Information

ManualsBrandsPANDUIT ManualsCable TiesEcru 1 pc(s)

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)

ELECTRICAL SOLUTIONS

B2.

Cable

Accessories

C1.

Wiring

Duct

C3.

Abrasion

Protection

C4.

Cable

Management

D1.

Terminals

D2.

Power

Connectors

E1.

Labeling

Systems

E2.

Labels

E3.

Pre-Printed

& Write-On

Markers

Index

B3.

Stainless

Steel Ties

C2.

Surface

Raceway

E5.

Lockout/

Tagout

& Safety

Solutions

B1.

Cable Ties

System

Overview

D3.

Grounding

Connectors

E4.

Permanent

Identification

F. Part Number Index

E. Identification and Safety Solutions

C. Route/Protect

B. Bundle

1. Cable Ties

2. Cable Accessories

3. Stainless Steel Cable Ties and Accessories

1. Wiring Duct

2. Surface Raceway

3. Abrasion Protection

4. Cable Management

D. Terminate

1. Terminals

2. Power Connectors

3. Grounding Connectors

1. Labeling Systems

2. Labels

3. Pre-Printed and Write-On Markers

4. Permanent Identification

5. Lockout/Tagout and Safety Solutions

A. System Overview

Section Index

CLICK on any of

the tabs on this

page to jump to

that location

within the catalog

Click on the logo above to go to

www.panduit.com

up to date product information

find a local distributor

technical information

Summary of content (1023 pages)

