Information

ELECTRICAL SOLUTIONS
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
D1.86
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
• Innovative rapid load design utilizes continuously molded ferrules
to significantly reduce installation time
• Controlled cycle tool cuts, strips, and crimps wire to
maximize efficiency
• Adjustable die setting allows termination of all Panduit
#20 – 14 AWG continuously molded ferrules with a single tool
Part Number Part Description
Std.
Pkg.
Qty.
CT-1000
Controlled cycle crimp tool with trapezoid profile for #20 – 14 AWG (0.50 – 2.5mm
²
)
insulated continuously molded ferrules on strips. Also cuts and strips wire.
1
Controlled Cycle Crimping Tools – In-Line
• Military specialty tools help meet military and nuclear test
requirements for Class 2 applications
• In-line crimp action for greater dielectric strength with uniform
insulation compression
• Calibration-recalibration is possible for maintaining exact
crimp dimensions
For proper crimp head selection, see the tooling selection guide for Panduit terminals, splices, and disconnects on
pages D1.90 – D1.92, in this catalog.
Part Number Part Description
Std.
Pkg.
Qty.
CT-400
Crimps #22 – 14 Panduit insulated terminals, disconnects, and splices. Comes
complete with tools for calibration. Has adjustable pre-load and emergency ratchet.
Helps meet military and nuclear requirements.
1
CT-460
Crimps #16 – 10 Panduit insulated terminals, disconnects, and splices. Has same
features as CT-400 above.
1
Pneumatic Crimping Tool
• Quickly crimps a variety of loose piece terminals in a variety of
wire sizes for medium volume production
• Versatile interchangeable crimping heads let you switch terminal
types quickly to meet changing production requirements; this tool,
when used with only four crimp heads, can crimp a full range of
#26 – 10 AWG insulated and non-insulated terminal products
• Portable – the small size, ease of bench mounting and quick
pneumatic connection allow the tool to be moved from one work
station to another or to the work itself
For proper crimp head selection, see the tooling selection guide for Panduit terminals, splices, and disconnects on
pages D1.90 – D1.92, in this catalog.
Part Number Part Description
Std.
Pkg.
Qty.
CT-600-A
Pneumatic tool, 6' air hose and carrying case. Does not include crimping heads
(ordered separately).
1
CT-500CH
Crimping head for most #22 – 14 insulated terminals, splices, and disconnects. 1
CT-520CH
Crimping head for most #22 – 14 insulated butted seam disconnects and #26 – 22
insulated terminals.
1
CT-550CH
Crimping head for most #22 – 10 insulated terminals and splices. 1
CT-570CH
Crimping head for #22 – 10 non-insulated terminals, splices, and disconnects. 1
PD-600-A
Positioning device (for bench mounting of CT-600-A). 1
FPC-600-A
Foot actuator operating air pressure: 80 – 100 psi .233 SCFM type of air: lubricated.
Recommend using Norgren (Brand) #FLR222-012-043008 filter lubricator regulator.
1
K600-A
Update kit for foot pedal control and positioning device to work with new CT-600-A
pneumatic crimping tool.
1
Semiautomatic Ferrule Crimping Tool CT-1000