Information

ELECTRICAL SOLUTIONS
C1.29
Panduct
®
Type F, HN and MC Duct Wire Retainers/Labeling Device
• Used to contain wiring when cover is removed and can also be
used as a labeling device
• FWR-C is compatible with type F and HN duct sizes
• FMWR-C is compatible with type MC duct sizes
• Material: Lead-free PVC
Labeling Inside Duct –
Snaps onto duct fingers. Full
length for use with 4" wide
duct. For smaller widths, break
off segments at scorelines.
Labeling Outside Duct –
Break off the last segment from wire retainer below
1.5" mark and snap onto the back of the remaining
segment. Install label and mount between fingers
facing outward.
Panduct
®
Duct Corner Strip with 1" Bend Radius Control
• Create a strong rigid corner at wiring duct junctions
• Provide bend radius protection for cabling as required in
NFPA 79-2007 section 13.1.5.9 and TIA/EIA-568-B and 569-A
• Available in 6 foot lengths that can be cut to size to meet any
size requirement
• Easy to install two-piece design
• Compatible with all styles of Panduit wiring duct
• UL 94 flammability rating of V-0
• Material: Lead-free PVC
Order number of feet required, in multiples of 6' or Standard Package Quantity.
*Refer to Cutting Guide on page C1.30.
For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Part Number Material
For Duct Width
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.In. mm
FWR-C Rigid PVC 1.50 – 4.00 37.0 – 76.2 100 1000
FMWR-C Rigid PVC 1.46 – 3.94 37.0 – 100.0 100 1000
Part Number Part Description
For
Duct Height
Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.In. mm
6' Lengths for use with all Types of PVC Wiring Duct
CSC1LG6 Cut-to-size 6 foot corner strip with
a 1" bend radius.
All sizes
(Cut to
height)*
All sizes
(Cut to
height)*
Light
Gray
6 120