PAGE 1
ELECTRICAL SOLUTIONS A. System Overview Click on the logo above to go to www.panduit.com up to date product information find a local distributor technical information Section Index B1. Cable Ties A. System Overview B2. Cable Accessories B. Bundle B3. Stainless Steel Ties 1. Cable Ties C1. Wiring Duct 2. Cable Accessories 3. Stainless Steel Cable Ties and Accessories C2. Surface Raceway C. Route/Protect 1. Wiring Duct C3. Abrasion Protection 2. Surface Raceway 3. Abrasion Protection 4.
PAGE 2
ELECTRICAL SOLUTIONS A. System Overview Table of Contents System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A1.1 Solutions Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A1.2 – A1.
PAGE 3
ELECTRICAL SOLUTIONS Table of Contents Dome-Top ® Barb Ty Clamp Ties – Weather Resistant and Heat Stabilized Nylon 6.6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .B1.49 Dome-Top ® Barb Ty Wing Push Mount Ties – Nylon and Weather Resistant Nylon 6.6 . . . . . . . . . . . . . . . . . . . . . . . . . .B1.50 Dome-Top ® Barb Ty Push Mount Ties – Weather Resistant Nylon 6.6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B1.51 Permanent Marking Pens . . . . . . . . . . . .
PAGE 4
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Table of Contents Cushion Sleeve Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B1.114 Automatic Cable Tie Installation Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B1.
PAGE 5
ELECTRICAL SOLUTIONS A. System Overview Table of Contents Adhesive Backed Cord Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B2.31 Push Mount Cord Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B2.31 “J” Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 6
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions Table of Contents ★ PBTMT Battery Powered Installation Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 7
ELECTRICAL SOLUTIONS Table of Contents Panduct ® Snap-Clip Mounting Bracket – Type NE Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C1.31 Adhesive Tape for Wiring Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C1.32 Specifications for Factory Applied Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 8
ELECTRICAL SOLUTIONS A. System Overview Table of Contents Pan-Way ® Snap-On Faceplates and Surface Mount Outlet Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C2.33 Pan-Way ® Fast-Snap ™ Surface Mount Outlet Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C2.34 Pan-Way ® Classic Series Snap-On Faceplates for Use with Panduit ® Mini-Com ® Modules . . . . . . . . . . . . . . . . . . . . . . .C2.
PAGE 9
ELECTRICAL SOLUTIONS Table of Contents Abrasion Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C3.1 Pan-Wrap ™ Split Harness Wrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C3.2 Pan-Wrap ™ Installation Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 10
ELECTRICAL SOLUTIONS A. System Overview Table of Contents Flat Pan-Post ™ Standoffs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C4.14 Communication Cable Management Kit for Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C4.14 B1. Cable Ties Terminals B2. Cable Accessories Pan-Term Terminals . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 11
ELECTRICAL SOLUTIONS Table of Contents DiscoGrip ™ Female Disconnect, Premium Nylon Fully Insulated – Funnel Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D1.46 Heat Shrink Disconnects, Fully Insulated – Funnel Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D1.47 Female Disconnect, Nylon Barrel Insulated – Funnel Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D1.
PAGE 12
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index Table of Contents CT-2500 Battery Powered Crimping Tool . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 13
ELECTRICAL SOLUTIONS Table of Contents Metric DiscoGrip ™ Male Disconnects, Fully Insulated – Funnel Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D1.136 Metric Disco ™ Male Disconnects, Nylon Fully Insulated – Funnel Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D1.136 Metric Disco ™ Male Disconnects, Nylon Fully Insulated – Expanded Wire Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D1.
PAGE 14
ELECTRICAL SOLUTIONS A. System Overview Table of Contents Flex Conductor, One-Hole, Standard Barrel with Window Lug, 45° Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D2.68 – D2.69 Flex Conductor, One-Hole, Standard Barrel with Window Lug, 90° Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D2.70 – D2.71 Flex Conductor, One-Hole, Standard Barrel with Window, Narrow Tongue Lug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D2.
PAGE 15
ELECTRICAL SOLUTIONS Table of Contents One-Hole, Vertical Two-Barrel Lug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D2.143 Two-Hole, Two-Barrel Lug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D2.143 Two-Hole, Vertical Two-Barrel Lug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 16
ELECTRICAL SOLUTIONS A. System Overview Table of Contents Die Type, Manual, Crimping Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D3.37 CD-720 Crimping Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D3.37 Die Type, Manual, Crimping Tool and Die Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 17
ELECTRICAL SOLUTIONS Table of Contents Easy-Mark ™ Labeling Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E1.16 CAD-Connect ™ Labeling Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E1.16 A. System Overview B1. Cable Ties Labels Labels: Laser, Ink Jet, and Thermal Transfer . . . . . . . . . . . . . . . . . . . .
PAGE 18
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index Table of Contents Pneumatic Energy Lockout Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 19
ELECTRICAL SOLUTIONS A. System Overview NOTES B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F.
PAGE 20
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F.
PAGE 21
ELECTRICAL SOLUTIONS A. System Overview SYSTEM OVERVIEW Panduit is a global leader in comprehensive physical infrastructure solutions.Issues such as convergence, interoperability, scalability and continuity need to be addressed to reduce risk across the IT, facilities, and manufacturing physical infrastructure.
PAGE 22
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties SOLUTIONS OVERVIEW Panduit provides innovative solutions that offer maximum reliability at the lowest installed cost from the factory and manufacturing floor, to automation and control, to the office area. B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3.
PAGE 23
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels OEM Transportation Utilities E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S.
PAGE 24
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties CONTROL PANEL SOLUTIONS Panduit delivers innovative solutions that support evolving technologies in automation and control. Control panel solutions from Panduit reduce design and assembly time,save valuable panel space,ease installation and maintenance,and improve manageability and reliability,all contributing to lower cost of ownership. B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3.
PAGE 25
ELECTRICAL SOLUTIONS A. System Overview HARNESS SOLUTIONS Panduit is a leading supplier of wire management solutions,helping OEM and CMs achieve their strategic objectives.From complete system solutions that provide the lowest installed cost to new product innovations that meet evolving application challenges,Panduit solutions meet a wide range of applications, volumes, and environments in white goods, gaming, vending, and transportation. B1. Cable Ties B2. Cable Accessories 3 B3.
PAGE 26
ELECTRICAL SOLUTIONS A. System Overview CONTRACTOR SOLUTIONS B1. Cable Ties Panduit is committed to delivering innovative solutions that meet the needs of electrical and networking installations. Contractors rely on Panduit solutions for improved productivity, reliability, and safety with lower installed costs. A comprehensive range of products and tooling satisfies the most demanding applications and environments. Contractor programs further support your business needs and benefit the bottom line. B2.
PAGE 27
ELECTRICAL SOLUTIONS A. System Overview UNIFIED PHYSICAL INFRASTRUCTURE APPROACH SM The physical infrastructure is the basic foundation on which enterprise systems run, including voice and data communications, power, computing, control, and security systems.The need to provide real-time information, manage applications, and control functional systems through IP networking is also driving increased interdependence between these systems through several core enterprise areas.
PAGE 28
ELECTRICAL SOLUTIONS A. System Overview APPLICATION STANDARDS B1. Cable Ties To help assure optimum quality, Panduit products are designed and manufactured to meet applicable environmental, safety, market industry and customer standards. B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4.
PAGE 29
ELECTRICAL SOLUTIONS A. System Overview APPLICATION STANDARDS (continued) B1. Cable Ties Alliance for Telecommunications Industry Solutions (ATIS) ATIS is a technical planning and standards development organization that is committed to rapidly developing and promoting technical and operations standards for the communications and related information technologies industry worldwide using a pragmatic, flexible, and open approach.
PAGE 30
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway PROGRAMS Panduit maintains a dedicated global sales force of highly qualified industry experts to provide professional, consultative sales guidance. In addition, Panduit has partnered with best-in-class contractors and distributors to provide the services and support to deliver comprehensive, reliable solutions at the lowest installed cost.
PAGE 31
ELECTRICAL SOLUTIONS A. System Overview CABLE TIES Panduit offers the most complete selection of cable tie styles, sizes, materials and colors to meet our customers’ needs. Panduit cable ties bundle, mount, and identify in countless indoor, outdoor, and harsh environment applications. Panduit cable ties, wiring accessories, and installation tools allow our customers to achieve the lowest total installed cost of managing wire and cable. B1. Cable Ties B2. Cable Accessories B3.
PAGE 32
ELECTRICAL SOLUTIONS A. System Overview Cable Tie Selection Chart Follow this step-by-step process to find the cable ties that best suit your application: B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 33
ELECTRICAL SOLUTIONS A. System Overview Highest High Acceptable Low Lowest B1. Cable Ties Recommendation Legend B2. Cable Accessories Bundle Bundle, Identify Flame Retardant Nylon 6.6 Flame Retardant Nylon 6.6 Black Natural Ivory Black Green 60 69 120 11,000 11,000 1.1% 1.
PAGE 34
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Cable Tie Styles Overview Pan-Ty ® Cable Ties Pages B1.6 – B1.37 • Designed for use in numerous applications to meet a variety of needs in the OEM, MRO, and construction markets B2. Cable Accessories • Largest selection of styles, materials, and sizes • One-piece construction for consistent performance and reliability B3. Stainless Steel Ties • Lowest threading force of any one-piece cable tie in the industry C1. Wiring Duct C2.
PAGE 35
ELECTRICAL SOLUTIONS A. System Overview Sta-Strap ® Cable Ties Pages B1.65 – B1.72 B1. Cable Ties • Convenient and easy to use in OEM manual assembly operations • Exclusive, two-piece design provides lowest threading force in the industry • Use for normal bundling and through-panel applications • Releasable prior to final tensioning and cut-off B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Network Cable Ties Pages B1.85 – B1.
PAGE 36
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Features and Benefits – Pan-Ty ® Cable Ties One-piece design for consistent performance and reliability. Available in lengths from 2.8 to 43.3 inches and a variety of styles, materials, and colors for specific applications. B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct One-piece locking wedge provides consistent, reliable performance C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1.
PAGE 37
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Pan-Ty Cable Ties ® B1. Cable Ties B2. Cable Accessories ▲ HALAR Material, Color (Suffix) Style/Function Part Number Prefix Catalog Page Nylon 6.6, Natural (No Suffix) Locking Ties/Bundle Releasable Ties/Re-usable Clamp Ties/Mount Push Mount Ties/Mount Marker Ties/Identify PLT PRT PLC PLWP, PRWP, PLUP, PLP PLF, PLM B1.8,9 B1.22 B1.26 B1.28, 30,33 B1.34 Weather Resistant Nylon 6.
PAGE 38
