Information

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
ELECTRICAL SOLUTIONS
B2.9
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Epoxy Applied Mounts
• Provide a fast, strong, economical method to secure wire/cable
to most surfaces
• Eliminate the need to drill holes
‡Cable tie cross section sizes: M = Miniature, I = Intermediate, and S = Standard.
Epoxy Applied Swivel Mount
• Swivels 360° to assure proper orientation with harness
• Four inspection holes to check adhesive coverage
• For indoor use only
.98
(24.9)
.98
(24.9)
.26
(6.6)
1.13
(28.6)
1.13
(28.6)
.50
(12.7)
.75
(19.0)
.35
(8.9)
‡Cable tie cross section sizes: M = Miniature, I = Intermediate, S = Standard, SGM = Super-Grip
®
Miniature,
and SGI = Super-Grip
®
Intermediate.
Epoxy Applied Cable Tie Mount Kits
• EMA Epoxy supplied in convenient two-compartment mixer cup
with a mixer stick for each cup
• Each cup contains adhesive for three EMS or ASMS mounts
• Epoxy hardens in approximately five minutes
• After full 24 hour cure time, bonding strength will exceed 50 lbs.
on a clean, grease-free surface
• Not recommended for use on polyethylene and
polypropylene surfaces
‡Cable tie cross section sizes: M = Miniature, I = Intermediate, and S = Standard.
Part Number
Used with
Cable Ties‡ Environment
Epoxy
Cups
Mixer
Sticks
EMS
Mounts
Cable
Ties
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Epoxy Adhesive Only
EMA-X — Indoors/Outdoors 10 10 — — 10 —
Epoxy Mounting Kit with EMS Mounts
EMSK3-1-X0 M, I, S Indoors/Outdoors 1 1 3 — 10 —
Epoxy Mounting Kit with EMS Mounts and Cable Ties
EMSK3-1-3-0
M, I, S
Indoors/Outdoors 1 1 3 3 1 10
EMSK12-4-12-X0 Indoors/Outdoors 4 4 12 12 10 10
Part Number
Used with
Cable Ties‡
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
ASMS-A-X M, I, S, SGM, SGI EMA Epoxy 10 100
Part Number
Used with
Cable Ties‡ Material Color Environment
Mounting
Method
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
EMS-A-C
M, I, S
Nylon 6.6 Natural Indoors
EMA epoxy 100 1000
EMS-A-C0 Weather Resistant
Nylon 6.6
Black Outdoors