Information

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
ELECTRICAL SOLUTIONS
E2.5
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Laser/Ink Jet Flag Style Labels
Part Number System for Component Labels
Laser/Ink Jet Component Labels
• Labels can be printed in both laser and ink jet printers
• Use for identifying patch panels, faceplates, punchdown blocks
and other network systems hardware
• Die-cut labels designed to provide maximum aesthetic quality
and appearance
• Available in adhesive polyolefin and non-adhesive
polyester materials
Order number of labels required in multiples of Std. Pkg. Qty.
C = Component Label
Print Method
J = Laser/Ink JetFJ = Polyolefin
YJ = White Polyester
YL = Yellow Polyester
C100X050YJ J
Width
(In.)
Label Type “X”
Height
(In.)
Material
Part Number Part Description
Width Length
Min. Cable
O.D.
Max. Cable
O.D.
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.In. mm In. mm In. mm In. mm
N050X150FJJ White, polyolefin label. .50 12.70 1.50 38.10 .06 1.52 .15 3.81 5000 25000
N100X150FJJ White, polyolefin label. 1.00 25.40 1.50 38.10 .12 3.05 .22 5.58 2500 10000
Material/Print Method Selection Guide
Material Print Method
Temperature
Range
Features
Polyester, White (YJ)
Yellow (YL)
Laser/Ink Jet (J)
-40°F to 311°F
(-40°C to 154°C)
Indoor/outdoor rated; provides durability, high temperature
resistance, and dimensional stability. Does not stretch or
easily tear
Polyolefin, White (FJ) -40°F to 180°F
(-40°C to 82°C)
Indoor/outdoor rated; thin conformable material for
general identification; excellent print quality
Table continues on page E2.6