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Ty ® Cable Ties – Nylon 6.6 • For indoor use • Versatile cable ties can be used in countless applications • One-piece construction for consistent performance and reliability • Lowest threading force of any one-piece cable tie in the industry B2.
PAGE 39
ELECTRICAL SOLUTIONS A. System Overview Pan-Ty ® Lashing Ties – Nylon 6.6 • For indoor use • Typically used for heavy duty applications • Strongest Pan-Ty ® Cable Tie available • Can be used with MCEH mounting clip, see page B1.24 B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Part Number Length In. mm Width In. mm Thickness In. mm Max. Bundle Dia. In. mm Min. Loop Tensile Str. Lbs. N Recommended Installation Tool Std. Pkg. Qty. Std. Ctn. Qty.
PAGE 40
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Ty ® Cable Ties – Weather Resistant Nylon 6.6 • Greater resistance to damage caused by ultraviolet light – indoor or outdoor use • Versatile cable ties can be used in countless applications • One-piece construction for consistent performance and reliability • Lowest threading force of any one-piece cable tie in the industry • Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation B2.
PAGE 41
ELECTRICAL SOLUTIONS A. System Overview Pan-Ty ® Lashing Ties – Weather Resistant Nylon 6.6 • Greater resistance to damage caused by ultraviolet light – indoor or outdoor use • Typically used for heavy duty applications • Strongest Pan-Ty ® Cable Tie available • Can be used with MCEH mounting clip, shown below B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties No Buckle Design Lashing Tie Part Number C1. Wiring Duct Length In. mm Width In. mm Thickness In. mm Max. Bundle Dia. Min.
PAGE 42
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Ty ® Cable Ties – Heat Stabilized Nylon 6.6 • For high temperature applications up to 239°F (115°C) – indoor use • One-piece construction for consistent performance and reliability • Lowest threading force of any one-piece cable tie in the industry • Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation B2. Cable Accessories B3. Stainless Steel Ties Straight Tip Curved Tip C1.
PAGE 43
ELECTRICAL SOLUTIONS A. System Overview Pan-Ty ® Cable Ties – Heat Stabilized Weather Resistant Nylon 6.6 • Greater resistance to damage caused by ultraviolet light and for high temperature applications up to 212°F (100°C) – indoor or outdoor use • One-piece construction for consistent performance and reliability • Lowest threading force of any one-piece cable tie in the industry • Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation B1.
PAGE 44
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Ty ® Cable Ties – Flame Retardant Nylon 6.6 • Flammability rating of UL 94V-0 – indoor use • One-piece construction for consistent performance and reliability • Lowest threading force of any one-piece cable tie in the industry • Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation B2. Cable Accessories Straight Tip Curved Tip B3. Stainless Steel Ties C1.
PAGE 45
ELECTRICAL SOLUTIONS A.
PAGE 46
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 47
ELECTRICAL SOLUTIONS A.
PAGE 48
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Ty ® Cable Ties – HALAR▲ – Distinctive Maroon Color • UL Listed for use in plenum or air handling spaces per NEC, Section 300-22 (C) and (D) • Low smoke density and excellent flammability rating of UL 94V-0 • Commonly accepted solution for bundling qualified cable without conduit in air handling space applications B2.
PAGE 49
ELECTRICAL SOLUTIONS A.
PAGE 50
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 51
ELECTRICAL SOLUTIONS Pan-Ty ® A. System Overview Cable Ties – Metal Detectable Nylon 6.
PAGE 52
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Ty ® Releasable Cable Ties – Nylon 6.
PAGE 53
ELECTRICAL SOLUTIONS A. System Overview Pan-Ty ® Releasable Cable Ties – Weather Resistant and Heat Stabilized Nylon 6.
PAGE 54
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Pan-Ty ® Releasable Lashing Ties – Weather Resistant and Heat Stabilized Nylon 6.
PAGE 55
ELECTRICAL SOLUTIONS A.
PAGE 56
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Ty ® Clamp Ties – Nylon 6.
PAGE 57
ELECTRICAL SOLUTIONS A. System Overview Pan-Ty ® Clamp Ties – Weather Resistant and Heat Stabilized Nylon 6.
PAGE 58
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Ty ® Wing Push Mount Ties – Nylon 6.6 • • • • For indoor use Cable tie, mount, and fastener in a single part Used to attach bundles to another surface such as a flat panel Anchor is easily pressed into a pre-formed hole and locks in place • Wings provide constant tension for a stable, secure, and rattle-free installation • Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation B2.
PAGE 59
ELECTRICAL SOLUTIONS A. System Overview Pan-Ty ® Wing Push Mount Ties – Weather Resistant and Heat Stabilized Nylon 6.
PAGE 60
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 61
ELECTRICAL SOLUTIONS Pan-Ty ® Center Mounted Wing Push Mount Ties – Heat Stabilized Nylon 6.
PAGE 62
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Pan-Ty ® Ladder Style Releasable Wing Push Mount Ties – Heat Stabilized Nylon 6.
PAGE 63
ELECTRICAL SOLUTIONS A.
PAGE 64
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 65
ELECTRICAL SOLUTIONS A. System Overview Pan-Ty Cable Ties ® B1. Cable Ties Material and Color Chart Panduit Material Color Suffix Nylon 6.6 Weather Resistant Nylon 6.6 Weather Resistant Nylon 6.6 (meets Mil. Spec.) Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Heat Stabilized Nylon 6.
PAGE 66
ELECTRICAL SOLUTIONS A. System Overview Pan-Ty ® Cable Ties (continued) Standard Packaging B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Part Number PL2M2S-L PL3M2S-L PLP1.5I-C PLP2S-C PLT.6SM-C PLT.7M-C PLT1M-C Natural Nylon 6.6 Material/Color Suffix ✓ 0 ✓ ✓ ✓ ✓ ✓ ✓ 0 0,00,1,2,3,4Y,5,6,7,8,10,14,30, 71,76,86,186,702Y C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1.
PAGE 67
ELECTRICAL SOLUTIONS A. System Overview Standard Packaging Part Number PLT2EH-Q Natural Nylon 6.6 Material/Color Suffix 0 PLT5EH-Q ✓ 0 PLT6EH-Q ✓ 0 PLT8EH-Q PLT10EH-Q PLT12EH-Q 0 0 0 PLWP1M-C PLWP1.5I-C PLWP1S-C ✓ ✓ ✓ 0 PLWP2S-C ✓ 0 PRT1S-C PRT1.
PAGE 68
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Super-Grip ® Cable Ties One-piece design with a thin, wide strap body for improved flexibility. B1. Cable Ties Dome shaped head and smooth, round strap body protect the cable insulation B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct One-piece locking wedge provides consistent, reliable performance Strong locking wedge improves strength and allows for rough handling C2. Surface Raceway C3. Abrasion Protection C4.
PAGE 69
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Super-Grip ® Cable Ties B1. Cable Ties B2. Cable Accessories Material, Color (Suffix) Part Number Prefix Style/Function Catalog Page Nylon 6.6, Natural (No Suffix) Locking Ties/Bundle SG B1.40 Weather Resistant Nylon 6.6, Black (0) Locking Ties/Bundle SG B1.41 Heat Stabilized Nylon 6.6, Black (30) Locking Ties/Bundle SG B1.41 B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4.
PAGE 70
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Super-Grip ® Cable Ties – Nylon 6.
PAGE 71
ELECTRICAL SOLUTIONS A. System Overview Super-Grip ® Cable Ties – Weather Resistant and Heat Stabilized Nylon 6.
PAGE 72
ELECTRICAL SOLUTIONS A. System Overview Super-Grip ® Cable Ties and Mounts B1. Cable Ties Material and Color Chart Panduit B2. Cable Accessories B3. Stainless Steel Ties C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index B1.42 Color Nylon 6.6 Weather Resistant Nylon 6.6 Heat Stabilized Nylon 6.
PAGE 73
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Dome-Top ® Barb Ty Cable Ties Two-piece design incorporates a stainless steel locking barb in a nylon cable tie. B1. Cable Ties Dome-top head features unique patented design with round, smooth edges B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Stainless steel locking barb provides infinite adjustability through entire bundle range C2. Surface Raceway C3. Abrasion Protection C4.
PAGE 74
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Dome-Top ® Barb Ty and Dura-Ty ™ Cable Ties B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Material, Color (Suffix) Style/Function Part Number Prefix Nylon 6.6, Natural (No Suffix) Locking Ties/Bundle Clamp Ties/Mount Push Mount Ties/Mount Marker Ties/Identify BT BC BW BF, BM, B2M, B3M, B4M B1.45 B1.48 B1.50 B1.52 Weather Resistant Nylon 6.
PAGE 75
ELECTRICAL SOLUTIONS A. System Overview Dome-Top ® Barb Ty Cable Ties – Nylon 6.
PAGE 76
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Dome-Top ® Barb Ty Cable Ties – Weather Resistant Nylon 6.
PAGE 77
ELECTRICAL SOLUTIONS A. System Overview Dome-Top ® Barb Ty Cable Ties – Heat Stabilized Nylon 6.6 • For high temperature applications up to 239°F (115°C) – indoor use • Dome-top head features unique patented design with round, smooth edges • Stainless steel locking barb provides consistent performance, reliability, and infinite adjustability through entire bundle range • Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation B1. Cable Ties B2.
PAGE 78
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Dome-Top ® Barb Ty Clamp Ties – Nylon 6.
PAGE 79
ELECTRICAL SOLUTIONS A. System Overview Dome-Top ® Barb Ty Clamp Ties – Weather Resistant and Heat Stabilized Nylon 6.
PAGE 80
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Dome-Top ® Barb Ty Wing Push Mount Ties – Nylon and Weather Resistant Nylon 6.
PAGE 81
ELECTRICAL SOLUTIONS A. System Overview Dome-Top ® Barb Ty Push Mount Ties – Weather Resistant Nylon 6.
PAGE 82
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 83
ELECTRICAL SOLUTIONS A. System Overview Dura-Ty ™ Cable Ties – Weather Resistant Acetal – Heavy Cross Section • Black acetal strap and head material provide 20+ years outdoor life and high impact resistance • Excellent ultraviolet light, chemical, and moisture resistance Part Number Strap Length Ft. m Description Strap Width In.
PAGE 84
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Stackable Aerial Cable Spacer – Weather Resistant Polypropylene • Greater resistance to damage caused by ultraviolet light – indoor or outdoor use • Each spacer snaps into another to increase spacer heights by 1/2" increments • Designed for use in parallel or perpendicular applications • For use with Dura-Ty ™ Cable Ties shown on the previous page B2. Cable Accessories B B3. Stainless Steel Ties C C1. Wiring Duct A C2. Surface Raceway C3.
PAGE 85
ELECTRICAL SOLUTIONS A. System Overview Part Number Availability List Standard Packaging Part Number BC2S-S10-C Natural Nylon 6.6 ✓ Material/Color Suffix 0 BC4S-S10-C BC4LH-S25-L BF1M-C BF2M-C BM1M-C BM2M-C BM2S-C BM4S-C ✓ BT1M-C ✓ BT1.5M-C ✓ 0 BT2M-C BT4M-C BT1.
PAGE 86
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Features and Benefits – Parallel-Entry Cable Ties Parallel-entry cable ties limit exposure to sharp edges and protect workers’ arms/hands. The ties are designed with a low profile head to avoid snags and reduce overall bundle size. Contour-Ty ® Cable Ties Hyper-V ™ Cable Ties Fully enclosed head for consistent strength Design provides for an optional threading position that allows releasable, temporary bundling B3.
PAGE 87
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Parallel-Entry Cable Ties B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Material, Color (Suffix) Style/Function Nylon 6.6, Natural (No Suffix) Locking Ties/Bundle CBR B1.58 Weather Resistant Nylon 6.6, Black (0) Locking Ties/Bundle CBR B1.59 Heat Stabilized Nylon 6.6, Black (30) Locking Ties/Bundle CBR B1.60 Heat Stabilized Nylon 6.6, Natural (39) Locking Ties/Bundle CBR B1.60 Flame Retardant Nylon 6.
PAGE 88
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Contour-Ty ® Cable Ties – Nylon 6.
PAGE 89
ELECTRICAL SOLUTIONS A. System Overview Contour-Ty ® Cable Ties – Weather Resistant Nylon 6.
PAGE 90
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Contour-Ty ® Cable Ties – Heat Stabilized and Flame Retardant Nylon 6.
PAGE 91
ELECTRICAL SOLUTIONS Belt-Ty ™ In-Line Cable Ties – Nylon and Weather Resistant Nylon 6.
PAGE 92
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Hyper-V ™ In-Line Cable Ties – Weather Resistant Nylon 6.
PAGE 93
ELECTRICAL SOLUTIONS A. System Overview IN-LINE Cable Ties – Weather Resistant Nylon 6.
PAGE 94
ELECTRICAL SOLUTIONS A. System Overview Parallel-Entry Cable Ties B1. Cable Ties Material and Color Chart B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection Panduit Material Nylon 6.6 Weather Resistant Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Nylon 6.6 Heat Stabilized Nylon 6.6 Heat Stabilized Nylon 6.6 Flame Retardant Nylon 6.
