
system at a distance of a Bluetooth-connection.
ATTENTION! Enable "Use D-030 as a radio tag" option to use remote control as an owner
authorization device.
- OLED-display
- Three control buttons
- Built-in sound indicator (16 melodies for sound notifications)
- Built-in vibration indicator
- Built-in LED indicator “ALARM/SEND”
- 2.4 GHz radio interface (Bluetooth 5.0 protocol)
- Built-in battery
- Built-in micro-USB port
OPERATING RANGE: from -10
o
C to +40
o
C
DEGREE OF PROTECTION: IP40
COMPATIBILITY
Pandora ELITE v.2, Smart Pro v.3, Camper Mini, Camper Pro v.2, Mini v.3
TURNING ON/OFF THE REMOTE CONTROL
Press and hold button for 3 seconds to turn ON/OFF the remote control
REMOTE CONTROL LED SIGNALS MEANING
CHARGING THE REMOTE CONTROL
There is a battery charge level icon on the display of the remote
control. It is recommended to charge the remote control if only the last
segment of the icon is shown . Charge the built-in battery with a
standard micro-USB cable.
FIRMWARE UPDATE
• Download the mobile application Pandora BT (Android/iOS) or Pandora
Specialist (Android) to the smartphone or a tablet equipped with Bluetooth
4.0 or higher.
• Press and hold the button, connect a USB-cable to the remote control,
release the button after connection.
• Open the mobile applictation, go to the “Search device“ menu, select a
found device and choose one of update options: FILE MANAGER (only for
Andriod devices) or INTERNET.
F
Red indicator «ALARM»
Flashes frequently if there are
any notifications
Flashes occasionally when there is
no connection
Green indicator
«SEND»
Flashes if there is a connection
with the base unit
Goes dark when there is no
connection with the base unit
F
D035
REMOTE CONTROL | TAG