Information
For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
ELECTRICAL SOLUTIONS
D1.75
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Insulated Ferrules – Twin Wire DIN End Sleeve
• Meets DIN standards for twin wire containment
• Polypropylene insulation housing conforms to DIN color requirements
• Funnel entry for faster insertion and lower installed cost
• Designed with a seamless barrel to contain loose wire strands for
superior terminations
• Eases insertion of wire into terminal block
• Suitable for limited space panel applications
• Multiple pin lengths available for a variety of terminal blocks
For crimping tool information, see page D1.85.
Type FTD
ID
L
P
Max.
Wire
Insul.
Dia.
Insulated Ferrules on Strips – Single Wire
• Polypropylene insulation housing available in DIN standard colors
in strips of 50
• Continuously molded design provides consistent placement of
ferrules in tool to ensure fast, reliable terminations
• Available in #20 – 14 AWG featuring a seamless barrel design
to contain loose wire strands for superior terminations
• Designed for use with the Semiautomatic Ferrule Crimping Tool
CT-1000 for medium volume applications
For crimping tool information, see page D1.86.
Type FS
ID
L
P
Max.
Wire
Insul.
Dia.
Part Number
Wire Size
Color
Max.
Wire
Insul. Dia.
Figure Dimensions
Wire
Strip
Length
Recommended
Installation
Tool
Std.
Pkg.
Qty.
L P ID
AWG mm
²
In. mm In. mm In. mm In. mm In. mm
FTD75-8-D
22 AWG 0.5 White 0.87 2.2 0.59 15.0 0.31 8.0 0.06 1.5 7/16 11.2
CT-1002,
CT-1003,
CT-1123
500
FTD76-8-D
20 AWG 0.75 Gray
0.09 2.4 0.59 15.0 0.31 8.0 0.07 1.8 7/16 11.2 500
FTD76-10-D
0.09 2.4 0.67 17.0 0.39 10.0 0.07 1.8 9/16 14.0 500
FTD77-8-D
18 AWG 1.0 Red
0.11 2.7 0.59 15.0 0.31 8.0 0.08 2.1 7/16 11.2 500
FTD77-10-D
0.11 2.7 0.67 17.0 0.39 10.0 0.08 2.1 9/16 14.0 500
FTD78-8-D
16 AWG 1.5 Black
0.12 3.0 0.63 16.0 0.31 8.0 0.09 2.3 7/16 11.2 500
FTD78-12-D
0.12 3.0 0.79 20.0 0.47 12.0 0.09 2.3 21/32 16.8 500
FTD80-10-TL
14 AWG 2.5 Blue
0.15 3.7 0.73 18.5 0.39 10.0 0.11 2.9 9/16 14.0 250
FTD80-13-TL
0.15 3.7 0.85 21.5 0.51 13.0 0.11 2.9 23/32 16.2 250
FTD81-12-C
12 AWG
4.0
Gray 0.17 4.3
0.91 23.0 0.47 12.0 0.15 3.8 21/32 16.8 100
FTD82-14-C
10 AWG 6.0 Yellow 0.19 4.8 0.98 25.0 0.55 14.0 0.18 4.6 25/32 19.6
CT-1003,
CT-1004,
CT-1104
100
Part Number
Wire
Size
Color
Max.
Wire
Insul. Dia.
Figure Dimensions
Wire
Strip
Length
Recommended
Installation
Tool
Std.
Pkg.
Qty.
L P ID
AWG mm2 In. mm In. mm In. mm In. mm In. mm
DIN End Sleeves
FSD75-8-DSL10
20 AWG 0.50 White 0.10 2.6 0.60 15.2 0.31 8.0 0.04 1.0 13/32 10.0
CT-1000
500
FSD76-8-DSL8
18 AWG
0.75 Gray 0.11 2.7 0.60 15.2 0.31 8.0 0.06 1.5 13/32 10.0 500
FSD77-8-DSL2
1.00 Red 0.12 3.0 0.60 15.2 0.31 8.0 0.07 1.8 13/32 10.0 500
FSD78-8-DSL0
16 AWG 1.50 Black 0.13 3.2 0.60 15.2 0.31 8.0 0.09 2.3 13/32 10.0 500
FSD80-8-DSL6
14 AWG 2.50 Blue 0.16 4.0 0.60 15.2 0.31 8.0 0.09 2.3 13/32 10.0 500
Additional Colored End Sleeves
FS75-8-DSL3
20 AWG 0.50
Orange 0.10 2.6 0.60 15.2 0.31 8.0 0.04 1.0 13/32 10.0
CT-1000
500
FS76-8-DSL10
18 AWG
0.75
White 0.11 2.7 0.60 15.2 0.31 8.0 0.05 1.2 13/32 10.0 500
FS76-8-DSL7
Light Blue 0.11 2.7 0.60 15.2 0.31 8.0 0.05 1.2 13/32 10.0 500
FS77-8-DSL4
1.00
Yellow 0.12 3.0 0.60 15.2 0.31 8.0 0.06 1.5 13/32 10.0 500
FS78-8-DSL2
16 AWG 1.50
Red 0.13 3.2 0.60 15.2 0.31 8.0 0.07 1.8 13/32 10.0 500
FS80-8-DSL8
14 AWG 2.50
Gray 0.16 4.0 0.60 15.2 0.31 8.0 0.09 2.3 13/32 10.0 500