PAGE 95
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Sta-Strap ® Cable Ties Two-piece design incorporates a separate nylon head and strap. B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Free floating head design results in tight bundles and low installed head height C2. Surface Raceway C3. Abrasion Protection C4. Cable Management High loop tensile strength exceeds industry standards Two-piece design results in extremely low thread force D1. Terminals D2.
PAGE 96
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Sta-Strap ® Cable Ties B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Material, Color (Suffix) Style/Function Nylon 6.6, Natural (No Suffix) Locking Ties/Bundle Clamp Ties/Mount Marker Ties/Identify SST SSC SSM B1.67 B1.70 B1.71 Weather Resistant Nylon 6.6, Black (0) Locking Ties/Bundle Clamp Ties/Mount Marker Ties/Identify SST SSC SSM B1.68 B1.70 B1.71 Heat Stabilized Nylon 6.
PAGE 97
ELECTRICAL SOLUTIONS A. System Overview Sta-Strap ® Cable Ties – Nylon 6.6 • For indoor use • Used for normal bundling and through-panel applications • Small head height allows more efficient use of space in compact areas • Exclusive two-piece design offers the lowest threading force in the industry • Average 14% lighter than one-piece cable ties • Releasable prior to final tensioning for bundle modifications B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Length Part Number In.
PAGE 98
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Sta-Strap ® Cable Ties – Weather Resistant Nylon 6.
PAGE 99
ELECTRICAL SOLUTIONS A. System Overview Sta-Strap ® Cable Ties – Heat Stabilized Nylon 6.6 • For high temperature applications up to 239°F (115°C) – indoor use • Used for normal bundling and through-panel applications • Heavy head design is available for use in through-panel applications with a larger opening up to .400" (10.
PAGE 100
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 101
ELECTRICAL SOLUTIONS A. System Overview Sta-Strap ® Marker Ties – Nylon and Weather Resistant Nylon 6.6 • Natural nylon material for indoor use • Weather resistant material has greater resistance to damage caused by ultraviolet light – indoor or outdoor use • Used to fasten and identify bundles at the same time • Unique design allows tie to be used as a wrap-around or flag marker • Can be marked with Panduit Marker Pens on page B1.
PAGE 102
ELECTRICAL SOLUTIONS A. System Overview Sta-Strap ® Cable Ties B1. Cable Ties Material and Color Chart B2. Cable Accessories B3. Stainless Steel Ties Panduit Material Nylon 6.6 Weather Resistant Nylon 6.6 Nylon 6.6 Color Natural Black Red Suffix ✓ 0 2 Panduit Material Nylon 6.6 Heat Stabilized Nylon 6.6 Color Black Black ✓Denotes Panduit Natural Nylon 6.6 (no suffix). C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection Part Number Availability List Standard Packaging C4.
PAGE 103
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Specialty Ties B1. Cable Ties Material, Color (Suffix) Stud Mounted Cable Ties Ladder Style Stud Mount Style/Function Part Number Prefix Heat Stabilized Nylon 6.6, Black (30) Locking Ties/Bundle Releasable/Re-usable PLST PRST B1.74 B1.74 Heat Stabilized Weather Resistant Nylon 6.6, Black (300) Locking/Bundle PLST B1.74 Heat Stabilized Nylon 6.6, Black (30) Releasable/Re-usable PRST Catalog Page B1.75 Weather Resistant Nylon 6.
PAGE 104
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Pan-Ty ® Stud Mounted Cable Ties – Heat Stabilized and Heat Stabilized Weather Resistant Nylon 6.
PAGE 105
ELECTRICAL SOLUTIONS A. System Overview Pan-Ty ® Ladder Style Stud Mounted Cable Tie – Heat Stabilized Nylon 6.6 • For high temperature applications up to 239°F (115°C) – indoor use • Integral mount pushes onto a threaded stud and tie wraps around bundle • Tie can be removed from the stud by turning counterclockwise • Adjustable, releasable, and re-usable • Install by hand – no tools required B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Boss Height In. Recommended Stud Size Max.
PAGE 106
ELECTRICAL SOLUTIONS A. System Overview B1.
PAGE 107
ELECTRICAL SOLUTIONS A.
PAGE 108
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Ty ® Triple Loop Cable Tie – Weather Resistant Nylon 6.6 • Greater resistance to damage caused by ultraviolet light – indoor or outdoor use • A fast and economical method to secure and separate three bundles • Third loop can be installed with Panduit cable tie installation tools B2. Cable Accessories B3. Stainless Steel Ties D3 D2 C1. Wiring Duct D1 Assembled View C2. Surface Raceway Part Number C3. Abrasion Protection C4.
PAGE 109
ELECTRICAL SOLUTIONS A. System Overview Sta-Strap ® Chassis/Panel Mount Ties – Heat Stabilized Weather Resistant Nylon 6.
PAGE 110
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Cable Marker Straps – Polyethylene • • • • Identify and code telephone and fiber optic cable Eliminate the need for costly and cumbersome lead marking tags Lightweight and easy to install Use as wrap-around or flag marker • For underground identification applications • Can be marked with Panduit marker pens, see page B1.51 • Custom imprinting with text, symbols, or trademarks available using Panduit Custom Hot Stamping Service, see page B1.93 B2.
PAGE 111
ELECTRICAL SOLUTIONS A. System Overview Specialty Cable Ties B1. Cable Ties Material and Color Chart Panduit Material Nylon 6.6 Weather Resistant Nylon 6.6 Nylon 6.6 Nylon 6.6 Color Natural Black Red Gray Suffix ✓ 0 2 8 Panduit Material Heat Stabilized Nylon 6.6 Heat Stabilized Weather Resistant Nylon 6.6 Color Black Suffix 30 Black 300 B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct ✓Denotes Panduit Natural Nylon 6.6 (no suffix). C2. Surface Raceway C3.
PAGE 112
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Ty ® Striped Cable Ties – Nylon 6.6 • Nylon material for indoor use • Striped Pan-Ty ® Cable Ties in 25 color combinations match the universally accepted Even-Count Color Code • Solid color ties are available for identification of “super groups” in cable containing more than 600 pairs • Each 50-piece package fits in the Pan-Pouch ™ Kit or pocket pouch shown on the next page B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 113
ELECTRICAL SOLUTIONS A. System Overview Telephone Cable Identification Kits • Pan-Pouch ™ Kit is made of two-ply laminated black nylon/vinyl and folds for easy storage • Easily hang pouch from cable by using hook and loop fasteners • Pocket pouch holds five (50-piece) packages and is made of a white vinyl Dimensions Part Number PPC25X50F Closed 10.5" x 6" (267mm x 152mm) B1. Cable Ties Std. Pkg. Qty.
PAGE 114
ELECTRICAL SOLUTIONS A. System Overview Cable Tie Kits in Plastic Boxes and Bags B1. Cable Ties Std. Pkg. Qty. 1 Part Number KP-506A Part Description Kit for Indoor Use Pan-Ty ® Cable Ties and Mounts: Natural Nylon 6.6 (100) PLT1M (100) PLT1.5I (100) PLT2S (50) ABM2S-A mounts KP-506A-0 Kit for Outdoor Use Pan-Ty ® Cable Ties and Mounts: Black Weather Resistant Nylon 6.6 (100) PLT1M-0 (100) PLT1.
PAGE 115
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Hook and Loop Cable Ties The comprehensive family of hook and loop cable ties delivers reliability by protecting against over-tensioning of high performance fiber and copper cables. These ties are adjustable, releasable, and re-usable to effectively support frequent moves, adds, and changes (MACs). A wide range of colors provides flexibility and an aesthetically pleasing appearance.
PAGE 116
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Hook and Loop Cable Ties B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway Product, Color (Suffix) Style/Function Part Number Prefix Tak-Ty Ties, Black (0) Loop Ties/Re-usable Strip Ties/Re-usable 15' and 75' Rolls/Re-usable Strip Ties/Re-usable/Brick HLT HLS HLM, HLS HLB B1.87 B1.87 B1.87 B1.
PAGE 117
ELECTRICAL SOLUTIONS A.
PAGE 118
ELECTRICAL SOLUTIONS A. System Overview B1.
PAGE 119
ELECTRICAL SOLUTIONS A.
PAGE 120
ELECTRICAL SOLUTIONS A. System Overview Hook and Loop Cable Ties B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Color Chart Color Black Red Orange Yellow Green Panduit Suffix 0 2 3 4 5 Color Blue 6 Gray White Maroon 8 10 12 C1. Wiring Duct C2. Surface Raceway Part Number Availability List C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4.
PAGE 121
ELECTRICAL SOLUTIONS A. System Overview HLW Marker Hook and Loop Wrap Ties • Safe choice for network cable bundling • Re-usable multiple times; use where frequent moves, adds, and changes are anticipated Part Number HLWM1.5S-X0 HLWM3S-X0 • Black tie contains a white rectangular "write-on" area where users can write a message using Panduit permanent marking pens on page B2.28 • Minimum 2" overlap required to achieve loop tensile rating Max. Bundle Diameter Length In. In. (mm) (mm) 1.5 6.0 (38) (152) 3.
PAGE 122
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Cable Bundle Organizing Tool • Reduces cable installation time up to 50% compared to traditional methods • Arranges 24 cables prior to applying Panduit network cable ties • Optimizes bundle size and improves installed appearance • Two inserts handle multiple network cable diameters B3. Stainless Steel Ties Part Number Description CBOT24K Kit contains jacket cover with hook and loop fastener and two inserts. C1.
PAGE 123
ELECTRICAL SOLUTIONS A. System Overview Hot Stamping Service Custom Printed Cable Ties B1. Cable Ties Custom Hot Stamping Service provides a permanent, high quality imprinted message on Panduit cable ties and marker plates. Graphics, text, numbers and colors provide a variety of choices for customization. Hot stamped cable ties and marker plates are typically used for identification, or for labeling critical components.
PAGE 124
ELECTRICAL SOLUTIONS A. System Overview Panduit Cable Tie Approvals B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Logo (Symbol) Agency C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index B1.
PAGE 125
ELECTRICAL SOLUTIONS A. System Overview Military Cross Reference The Panduit cable ties and marker ties listed in the following tables meet all of the testing requirements of Aerospace Standard SAE-AS23190A (formerly MIL-S-23190E) and the dimensional requirements of Aerospace Standards SAE-AS33671 (formerly MS3367) and SAE-AS33681 (formerly MS3368). B2. Cable Accessories Cable Tie Cross Reference Mil. Std.
PAGE 126
ELECTRICAL SOLUTIONS A. System Overview Military Cross Reference (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index Cable Tie Cross Reference Mil. Std.
PAGE 127
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Cable Tie Cross Reference Mil. Std.
PAGE 128
ELECTRICAL SOLUTIONS A. System Overview Cable Tie Selection and Specification Guidelines B1. Cable Ties Selecting the Proper Cable Tie Material for Your Application B2. Cable Accessories By using the information on our material selection chart on pages B1.2 and B1.3 as a guide, the user will be better equipped to select the best cable tie and material suited to perform its intended function over a long period of time. B3.
PAGE 129
ELECTRICAL SOLUTIONS A. System Overview Weathering Over a period of time, ultraviolet light (a component of sunlight) attacks most plastic materials and reduces their properties by breaking the molecular chain. The material breakdown is accompanied by reductions in tensile strength and elongation, increased brittleness, color changes and loss of surface gloss. Carbon black, which is used in Panduit nylon, polypropylene, and acetal cable ties, is one of the most effective stabilizers known today.
PAGE 130
ELECTRICAL SOLUTIONS A. System Overview Weathering (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Material Failure Testing Property decay can lead to three different modes of failure: loss of strength, loss of toughness, or change in appearance. The critical mode for any given application would depend upon the application and the requirements it places upon the material itself.
PAGE 131
ELECTRICAL SOLUTIONS A. System Overview Flammability B1. Cable Ties Flammability A number of test procedures have been developed which can be used for the evaluation and comparison of various materials to support combustion. B2. Cable Accessories UL 94 Vertical Burning Test Samples of a material, with dimensions 127mm by 12.7mm and the thickness of the intended end use product, are tested in an unaged “as manufactured” state and in an aged state (seven days at 158°F, 70°C).
PAGE 132
ELECTRICAL SOLUTIONS A. System Overview Flammability (continued) B1. Cable Ties ASTM D 635 B2. Cable Accessories Samples of a material, with dimensions 125mm by 12.5mm and the thickness of the intended end use product, are tested in an unaged “as manufactured” state. A precisely controlled flame is applied to the specimen and a stopwatch is started. The flame is applied for 30 seconds.
