Information

ELECTRICAL SOLUTIONS
B1.102
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
ASTM D 635
Samples of a material, with dimensions 125mm by 12.5mm and the thickness of the intended end use product,
are tested in an unaged “as manufactured” state. A precisely controlled flame is applied to the specimen and a
stopwatch is started. The flame is applied for 30 seconds. The stopwatch is stopped when burning or glowing
combustion ceases or when the flame has proceeded to a mark 100mm from the free end. Ten specimens are
tested. If any of the specimens burn to the 100mm mark, an additional ten specimens are tested.
Burning Rate
• If two or more specimens have burned to the 100mm mark then Average Burning Rate (cm/min.) shall
be reported as the average of the burning rates of all specimens which have burned to the 100mm mark
Table B – Flammability Ratings
■
TEFZEL is a registered trademark of E.I. du Pont de Nemours and Company.
▲
HALAR is a registered trademark of Ausimont USA, Inc.
AEB, mm =
[10(mm) – unburned length(mm)]
N = Number of specimens tested
Rounded to the nearest 5mm
N = Number of specimens tested
Rounded to the nearest 5 seconds
Flammability (continued)
N
0
N
ATB, s =
[time(sec) – 30(sec)]
N
ΣΣ
N
0
ΣΣ
*UL Recognized cable ties meet stated ratings. **UL Recognized -0 parts
Average Time of Burning and Average Extent of Burning
• Average time of burning and average extent of burning of the sample shall be reported if none of the
ten samples or no more than one of the twenty specimens have burned to the 100mm mark
• Average Time of Burning (ATB): • Average Extent of Burning (AEB):
UL 94
94V-2 @ .71mm
94V-2 @ .71mm
94V-2** @ .71mm
94V-2 @ .71mm
94V-2 @ .71mm
94V-2 @ .71mm
94V-0 @ .81mm
94V-0 @ .81mm
94V-0 @ 1.5mm
94 HB @ .71mm
94 HB @ 1.6mm
94 HB @ .94mm
94 HB @ .94mm
94V-0 @ 1.5mm
94V-0 @ .18mm
94 HB @ 1.5mm
Materials
Nylon 6.6, Natural
Weather Resistant Nylon 6.6, Black
(Meets Mil. Spec.)
Weather Resistant Nylon 6.6, Black*
Heat Stabilized Nylon 6.6, Black
Heat Stabilized Nylon 6.6, Natural
Heat Stabilized Weather Resistant
Nylon 6.6, Black
Flame Retardant Nylon 6.6, Black
Flame Retardant Nylon 6.6,
Natural (Ivory)
PEEK, Polyetheretherketone,
Translucent Brown
Metal Detectable Nylon 6.6, Blue
Weather Resistant Nylon 12, Black
Polypropylene, Green
Weather Resistant Polypropylene, Black
TEFZEL
■
, Aqua Blue
HALAR
▲
, Maroon
Weather Resistant Acetal, Black
ASTM D 635
AEB = 20mm
ATB = 5 seconds
AEB = 20mm
ATB = 5 seconds
AEB = 20mm
ATB = 5 seconds
AEB = 20mm
ATB = 5 seconds
AEB = 20mm
ATB = 5 seconds
AEB = 20mm
ATB = 5 seconds
AEB = 15mm
ATB = < 5 seconds
AEB = 15mm
ATB = < 5 seconds
—
AEB = 20mm
ATB = 5 seconds
Avg. Burning Rate
1.6cm/min.
Avg. Burning Rate
2cm/min.
Avg. Burning Rate
2cm/min.
AEB = 15mm
ATB = < 5 seconds
AEB = 15mm
ATB = < 5 seconds
Avg. Burning Rate
2.8cm/min
Part Number
Suffix
None
00
0
30
39
300
60
69
71
86
120
109
100
76
702Y
DT Prefix