Manualshelf

Owners manual

ManualsBrandsPANDUIT ManualsComputer AccessoriesPanduit LS8E-KIT Thermal Transfer Printer Kit
31323334353637383940
PANTHERLINK
37
Note: To use the file transfer or firmware upgrade functions on the LS8E printer,
you must first install the corresponding drivers on your computer.
Installing the PanTherLink File Transfer Driver
1. After PanTherLink is installed, connect the USB cable provided in the LS8-
PCKIT to the LS8E printer and to your computer.
2. Power the LS8E printer on.
3. Press the SETUP key.
4. Select PC Interface.
5. Select Files/Printing.
Your computer will notify you that it has found new hardware.
The Found New Hardware Wizard will then begin on your computer.
6. Select No, not this time.
7. Click Next.