PAGE 133
ELECTRICAL SOLUTIONS A. System Overview Radiation/Moisture/Temperature/Tensile Strength B1. Cable Ties Radiation Installed cable ties of various materials have been exposed to different amounts of radiation to determine the maximum acceptable limit. These tests were conducted by Panduit to determine the acceptability for use in various areas of nuclear power plants (for radiation exposure accumulated over a 40 year life). See Cable Tie Selection Chart (pages B1.2 and B1.3) for radiation resistance rating.
PAGE 134
ELECTRICAL SOLUTIONS A. System Overview Table C – Chemical Resistance Table B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index B1.
PAGE 135
ELECTRICAL SOLUTIONS A.
PAGE 136
ELECTRICAL SOLUTIONS A. System Overview Table C – Chemical Resistance Table (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index B1.
PAGE 137
ELECTRICAL SOLUTIONS A.
PAGE 138
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index B1.
PAGE 139
ELECTRICAL SOLUTIONS A. System Overview MANUAL CABLE TIE INSTALLATION TOOLS Panduit provides the most preferred hand-operated tools in the industry. These versatile tools can be used for production, maintenance, or construction applications. B1. Cable Ties B2. Cable Accessories B3.
PAGE 140
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Hand Tools, Accessories, and Kits Hand Tools B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection Manual Tool Controlled Tension and Cut-Off Recommended usage: under 50,000 ties/year Typical applications: Low to medium volume tie usage in OEM, MRO, or construction Cross Section SM M I S HS LH H EH GTS X X X X Tool Part Number – Page B1.
PAGE 141
ELECTRICAL SOLUTIONS A. System Overview Cable Tie Tools – Tool Controlled Tension and Cut-Off • Used in production, maintenance, or construction applications • Tool controlled tension provides flush cut-off and speeds installation to lower installed cost • Lightweight and balanced • Easy to change tension adjustment and easy to operate • A combination of design, operation, and construction features, provides a long service life • Replacement blades available, see page B1.
PAGE 142
ELECTRICAL SOLUTIONS A. System Overview Cable Tie Tools – Installer Controlled Tension and Cut-Off • Economical series of tools for maintenance or construction applications B1. Cable Ties • Excellent tools for low volume applications B2. Cable Accessories B3. Stainless Steel Ties STS2 C3. Abrasion Protection Color Black S, HS, LH, H Red 2.5 71 Economical tool with short handle span and top loading feature for rightor left-handed users. 1 ST3EH LH, H, EH Blue/Black 9.
PAGE 143
ELECTRICAL SOLUTIONS A. System Overview Pneumatic Hand Tools – Tool Controlled Tension and Cut-Off • Pneumatic, push button operation tensions and cuts off excess tie in a fraction of a second • Durable, lightweight, ergonomic design is easy to operate and designed to reduce operator fatigue • Easy to change tension adjustment • Operates on non-lubricated air, without special maintenance B1. Cable Ties B2. Cable Accessories PTS Part Number PTS Used with Cable Ties SM, M, I, S Weight Oz. g 17.
PAGE 144
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Hand Tool Accessories: Tool Tension Locking Kits • For applications requiring a locking device on either the selector knob (one cross section size and tension only) or tension level adjustment (but allow cross section size changes) B2. Cable Accessories Part Number KGTSTL KGTHTL KPTSTL TTLK3 B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway D1. Terminals D2. Power Connectors Std. Pkg. Qty. 1 1 1 1 Contents Lockout cap and screw.
PAGE 145
ELECTRICAL SOLUTIONS A. System Overview AUTOMATIC CABLE TIE INSTALLATION SYSTEMS The complete line of Panduit automatic cable tie installation systems offers a superior solution for high volume harness, assembly, fastening and packaging applications. These ergonomic systems increase productivity,provide consistent performance,and reduce activities that lead to repetitive motion injuries. A variety of tool options provide users with flexible solutions for their unique application needs. B1. Cable Ties B2.
PAGE 146
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Selection Guide – Automatic Installation Systems and Reel-Fed Cable Ties Recommended for annual usage of over 250,000 cable ties/year. Typical applications: High volume OEM/contract manufacturing. PAT2S/PAT3S Systems PAT1M/PAT1.5M Systems Tool Head for use with STANDARD Cross Section Tool Head for use with MINIATURE Cross Section Part Number PAT1M PAT1.
PAGE 147
ELECTRICAL SOLUTIONS A. System Overview Tool Head – Multiple sizes accommodate a wide variety of applications • Ergonomic, lightweight design reduces operator fatigue and repetitive motion injuries – no counter balance required • Right or left hand operation • Durable, one-piece cable tie tip collector (for cut-off tips) • Includes tension adjustment • Built-in safety interlock prevents false triggering if anything obstructs jaw path B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties PAT1.
PAGE 148
ELECTRICAL SOLUTIONS A. System Overview Transfer Hoses B1. Cable Ties Part Number PHM1 PHM2 PHM3 PHM4 PHS2 PHS3 B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct PHM3 C4. Cable Management PAT1M, PAT1.5M Part Description Transfers cable tie and signal from dispenser to tool head; electrical connectors designed for easy attachment provide a reliable, secure connection. PAT2S, PAT3S Length Ft. m 3.2 1 6.5 2 10.0 3 13.1 4 6.5 2 10.0 3 Std. Pkg. Qty. 1 1 1 1 1 1 Dispenser Frame C2.
PAGE 149
ELECTRICAL SOLUTIONS A. System Overview Data Interface Software and Ethernet Enabled Dispenser Panduit exclusive Ethernet enabled dispenser and customized data interface software allow production personnel to monitor real-time data in a shop floor environment. The Ethernet enabled dispenser provides a physical connection between the cable tie installation system and an Industrial Ethernet Network via an RJ45 connection and internal Ethernet card.
PAGE 150
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories BT-XMR Reel-Fed Cable Ties • Continuously molded cable ties (5,000 ties/reel) provide continuous feeding for high productivity and reduced downtime due to fewer reel changes • Reel-fed cable ties with exclusive stainless steel locking barb and 30 lbs.
PAGE 151
ELECTRICAL SOLUTIONS A. System Overview PLT-XMR Reel-Fed Cable Ties • Continuously molded cable ties (5,000 ties/reel) provide continuous feeding for high productivity and reduced downtime due to fewer reel changes • All-nylon, one-piece locking ties with 18 lbs. minimum loop tensile strength in miniature cross section • Available in a variety of colors and materials • Reel-fed cable ties in Nylon 6.6 material (except black) are UL Listed for use in plenum or air handling spaces per NEC B1.
PAGE 152
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties PLT-VMR Reel-Fed Cable Ties • Continuously molded cable ties (2,500 ties/reel) provide continuous feeding for high productivity and reduced downtime due to fewer reel changes • All-nylon, one-piece locking ties with 50 lbs. minimum loop tensile strength in standard cross section for larger bundles up to 1.94" (49mm) diameter • Reel-fed cable ties in Nylon 6.6 material (Natural color) are UL Listed for use in plenum or air handling spaces per NEC B2.
PAGE 153
ELECTRICAL SOLUTIONS A. System Overview CABLE ACCESSORIES Panduit provides a comprehensive offering of cable accessories. These accessories are engineered to speed installation and lower installed costs for routing and managing cable.Panduit cable accessories are designed and manufactured to meet applicable quality standards including International, UL, Military, ISO and Aerospace. B1. Cable Ties B2. Cable Accessories B3.
PAGE 154
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Cable Accessories Products Overview – Used with Cable Ties Adhesive Backed Cable Tie Mounts Pages B2.4 – B2.10 • Uses premium Panduit adhesive for a long-term, reliable bond • Adhesive backing allows routing of wires and cables where mounting holes cannot be drilled B2. Cable Accessories • Mounts should be used with Panduit cable ties for a complete wire routing solution B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3.
PAGE 155
ELECTRICAL SOLUTIONS Cable Accessories Products Overview – Used without Cable Ties Adhesive Backed Clips and Clamps Pages B2.30 – B2.39 • A wide range of styles and sizes of adhesive backed clips and clamps to secure a variety of cables, from individual small diameter wires to large flat cables • Products come in designs that use friction to hold a few cables, or more secure releasable latching designs • Uses premium Panduit adhesive for a long-term, reliable bond A. System Overview B1. Cable Ties B2.
PAGE 156
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties 4-Way Adhesive Backed Cable Tie Mounts • Allow cable tie entry from all four sides • Available in multiple sizes to match application load requirements .75 (19.1) .50 (12.7) B2. Cable Accessories .50 (12.7) B3. Stainless Steel Ties C1. Wiring Duct 1.00 (25.4) .75 (19.1) ABMM 1.12 (28.6) .20 (5.1) ABM100 ABM2S 2.00 (50.8) 1.50 (38.1) .14 (4.1) ABM112 2.00 (50.8) .25 (6.4) .25 (6.4) ABM4H ABM3H Std. Pkg. Qty. Std. Ctn. Qty.
PAGE 157
ELECTRICAL SOLUTIONS A. System Overview 4-Way Adhesive Backed Cable Tie Mounts (continued) Part Number Used with Cable Ties‡ Material Color Environment Mounting Method* Std. Pkg. Qty. Std. Ctn. Qty. B1. Cable Ties 500 5000 B2. Cable Accessories 500 5000 4-Way Mounts for Installation with Screws or User-Supplied Adhesive ABMM-D ABS White Indoors ABS White Indoors M, I ABM2S-S6-D ABM100-S6-C ABM100-S6-C69 Nylon 6.6 M, I, S Flame Retardant Nylon 6.
PAGE 158
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 159
ELECTRICAL SOLUTIONS A. System Overview Super-Grip ™ Adhesive Backed Cable Tie Mounts • Low profile design keeps bundle close to mounting surface • Small overall size allows use where space is limited 1.00 (25.4) .75 (19.0) .20 (5.2) SGABM25 SGABM20 .30 (7.7) .33 (8.4) Used with Cable Ties‡ SGABM30 B2. Cable Accessories 2.00 (50.8) 1.50 (38.10) 1.12 (28.6) B1. Cable Ties 2.00 (50.8) 1.50 (38.10) 1.12 (28.6) 1.00 (25.4) .75 (19.
PAGE 160
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Combination Adhesive Mount/Cable Ties • Adhesive mount and cable tie molded as one-piece helps reduce inventory costs • Available with locking or releasable tie .148 (3.76) .30 (7.6) .19 (4.8) .90 (22.9) 1.00 (25.4) B3. Stainless Steel Ties C1. Wiring Duct • For indoor use only • Material: Nylon 6.6 7.4 (188) Std. Pkg. Qty. Std. Ctn. Qty.
PAGE 161
ELECTRICAL SOLUTIONS A. System Overview Epoxy Applied Mounts • Provide a fast, strong, economical method to secure wire/cable to most surfaces • Eliminate the need to drill holes B1. Cable Ties .98 (24.9) B2. Cable Accessories .98 (24.9) .26 (6.6) Part Number EMS-A-C EMS-A-C0 Used with Cable Ties‡ Material Nylon 6.6 Weather Resistant Nylon 6.6 M, I, S Color Natural Black B3. Stainless Steel Ties Environment Indoors Outdoors Mounting Method Std. Pkg. Qty. Std. Ctn. Qty.
PAGE 162
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection Tie Mounts – Applied with User Supplied Adhesives • Solid flat bottom surface provides maximum holding area • For indoor use only • Material: Nylon 6.6 Used with Cable Ties‡ M M, I, S Part Number TM1A-C TM2A-C Mounting Method Color User Suppled Adhesive Natural TM3A-C M, I, S, HS, LH Std. Std. Pkg. Ctn. Qty. Qty.
PAGE 163
ELECTRICAL SOLUTIONS A. System Overview Cable Tie Mounts – Screw Applied • Unique cradle design provides maximum stability for the cable bundle • Low profile design keeps bundle close to mounting surface • Wide selection of materials available • UL Recognized except HVTM and SGTM series B1. Cable Ties B2. Cable Accessories A B3. Stainless Steel Ties B C C1.
PAGE 164
ELECTRICAL SOLUTIONS A. System Overview Extra-Heavy Cable Tie Mounts – Screw Applied • Unique cradle design provides maximum stability for cable bundle • Route and support large diameter and heavy cable bundles B1. Cable Ties 1.65 (42.0) B2. Cable Accessories .61 (15.5) .74 (19.0) 1.05 (26.7) B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway Part Number TMEH-S8-Q0 TMEH-S10-Q0 TMEH-S25-Q0 Used with Cable Ties‡ Material Weather Resistant Nylon 6.
PAGE 165
