Information

ELECTRICAL SOLUTIONS
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
B3.22
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
The Panduit Method Reduces Installation Time
1) Place strap
around the
material, insert
tail of strap
through buckle.
Pull strapping
tight and bend up
to hold in place.
Insert tail of
strapping into tool
nose section.
Squeeze handle
to tension.
2) Once proper
tension is
reached,
maintain tension
and raise tool
90°–120°over
buckle and pull
down on cutter
lever, cutting
strap.
3) Remove tool,
press cut end
down and toward
retaining tab.
4) Using the
closure lever
on the handle
of the tool,
bend retaining
tab down and
over cut end.
Part Number System for Discrete Length Strapping
MS 4 W 38 T 15 L 4
MS = Metal Strap
MSC = Metal Strap
Coated
38 = 3/8
50 = 1/2
63 = 5/8
75 = 3/4
L = 50 Pcs.
Q = 25 Pcs.
2 = 201 SS
4 = 304 SS
6 = 316 SS
Bundle
Diameter
(In.)
Width
Inches
Type
Thickness
MaterialStandard
Package Size
15 = 0.015"
30 = 0.030"
Pan-Steel
®
Stainless Steel MS75 Strapping
1) Place strap
around the
material, insert
tail of strap
through buckle.
Pull strapping
tight and bend
up to hold in
place.
2) Insert tail of
strapping into tool
nose section.
Rotate handle
to tension.
3) After tensioning
raise tool 90° –
120° over buckle
and pull down on
cutter lever,
cutting strap.
4) Remove tool,
press cut end
down toward
retaining tab.
5) Using flathead
screwdriver, bend
retaining tab down
and over cut end.
Provides finished,
safe, and
secure closure.
Pan-Steel
®
Stainless Steel Strapping
Provides finished,
safe, and
secure closure.