Owners manual

LABELING EXERCISES

Exercise 4

Create serialized wire markers with heat shrink tubing

• Step 1: Insert a heat shrink tubing label cassette such as H000X044H1C

• Step 2: When prompted, select New Blank File. Save previous label if

necessary.

• Step 3: Type WIRE

• Step 4: Press INSERT key

• Step 5: Press down arrow key once to highlight Serial

• Step 6: Press

• Step 7: Press right arrow key

• Step 8: Type 1 for Start value

• Step 9: Press

• Step 10: Press right arrow key

• Step 11: Type 3 for End value

• Step 12: Press

twice

• Step 13: Press PRINT

Results:

Hint: The Serial tool allows numeric or alphabetic serializations.

You can choose any increment from 1 to 99, print multiple

copies of a series, and even collate the copies of the series

items.

Heat shrink tubing can be partially cut to create a strand of

individual markers. The Cut/Pause function in the Setup

Menu will pause a print job between each consecutive label

for cutting. The print job will automatically restart after

cuttin

IRE1

WIRE1

IRE2

WIRE2

IRE3

WIRE3