ELECTRICAL SOLUTIONS A. System Overview 4-Way Tie Anchor Mounts – Screw Applied • 4-way cable tie entry makes part orientation fast and easy B1. Cable Ties • Small overall size allows for use where space is limited B2. Cable Accessories .20 (5.1) .38 (9.5) .75 (19.0) Part Number TA1S8-C TA1S8-M0 Used With Cable Ties‡ TA1S8-M30 Hole Diameter In. mm 0.17 4.3 0.17 4.3 B3. Stainless Steel Ties Mounting Environment Method Indoors #8 (M4) Screw Outdoors #8 (M4) Screw Std. Pkg. Qty. 100 1000 Std.
PAGE 166
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Low Profile Mounts – Screw Applied • Low profile design keeps bundle close to mounting surface • Small overall size • Install with a screw or rivet for a strong, secure installation B2. Cable Accessories • For indoor use only • Material: Nylon 6.6 .75 (19.1) .40 (10.2) .32 (8.1) B3. Stainless Steel Ties .10 (2.5) .50 (12.7) LPMM .12 (3.0) LPMS C1. Wiring Duct C2. Surface Raceway Part Number LPMM-S2-C LPMM-S5-C LPMS-S8-C C3.
PAGE 167
ELECTRICAL SOLUTIONS A. System Overview Cable Tie Plates • Slotted mounting hole accommodates various fastener spacing • Low profile design keeps bundle close to mounting surface • For indoor use only • Material: Nylon 6.6 B1. Cable Ties A B2. Cable Accessories D B C B3. Stainless Steel Ties Used with Cable Ties‡ M, I, S Part Number TP2-C TP4H-C M, I, S, HS, LH, H Length A In. mm 1.98 50.3 Width B In. mm .50 12.7 Height C In. mm .13 3.2 Hole Spacing D In. mm 1.60 40.6 Color Natural Std.
PAGE 168
ELECTRICAL SOLUTIONS A. System Overview Multiple Tie Plates (continued) B1. Cable Ties B2. Cable Accessories Part Number MTP3S-E6-C Length A No. of Used with Bundles Cable Ties‡ In. mm 4.25 108.0 M, I, S MTP3S-E10-C B3. Stainless Steel Ties MTP3H-E6-C 3 M, I, S, HS, LH, H MTP3H-E10-C C1. Wiring Duct MTP4S-E6-C C2. Surface Raceway MTP4H-E6-C C3. Abrasion Protection MTP5S-E6-C C4.
PAGE 169
ELECTRICAL SOLUTIONS A. System Overview Right Angle Mounts • Hold cable bundles away from the sharp edges of bulkheads or cabinet holes • Can also be used to mount cable bundles adjacent to any surface • For indoor use only • Material: Nylon 6.6 B1. Cable Ties A B B2. Cable Accessories C B3. Stainless Steel Ties D Part Number RAMS-S3-M RAMH-S6-D RAMH-S10-D Used with Length A Cable Ties‡ In. mm M, I, S .56 14.2 M, I, S, HS, LH, H 1.00 25.4 M, I, S, HS, LH, H 1.00 25.4 Width B In. mm .39 9.
PAGE 170
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Stud Tie Mounts • Easily applied to bolts or studs with a light hammer blow or turning of the mount • Designed for use with cable ties to route and secure cable bundles, air, water and hydraulic lines B2. Cable Accessories C4. Cable Management 1.99 (50.6) 1.25 (31.8) 1.00 (25.4) .48 (12.2) TMSTH TMSTLH C1. Wiring Duct C3. Abrasion Protection 1.10 (27.9) .95 (24.1) B3. Stainless Steel Ties C2.
PAGE 171
ELECTRICAL SOLUTIONS A. System Overview Metal Screw-On Mount • Screw applied aluminum mounting base for a secure support in demanding applications B1. Cable Ties 1.00 (25.4) .50 (12.7) B2. Cable Accessories .14 (3.6) Part Number MBMS-S10-CY Used with Cable Ties‡ M, I, S Material Aluminum Environment Indoors/Outdoors B3. Stainless Steel Ties Max. Static Load Lbs. g 10.00 4540 Mounting Method #10 (M5) Screw Std. Std. Pkg. Ctn. Qty. Qty. 100 1000 C1.
PAGE 172
ELECTRICAL SOLUTIONS A. System Overview Push Mounts • Require no adhesive or additional mounting hardware • Can be used where only one side of the panel is accessible B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Part Number PM2H25-C PM2H25-M0 Used with Cable Ties‡ Max. Panel Thickness In. mm .125 3.2 .125 3.2 Panel Hole Diameter In. mm .250 6.4 .250 6.4 M, I, S C2. Surface Raceway PM2H25-M30 .125 3.2 .250 6.4 Material Nylon 6.6 Weather Resistant Nylon 6.
PAGE 173
ELECTRICAL SOLUTIONS A. System Overview Masonry Push Mounts • Used to secure wire, cable, or tubing to masonry surfaces • Installed quickly into pre-drilled holes; design holds bundle securely • Material: Impact Modified Weather Resistant Nylon 6.6 B1. Cable Ties B B2. Cable Accessories C A Grip Length A In. mm Used with Cable Ties‡ Part Number B3. Stainless Steel Ties Height B In. mm Hole Diameter C In mm Std. Std. Mounting Pkg. Ctn. Color Environment Method Qty. Qty. C1.
PAGE 174
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Fir Tree Push Mounts • Unique alternating barb design • Lock securely into position • Umbrella tensioning • Exclusive contoured anvil head • Material: Heat Stabilized Nylon 6.6 B2. Cable Accessories B B3. Stainless Steel Ties A C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management Head Diameter In. mm .67 17.0 Panel to Top of Mount In. mm .26 6.6 Overall Height In. mm .54 13.8 Panel Hole Diameter Range In. mm .
PAGE 175
ELECTRICAL SOLUTIONS A. System Overview Control Panel Mounts • Installed behind control panel switch • Ideal for high strain areas where cable is routed from panel to panel door • Compatible with most control panel switch designs • Indoor use only B1. Cable Ties B2. Cable Accessories A B3. Stainless Steel Ties B C C1. Wiring Duct Part Number CPM87S-C Used with Cable Ties‡ M, I, S CPM122S-C M, I, S Length A In. mm 2.01 51.1 Width B In. mm .89 22.6 Height C In. mm .17 4.
PAGE 176
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Flat Pan-Post ™ Standoffs .61 (15.5) B2. Cable Accessories .75 (19.0) Part Number PPF2S-S25-V M, I, S PPF2S-S25-V69 PPF2SV-S25-V C4. Cable Management M, I, S, HS, LH, H, HLM, HLS PPF2SV-S25-V69 1.38 (34.9) .37 (9.4) TYP .19 (4.8) REF Used with Cable Ties‡ .26 (6.6) 1.62 (41.3) REF .40 (10.2) TYP C1. Wiring Duct C3. Abrasion Protection .61 (15.5) REF .28 (7.2) 1.50 (38.1) REF B3. Stainless Steel Ties C2.
PAGE 177
ELECTRICAL SOLUTIONS A. System Overview Flat Cable Mounting System – FCB Base and FCPI Plate • Secures stacked cables, folds, and breakouts, as well as laminated and molded bus bars • Use one base, one corresponding size plate (FCPI), and one Intermediate cross section cable tie • For indoor use only • See also Latching Flat Cable Mounts on page B2.38 • Material: Nylon 6.6 B1. Cable Ties B2. Cable Accessories D B B C B3. Stainless Steel Ties C A A FCPI Part Number FCBI1-A-C20 Max.
PAGE 178
ELECTRICAL SOLUTIONS A. System Overview Closed Connector Rings • Connect multiple cable bundles B1. Cable Ties A B2. Cable Accessories C B3. Stainless Steel Ties C1. Wiring Duct Part Number CR2-M CR4H-M CR4H-M0 C2. Surface Raceway Used with Cable Ties‡ M, I, S M, I, S, HS, LH M, I, S, HS, LH Length A Width B B Height C In. 0.33 mm 8.4 In. 0.20 mm 5.1 In. 0.20 mm 5.0 0.57 14.5 0.36 9.1 0.30 7.6 0.57 14.5 0.36 9.1 0.30 7.6 Material Nylon 6.
PAGE 179
ELECTRICAL SOLUTIONS A. System Overview Cable Spacer Cross • Connects two bundles at 90° • Separates bundles to prevent abrasion • Dual cradle design stabilizes cable bundle B1. Cable Ties .45 (11.4) B2. Cable Accessories .37 (9.4) B3. Stainless Steel Ties .25 (6.3) Part Number CSCS-M Used with Cable Ties‡ M, I, S Material Nylon 6.6 Color Natural Environment Indoors Mounting Method Cable Ties Std. Pkg. Qty. 1000 Std. Ctn. Qty.
PAGE 180
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Aerial Support Ties – Weather Resistant Polypropylene • Designed to attach coax or telephone cable to the 1/4" (6.4mm) or 5/16" (7.9mm) support strand to form the expansion loop and keep equipment and cables clear of pole hardware B2. Cable Accessories • One-piece construction with integral 1/2" (12.
PAGE 181
ELECTRICAL SOLUTIONS A. System Overview Marker Plates – Loose Piece • Install as flags, tags, or wrap-around identification plates to clearly identify all wire harnesses • Use with nylon marking pens for an easy and economic alternative to identify wire harnesses • Available in black or white to match the wire harness • Thickness: .02 inches (0.5mm) B1. Cable Ties B2. Cable Accessories A .44 (11.2) B B3. Stainless Steel Ties C Part Number Used with Cable Ties‡ Length A In. mm Width B In.
PAGE 182
ELECTRICAL SOLUTIONS A. System Overview Cable and Wire Mounting Devices (Used without Cable Ties) B1. Cable Ties Wiring accessories are an integral part of the Panduit comprehensive selection of wire management products. B2. Cable Accessories These accessories are one piece solutions that help provide the lowest installed cost for controlling, mounting, and protecting wire and cable. Mounting methods include: • • • • B3.
PAGE 183
ELECTRICAL SOLUTIONS A. System Overview Adhesive Backed Cord Clips • Cables are easily snapped into or out of the clips C Part Number ACC19-A-C ACC19-AT-C ACC19-A-C20 ACC19-AT-C0 Max. Bundle Diameter In. mm 0.19 4.8 0.19 4.8 0.19 4.8 0.19 4.8 Length A In. mm 0.75 19.0 0.75 19.0 0.75 19.0 0.75 19.0 ACC19-AV-M300 0.19 4.8 0.75 19.0 0.62 15.7 0.38 6.4 ACC38-A-C ACC38-AT-C ACC38-A-C20 ACC38-AT-C0 0.38 0.38 0.38 0.38 9.7 9.7 9.7 9.7 1.00 1.00 1.00 1.00 9.7 9.7 9.7 9.7 ACC38-AV-M300 0.38 9.7 1.
PAGE 184
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties “J” Clips • Low profile clips retain cords, cables, or tubing • Flexible design allows for easy cord insertion, yet holds bundle tightly • For indoor use only • Material: PVC B2. Cable Accessories C B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals A B Part Number AJC12-A-C AJC19-A-C AJC25-A-C AJC31-A-C AJC38-A-C Max. Bundle Diameter In. mm 0.12 3.0 0.19 4.8 0.25 0.31 0.
PAGE 185
ELECTRICAL SOLUTIONS A. System Overview A2C Type Clips • Hold cords, cables, and tubing • Two rubber adhesive pads for added strength • For indoor use only • Material: PVC B1. Cable Ties B B2. Cable Accessories C A Part Number A2C12-A-C8 Max. Bundle Diameter In. mm 0.12 3.0 Length A In. mm 1.30 33.0 Width B In. mm 0.63 16.0 Height C In. mm 0.23 5.8 A2C25-A-C8 A2C38-A-C8 A2C50-A-C8 0.25 0.38 0.50 1.43 1.56 1.72 0.63 0.63 0.63 0.36 0.49 0.61 6.4 9.5 12.7 36.3 39.6 43.7 16.0 16.0 16.0 9.
PAGE 186
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Latching Wire Clips • Route and secure cords and cables • Convenient releasable latch • Available in six sizes with releasable latch • Push barb parts are for use with a max panel thickness of 0.11" (2.7mm) and a hole diameter of .22" (5.6mm) • For indoor use only • Material: Nylon 6.6 B2. Cable Accessories C B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2.
PAGE 187
ELECTRICAL SOLUTIONS A. System Overview Bevel Entry Clips • Beveled entry allows for easy insertion of cable bundle B1. Cable Ties C A A BEC Part Number Max. Bundle Diameter In. mm B2. Cable Accessories B C Length A In. mm Width B In. mm B3. Stainless Steel Ties BECP Height C In. mm Material Color Std. Std. Mounting Pkg. Ctn. Environment Method Qty. Qty. Adhesive Backed BEC38-A-L 0.38 9.6 1.46 37.1 1.24 31.5 0.52 13.2 BEC38-A-L20 0.38 9.6 1.46 37.1 1.24 31.5 0.52 13.
PAGE 188
ELECTRICAL SOLUTIONS A. System Overview Adhesive Backed Dual Cord Clip • Holds two cables in high temperature applications B1. Cable Ties .68 (17.3) .44 (11.2) B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Part Number ADCC31-AT-C10 Max. Bundle Diameter In. mm 0.33 9.0 1.00 (25.4) Material NORYL* Color White Environment Indoors Adhesive Type Acrylic Std. Pkg. Qty. 100 Std. Ctn. Qty. 500 *NORYL Thermoplastic Resin is a registered trademark of General Electric Company. C2.
PAGE 189
ELECTRICAL SOLUTIONS A. System Overview Adhesive Backed Latching Clips • Latching cover withstands vibration • For indoor use only B1. Cable Ties C B2. Cable Accessories A Part Number LC3-A-C8 LC5-A-C8 LC10-A-L8 Max. Bundle Diameter In. mm 0.20 5.0 0.36 9.1 0.93 23.6 Length A In. mm 0.75 19.1 1.01 25.7 1.51 38.4 Width B In. mm 0.75 19.0 1.01 25.7 1.51 38.4 B Height C In. mm 0.47 11.9 0.61 15.5 0.84 21.3 Material Color PVC Light Gray Adhesive Type Rubber Std. Std. Pkg. Ctn. Qty. Qty.
PAGE 190
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Latching Flat Cable Mounts • Available in four sizes with a stack height of .17 inches (4.3mm) to accommodate different flat cable widths • Low profile design holds wires, cables, and tubing • Convenient releasable latch B2. Cable Accessories • Large mounting base for high bonding strength • For indoor use only • Material: Nylon 6.6 0.50 (12.7) A B 1.00 (25.4) B3. Stainless Steel Ties C3. Abrasion Protection C4. Cable Management D1.
PAGE 191
ELECTRICAL SOLUTIONS A. System Overview Flat Cable Clips • Use with any width flat cable for a maximum stack height of .17 inches (4.3mm) • Low profile design holds wires, cables, and tubing • For indoor use only • Material: PVC B B1. Cable Ties B2. Cable Accessories A C B3. Stainless Steel Ties TEAR-TAB Part Number FCC5-A-C8 FCC-A-C8 Cable Width Any width flat cable Length A In. mm 1.00 25.4 Width B In. mm .56 14.2 Height C In. mm .29 7.4 1.00 1.09 .38 25.4 27.7 9.
PAGE 192
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Fixed Diameter Cable Clamps • Durable Nylon 6.6 cable clamps A (Dia.) B2. Cable Accessories C B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels B Max.
