Information

Cat 5e
(.193")
Cat 6
(.236")
Cat 6A
(.310")mmIn.
Std.
Pkg.
Qty.
Max. Cable Capacity
Max. Bundle
Capacity
Part DescriptionPart Number*
Screw-On Beam Clamps
JP75SBC50-L20 J Hook with screw-on beam clamp for use
with flanges up to 1/2" (12.7mm) thick.
0.75 19.0 4 8 12 50
JP131SBC50-L20 1.31 33.3 14 28 40 50
JP2SBC50-L20 2.00 50.8 30 50 70 50
JP4SBC50-X20 4.00 101.6 115 210 280 10
JP75SBC50R-L20
J Hook with screw-on beam clamp for use
with flanges up to 1/2" (12.7mm) thick.
Rotates 360 degrees.
0.75 19.0 4 8 12 50
JP131SBC50R-L20
1.31 33.3 14 28 40 50
JP2SBC50R-L20
2.00 50.8 30 50 70 50
JP4SBC50R-X20 4.00 101.6 115 210 280 10
JP75SBC87-L20 J Hook with screw-on beam clamp for use
with flanges up to 3/4" (19.1mm) thick.
0.75 19.0 4 8 12 50
JP131SBC87-L20 1.31 33.3 14 28 40 50
JP2SBC87-L20 2.00 50.8 30 50 70 50
JP4SBC87-X20 4.00 101.6 115 210 280 10
JP75SBC87R-L20 0.75 19.0 4 8 12 50
JP131SBC87R-L20 1.31 33.3 14 28 40 50
JP2SBC87R-L20 2.00 50.8 30 50 70 50
JP4SBC87R-X20 4.00 101.6 115 210 280 10
Hammer-On Beam Clamps
JP75HBC25R-L20
J Hook with hammer-on beam clamp for
use with flanges 1/8" – 1/4"
(3.2mm – 6.4mm) thick. Rotates
360 degrees.
0.75 19.0 4 8 12 50
JP131HBC25R-L20
1.31 33.3 14 28 40 50
JP2HBC25R-L20
2.00 50.8 30 50 70 50
JP4HBC25R-X20 4.00 101.6 115 210 280 10
JP75HBC50R-L20 J Hook with hammer-on beam clamp for
use with flanges 5/16" – 1/2"
(7.9mm – 12.7mm) thick. Rotates
360 degrees.
0.75 19.0 4 8 12 50
JP131HBC50R-L20 1.31 33.3 14 28 40 50
JP2HBC50R-L20 2.00 50.8 30 50 70 50
JP4HBC50R-X20 4.00 101.6 115 210 280 10
JP75HBC75R-L20 J Hook with hammer-on beam clamp for
use with flanges 9/16" – 3/4"
(14.3mm – 19.1mm) thick. Rotates
360 degrees.
0.75 19.0 4 8 12 50
JP131HBC75R-L20 1.31 33.3 14 28 40 50
JP2HBC75R-L20 2.00 50.8 30 50 70 50
JP4HBC75R-X20 4.0 101.6 115 210 280 10
For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
ELECTRICAL SOLUTIONS
C4.5
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
JP2SBC50-L20
JP2SBC50R-L20
JP2SBC87-L20
JP2SBC87R-L20
JP2HBC25R-L20
JP2HBC50R-L20
JP2HBC75R-L20
*Suitable for use in air handling spaces in accordance with Sec. 300-22(c) and (d) of the National Electrical Code. JP4 family of parts
suitable for use in single unit configurations. Listed in accordance with CAN/ULC S102.2 when mounted as single units or in pairs.
Minimum spacing of 4' (1220mm) required between mount points. (Flame spread rating = 0, Smoke developed classification = 30)
J-Pro
™
Cable Support System (continued)
Table continues on page C4.6