PAGE 193
ELECTRICAL SOLUTIONS A. System Overview Wire Retainers • Wires slide into the clip and are held in place by tension • Funnel entry design allows for easy insertion of cords and cables • Low profile design holds wires, cables, and tubing B1. Cable Ties 1.44 (36.5) Part Number TWR-C TWR-C0 Max. Bundle Diameter In. mm 0.38 9.5 0.38 9.5 .38 (9.5) .36 (9.1) .06 (1.5) B2. Cable Accessories .56 (14.2) Material Nylon 6.6 Weather Resistant Nylon 6.6 Color Natural Black B3.
PAGE 194
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Wire Standoffs • For retaining wires, cable, components or tubing away from panel or conductive chassis • Finger grip flanges can be easily locked or unlocked for revisions • Design of wing provides added stability • Material: Nylon 6.6 • For indoor use only B2. Cable Accessories A Max. Dia. (when closed) B3. Stainless Steel Ties B C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1.
PAGE 195
ELECTRICAL SOLUTIONS A. System Overview Snap-In Clips • Clip around bundle to hold securely in place • Clips are placed on the bundle then attached to the panel • Material: Nylon 6.6 • For indoor use only B1. Cable Ties B2. Cable Accessories A B3. Stainless Steel Ties Part Number SICH25-C SICH38-C SICH50-C SICH75-C SICH100-C SICH150-C Max. Bundle Diameter In. mm .25 6.4 .38 9.7 .50 12.7 .75 19.1 1.00 25.4 1.50 38.0 Height A In. mm .40 20.9 .54 24.9 .67 28.2 .96 35.6 1.21 41.9 1.71 54.6 Max.
PAGE 196
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Corrugated Tubing Holder with Push Mount • Use to secure and route all standard sizes of solid wall or slit corrugated loom tubing • Ribs prevent lateral movement of corrugated loom tubing along the mount • Rugged clip prevents accidental disassembly of tubing due to shock or vibration B2. Cable Accessories “A” Dia B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2.
PAGE 197
ELECTRICAL SOLUTIONS A. System Overview Optical Fiber Network Saddles • Use in pre-drilled .18 inch (4.0mm) holes in panels up to .09 inch (2.0mm) thick • Smooth rounded edges eliminate potential for snagging and stress on cable B1. Cable Ties 1.33 (33.7) 1.30 (32.9) 1.647 (41.8) VWSDC VWS106 Max. Bundle Diameter In. 1.06 1.06 1.06 1.06 B3. Stainless Steel Ties .377 (9.6) .40 (10.3) Part Number VWSDC-C* VWSDC-C20* VWS106-C VWS106-C20 B2. Cable Accessories 1.28 (32.5) 2.37 (60.1) 2.71 (68.
PAGE 198
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Circuit Board Posts • For board-to-board or board-to-chassis mounting • Bell flange on bottom end provides greater stability • Releasable and reusable • Material: Nylon 6.6 • Color: Natural B2. Cable Accessories .19 Dia. (4.7) C1. Wiring Duct Part Number CBP12-C CBP25-C CBP31-C CBP37-C CBP50-C CBP62-C CBP75-C CBP87-C CBP100-C C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors Standoff In. .
PAGE 199
ELECTRICAL SOLUTIONS A. System Overview Harness Board Accessories Panduit harness board accessories provide fast routing and forming of wires in harness fabrication. They hold the wires off the harness board at a uniform height for easy application of cable ties. The accessories are designed for use with various Panduit cable tie installation tools. To maintain the harness at a uniform height of approx. 1.33 inches (33.8mm) (at the center of the harness) above the board, use RER Elastic Retainers, BR.
PAGE 200
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Bundle Retainers • Funnel entry allows fast cable insertion • Completed bundles can be easily removed B2. Cable Accessories • For indoor use only • Color: Black .78 (19.8) A .44 (11.2) B3. Stainless Steel Ties BR2 Part Number BR.5-E6-C Standoff Height A In. mm 1.07 27.2 C2. Surface Raceway BR.75-E6-C 0.75 19.0 0.95 24.1 BR2-1.3-X 2.00 50.8 1.32 33.5 C3. Abrasion Protection BR2-1.3-A-X BR2-1.5-X BR2-4-X BR2-6-X 2.00 2.00 2.00 2.
PAGE 201
ELECTRICAL SOLUTIONS A. System Overview Wire End Holder • Secures wire ends while harness is being fabricated • Used with #28 thru #16 AWG wires • For indoor use only B1. Cable Ties .16 (4.1) .53 .77 (13.5) (20.0) .29 (7.4) B2. Cable Accessories 1.22 (31.0) B3. Stainless Steel Ties .18 (4.6) .37 (9.4) Part Number WEH-E8-C Material Acetal Color Black Std. Std. Mounting Pkg. Ctn. Method Qty. Qty. Two #8 (M4) Screws 100 1000 C1. Wiring Duct C2. Surface Raceway C3.
PAGE 202
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Fanning Strip System • Holds wires in a specific orientation • No sharp edges to damage wire insulation • Will accept wires up to 18 AWG • Fanning strip can remain as part of completed harness .53 (13.5) B2. Cable Accessories .04 (1.0) .16 (4.0) .62 (15.7) .31 (7.9) .06 (1.5) 1.42 (36.0) .04 (1.0) 6.00 (152.4) .12 (3.0) B3. Stainless Steel Ties 1.50 .75 (38.1) (19.0) 12.1 (307.
PAGE 203
ELECTRICAL SOLUTIONS A. System Overview Tie Harness Mounts • Designed to be attached to the wire harness during assembly • Cable ties can be installed by hand or with Panduit automatic cable tie tools • Used with harness board standoff posts • Available with or without corrugated tubing location tab • Natural nylon material for indoor use • Heat stabilized nylon material (30) for high temperature applications – indoor use 1.54 (39.1) B1. Cable Ties B2. Cable Accessories .37 (9.4) B3.
PAGE 204
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Automatic Cable Tie Mounts • Multiple sizes work with industry standard panel thickness and hole diameters for greater application flexibility • Low profile design keeps bundle close to mounting surface, saving space and providing greater protection for bundles in high vibration applications • Supports Miniature and Intermediate cross section cable ties A C B3. Stainless Steel Ties B C1. Wiring Duct C2.
PAGE 205
ELECTRICAL SOLUTIONS A. System Overview Physical Properties and Colors of Cable Accessory Materials‡ Design Criteria Color Glass Filled Flame Flame General Weather General Retardant Retardant Purpose Resistant Purpose Nylon 6.6 Nylon 6.6 Polypropylene Polypropylene ABS Black, Black Black Black Black Natural General Weather Flame Purpose Resistant Retardant ABS ABS Polypropylene Acetal Natural Black Black Black B1.
PAGE 206
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Selection and Use of Adhesive Mounts Panduit adhesive mounts provide a quick, economical, and dependable method of supporting, routing, and protecting wires or cables. Some are used with Panduit cable ties and others can be used without cable ties. Adhesive backed mounts adhere to a variety of surfaces.
PAGE 207
ELECTRICAL SOLUTIONS A. System Overview Selection and Use of Adhesive Mounts (continued) B1. Cable Ties Surface Preparation For best results, Panduit adhesive mounts should be applied to clean, dry, grease-free surfaces. We recommend that the surface be cleaned prior to mount installation. For rubber and acrylic based foam tape adhesives, a blend of isopropyl alcohol and water 50/50 may be used to clean most surfaces.
PAGE 208
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties NOTES B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index B2.56 Order number of pieces required, in multiples of Standard Package Quantity.
PAGE 209
ELECTRICAL SOLUTIONS A. System Overview PAN-STEEL® SYSTEM The Pan-Steel System provides a strong, durable method of bundling and mechanical fastening, for all indoor, outdoor, and underground (including direct burial) applications.The ties are designed for use in critical applications where strength, vibration, radiation, weathering, corrosion and temperature extremes are a factor. ® B1. Cable Ties B2. Cable Accessories B3.
PAGE 210
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Steel® Products Overview Pan-Steel® Cable Ties Pages B3.4 – B3.7, B3.11 – B3.13 • Designed for use in indoor, outdoor, and underground applications B2. Cable Accessories • Self-locking head design speeds installation • Strong, durable method of cable bundling • Rounded edges assure cable protection and worker safety B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway Pan-Steel® Coated Cable Ties Pages B3.8 – B3.9, B3.12 – B3.
PAGE 211
ELECTRICAL SOLUTIONS A. System Overview Pan-Steel® Products Overview (continued) Installation Tools Pages B3.14 – B3.16, B3.20, B3.26 • Used in production, maintenance, and construction applications • Full line of lightweight, ergonomic hand tools B1. Cable Ties B2. Cable Accessories • Highest reliability in the industry • Flush cut-off of ties limits exposure to sharp edges B3. Stainless Steel Ties C1. Wiring Duct Pan-Steel® Strapping Pages B3.21 – B3.
PAGE 212
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Features and Benefits – Pan-Steel® Cable Ties Panduit® Pan-Steel® Stainless Steel Ties are engineered for safety, productivity, and durability by providing round edges and smooth surfaces, easy threading, high loop tensile strength and tight clamping. Self-Locking Head Construction B2. Cable Accessories B3. Stainless Steel Ties C1.
PAGE 213
ELECTRICAL SOLUTIONS A. System Overview Part Number System for Pan-Steel® Cable Ties M LT Type MLT = Metal Locking Tie 6 S — CP Bundle Diameter Reference Cross Section (In.) S = Standard LH Standard Package Size = Light Heavy Q = 25 L* = 50 316 = Heavy LP** = 50 EH = Extra-Heavy CP = 100 EH15 = Extra-Heavy-15 B2. Cable Accessories Material (blank) = 304 H SH B1. Cable Ties B3. Stainless Steel Ties = 316 C1.
PAGE 214
ELECTRICAL SOLUTIONS A. System Overview Pan-Steel® Self-Locking Cable Ties – MLT Series (continued) B1. Cable Ties Part Number B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions Max. Bundle Diameter In. mm Length* In.
PAGE 215
ELECTRICAL SOLUTIONS A. System Overview Pan-Steel® Self-Locking Cable Ties – MLT Series (continued) Part Number Max. Bundle Diameter In. mm Heavy Cross Section MLT2H-LP316 2.0 MLT2.7H-LP316 2.7 MLT4H-LP316 4.0 MLT6H-LP316 6.0 MLT8H-LP316 8.0 MLT10H-LP316 10.0 Length* In. mm Min. Loop Tensile Strength** Lbs. N Min. Bundle Diameter In. mm Width In. mm Thickness In. mm 51 69 102 152 203 254 7.9 10.2 14.3 20.5 26.8 33.
PAGE 216
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 217
ELECTRICAL SOLUTIONS A.
PAGE 218
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 219
ELECTRICAL SOLUTIONS A.
PAGE 220
ELECTRICAL SOLUTIONS A. System Overview Pan-Steel ® Custom Length Banding – MBS, MBH, MBEH and MBSH Series • For applications that require various bundle diameters B1. Cable Ties Polyester coating (optional): • Polyester coating provides additional edge protection and prevents corrosion between dissimilar metals • UV resistant, low smoke, halogen-free material • Temperature tolerance -40°F (-40°C) to 302°F (150°C) • AISI 316 stainless steel for the most corrosive environments • Supplied in reels of 82.
PAGE 221
ELECTRICAL SOLUTIONS A. System Overview Pan-Steel Custom Length Banding – MBS, MBH, MBEH and MBSH Series ® Part Number Max. Bundle Diameter In. mm Length* Ft. m Min. Loop Tensile Strength** Lbs. N Min. Bundle Diameter In. mm Width In. mm Recommended Installation Tool*** Thickness^ In. mm Recommended Std. Banding Pkg. Head Qty.‡ B1. Cable Ties Polyester Coated AISI 316 Stainless Steel Any 82 25 250 1112 0.50 12.7 0.31 0.010 0.25 GS4MT, ST2MT, HTMT, PPTMT, PBTMT MTHCH-C316 1 B2.
PAGE 222
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties GS4MT Hand Operated Installation Tool • • • • Single handle operation for fast installation Cable tie side entry for immediate positioning of tie and tool Controlled tension, fully adjustable Easy removal of excess tie B2. Cable Accessories B3. Stainless Steel Ties Part Number Part Description Used with standard, light-heavy, and heavy cross section Pan-Steel ® type GS4MT MLT ties, type MLTC/MLTFC coated ties, and type MLTDH double wrapped ties.
PAGE 223
ELECTRICAL SOLUTIONS A. System Overview ST2MT Installation Tool • Cable tie side entry for immediate positioning of tie and tool • One hand operation – lightweight • Easy removal of excess tie B1.
PAGE 224
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories PPTMT Pneumatic Installation Tool • • • • Power assisted tool for fast and effortless installation Cable tie side entry for immediate positioning of tie and tool Controlled tension, fully adjustable Automatic cut-off B3. Stainless Steel Ties Std. Pkg. Qty. 1 Part Number PPTMT Part Description Pneumatic hand tool used with Pan-Steel® type MLT ties, type MLTC/MLTFC coated ties, and type MLTDH double wrapped ties.
PAGE 225
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Pan-Steel® Retained Tension Ties – MRT/MRS Series Panduit ® Pan-Steel® Retained Tension Ties are engineered for safety, productivity, and durability by providing round edges and smooth surfaces, easy threading, high loop tensile strength and tight clamping. B2.
PAGE 226
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Part Number System for Pan-Steel® Retained Tension Ties – MRT Series M RT 6 S Type Bundle Diameter Reference (In.) Cross Section Package Qty. Material S = Standard L = 50 4 = 304 LH = Light-Heavy C = 100 MRT = Metal Retained Tension Tie C 4 H = Heavy B3. Stainless Steel Ties Pan-Steel ® Retained Tension Ties – MRT Series C1. Wiring Duct C2.
PAGE 227
ELECTRICAL SOLUTIONS Part Number System for Pan-Steel® 360° Radial Seal Retained Tension Ties – MRS Series MRS 6 S Type Bundle Diameter Reference (In.) Cross Section S MRS = Metal Retained Tension 360° Radial Seal Tie — C = Standard L = 50 LH = Light-Heavy C = 100 B1. Cable Ties 4 Package Qty. Material 4 = 304 H = Heavy B2. Cable Accessories B3.
PAGE 228
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties MTRT Retained Tension Manual Installation Tools • Adjustable detent mechanism provides user pre-set controlled tension for repeatable installations and maximum reliability • Smooth cable tie cut-off eliminates burrs or sharp edges after installation to deliver added bundle protection and job site safety Std. Pkg. Qty.
PAGE 229
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Pan-Steel® Strapping System The Panduit ® Pan-Steel® Stainless Steel Strapping is the ultimate solution for strapping applications. The buckle design and tension controlled installation tool offer a quick and safe installation for all harsh environments. Available in four widths 3/8" (9.5mm), 1/2" (12.7mm) 5/8" (15.9mm) and 3/4" (19.
PAGE 230
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties The Panduit Method Reduces Installation Time Pan-Steel® Stainless Steel Strapping B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway 1) Place strap around the material, insert tail of strap through buckle. Pull strapping tight and bend up to hold in place. Insert tail of strapping into tool nose section. Squeeze handle to tension.
PAGE 231
ELECTRICAL SOLUTIONS A.
PAGE 232
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Steel® Nylon 11 Coated Strapping – MSC Series • Fold over design provides high-retained tension in mechanical fastening and cable bundling applications • After tensioning, cut end is locked inside low profile buckle – no sharp edges • AISI 316 stainless steel for the most corrosive environments • Available in 0.38 inch (9.5mm), 0.50 inch (12.7mm), 0.63 inch (15.
PAGE 233
ELECTRICAL SOLUTIONS A. System Overview Pan-Steel Custom Length Strapping ® • Fold over design provides high retained tension in mechanical fastening and cable bundling applications • After tensioning, cut end is locked inside low profile buckle – no sharp edges • For applications that require various bundle diameters • Supplied in reels of 82.5 feet (25m) (coated) or 100 feet (30.
PAGE 234
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties BT2HT Hand Operated Installation Tool for Strapping • Strap side entry • Easy removal of excess strap • Multi-position rear handle provides flexibility for a one or two hand installation • Installs (3) sizes: 0.38 inch (9.5mm), 0.50 inch (12.7mm), and 0.63 inch (15.9mm) • Adjustable tension control • Replacement cutter blade and handle available B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3.
PAGE 235
ELECTRICAL SOLUTIONS A. System Overview Stainless Steel Tie Mounts • Low profile • One hole mounting • For use with standard, light-heavy, and heavy cross section Pan-Steel® Ties as well as .38 inch (9.5mm) wide strapping • 304 Stainless Steel B1. Cable Ties B2. Cable Accessories A W H B3. Stainless Steel Ties Z Part Number MTM1H-C MTM1H10-C Used with Pan-Steel® Ties/Strapping Length A In. mm .90 22.6 Width W In. mm .40 10.2 Height H In. mm .17 4.4 #10 (5mm) screw .90 22.6 .40 10.2 .
PAGE 236
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Stainless Steel Push Button Mount • Low profile • No tapping required • Designed for use only where both sides of the panel are accessible • For use with standard cross section Pan-Steel® Ties • 304 Stainless Steel B2. Cable Accessories A A B3. Stainless Steel Ties A C1. Wiring Duct H W C2. Surface Raceway C3.
PAGE 237
ELECTRICAL SOLUTIONS A. System Overview Stainless Steel Bulkhead Mount • Zero profile • Mounts directly to surface • Used where only one side of the panel is accessible • Permanent, secure application • Used with standard, light-heavy, and heavy cross section Pan-Steel® Ties • 304 Stainless Steel B1. Cable Ties B2. Cable Accessories H B3.
PAGE 238
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Stainless Steel Technical Information Physical Characteristics of Stainless Steel and Aluminum Material: C1. Wiring Duct C2.
PAGE 239
ELECTRICAL SOLUTIONS A. System Overview Chemical Resistance at 70°F (21°C) Temperature % 304 and 316 Stainless Steel* Arsenic Acid % 304 and 316 Stainless Steel* % 304 and 316 Stainless Steel* 40 E Cider E Methyl Alcohol 100 E Sodium Bisulfate 10 Acetone 100 E Dichloroethane E 100 E Methyl Chloride 100 E Sodium Borate All E Aluminum Hydroxide AQ C.S.
PAGE 240
ELECTRICAL SOLUTIONS A. System Overview Rigorous Tests and Physical Properties of Stainless Steel STRENGTH: Panduit ® Pan-Steel® Stainless Steel Ties and Straps are tested per the SAE Standard AS23190 B1. Cable Ties formerly U.S. Military Specification MIL-S-23190, minimum loop tensile test. This test consists of applying a tie to a split mandrel and then measuring the force required to separate the (two) halves until the tie fails.
PAGE 241
ELECTRICAL SOLUTIONS A. System Overview WIRING DUCT B1. Cable Ties From the smallest wall mounted panels to the largest integrated turnkey systems Panduit Panduct Wiring Duct is the premium wire management solution for routing and concealing wiring in electrical control panels. Panduct ® Wiring Duct provide solutions for the original equipment manufacturing, transportation, contract manufacturing, maintenance and repair and communications markets.
PAGE 242
ELECTRICAL SOLUTIONS A. System Overview Wiring Duct for Control Panel Applications B1. Cable Ties B2. Cable Accessories PanelMax™ DIN Rail Wiring Duct 1 Up to 30% space savings vs. conventional duct/rail layouts. (pages C1.4 – C1.5) B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection PanelMax™ Noise Shield 2 Installed separately or within wiring duct. (pages C1.6 – C1.7) 5 C4. Cable Management D1. Terminals D2.
PAGE 243
ELECTRICAL SOLUTIONS A. System Overview 5 5 Type F Narrow Slot Wiring Duct Narrow slot, narrow finger design fits the spacing of high-density terminal blocks. B2. Cable Accessories (pages C1.14 – C1.15) B3. Stainless Steel Ties Type G Wide Slot Wiring Duct Wide slot, wide finger design. 3 B1. Cable Ties C1. Wiring Duct C2. Surface Raceway (pages C1.12 – C1.13) C3. Abrasion Protection 6 C4.
PAGE 244
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 245
ELECTRICAL SOLUTIONS A.
PAGE 246
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Panduct ® PanelMax ™ Noise Shield B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Metal noise barrier reduces EMI noise coupling up to 20dB, equal to 6 inches air spacing Perforated pre-scored sections aid cutting to length Durable black powder coat for smooth edges Bonding clip allows shield use within wiring duct C2. Surface Raceway C3. Abrasion Protection C4.
PAGE 247
ELECTRICAL SOLUTIONS A.
PAGE 248
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Features and Benefits – Panduct ® PanelMax ™ Corner Wiring Duct One-piece base reduces fasteners required for minimal installation time B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 249
ELECTRICAL SOLUTIONS A. System Overview PanelMax ™ Corner Wiring Duct • Fits in the unused space in the vertical corner of enclosures, gaining sub-panel space or saving enclosure footprint area • Panduit divider wall snaps directly to the integrated mounting feature in the channel to create two separate channels B1.
PAGE 250
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Panduct ® Type H and HN Hinged Cover Wiring Duct Available in eight sizes from 1.5" x 2" up to 4" x 4" in light gray, black, and white colors. B1. Cable Ties Dual-sided hinge cover opens up to 100° from either sidewall of duct for up to 20% faster wiring changes B2.
PAGE 251
ELECTRICAL SOLUTIONS A. System Overview Panduct ® Type HN Hinged Cover Narrow Slot Wiring Duct • Narrow slot/finger design provides excellent wire management with smaller wire diameters and high-density components such as terminal blocks, input/output devices, and other hardware • Material: Lead-free PVC • UL Recognized continuous use temperature: 122°F (50°C) .50 TYP [12.7] Base Part Number HN1.5X2LG6 HN1.
PAGE 252
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Features and Benefits – Panduct ® Type G Wide Slot Wiring Duct Available in 35 sizes from .5" x .5" up to 6" x 4" in a variety of colors. Exclusive Panduit smooth rounded edges prevents wiring abrasion Non-slip cover liner prevents cover slide Specially formulated lead-free PVC material C1. Wiring Duct Flush cover design provides a neat and finished appearance C2. Surface Raceway C3.
PAGE 253
ELECTRICAL SOLUTIONS A. System Overview Panduct ® Type G Wide Slot Wiring Duct • Conforms with NFPA 79-2007 section 13.3.1 requirement for flame retardant material • Provided with mounting holes • Base and cover length is 6 feet • Wide slot/finger design provides greater sidewall rigidity and can be used with a wide range of wire bundle sizes • Material: Lead-free PVC • UL recognized continuous use temperature: 122°F (50°C) • UL 94 flammability rating of V-0 W H F E For .5" duct height: 0.
PAGE 254
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Panduct ® Type F Narrow Slot Wiring Duct Available in 31 sizes from .5" x .5" up to 6" x 4" in a variety of colors. B1. Cable Ties Double restricted slot design retains wires, eliminating hassle and saving time B2. Cable Accessories B3. Stainless Steel Ties C1.
PAGE 255
ELECTRICAL SOLUTIONS A. System Overview Panduct ® Type F Narrow Slot Wiring Duct • Conforms with NFPA 79-2007 section 13.3.1 requirement for flame retardant material • Provided with mounting holes • Base and cover length is 6 feet • Narrow slot/finger design provides more slots to fit the spacing of high-density terminal blocks and other hardware • Material: Lead-free PVC • UL recognized continuous use temperature: 122°F (50°C) • UL 94 flammability rating of V-0 W H .50 TYP [12.7] .20 TYP [5.
PAGE 256
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Panduct ® Flush Cover Type D Round Hole Wiring Duct Available in sixteen sizes from 1" x 2" up to 4" x 4" in a variety of colors. B1. Cable Ties B2. Cable Accessories Round hole design retains and supports wire at variable heights to enhance wire management B3. Stainless Steel Ties Exclusive Panduit smooth rounded edges prevents wiring abrasion C1. Wiring Duct C2.
PAGE 257
ELECTRICAL SOLUTIONS A. System Overview Panduct ® Flush Cover Type D Round Hole Wiring Duct • Round hole design has multiple rows of holes to retain and support wire at variable heights and positions • Material: Lead-free PVC • UL recognized continuous use temperature: 122°F (50°C) • UL 94 flammability rating of V-0 W H .67 +- .06 TYP [16.94 +- 1.5] .44 +- .02 Ø [11.2 +- 0.5] • Conforms with NFPA 79-2007 section 13.3.
PAGE 258
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Features and Benefits – Panduct ® Type MC Metric Narrow Slot Wiring Duct Available in 20 sizes from 25mm x 25mm up to 100mm x 100mm in international gray and white colors. Non-slip cover liner prevents cover slide Double restricted slot design retains wires, eliminating hassle and saving time Narrow finger/slot design matches the spacing of high-density components C2.
PAGE 259
ELECTRICAL SOLUTIONS A. System Overview Panduct ® Type MC Metric Narrow Slot Wiring Duct • CE compliant and metric sizing for control panels intended for European applications • Material: Lead-free PVC • UL recognized continuous use temperature: 122°F (50°C) • UL 94 flammability rating of V-0 W H 0.50 TYP [12.7] 0.20 TYP [5.0] Multiple slot restrictors present with 62mm and greater duct wall height. • Conforms with NFPA 79-2007 section 13.3.
PAGE 260
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Features and Benefits – Panduct ® Type FS Solid Wall Raceway Available in 27 sizes from .5" x .5" up to 6" x 4" in a variety of colors. B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Non-slip cover liner prevents cover slide Specially formulated lead-free PVC material C2. Surface Raceway Flush cover design provides a neat and finished appearance C3. Abrasion Protection C4. Cable Management D1.
PAGE 261
ELECTRICAL SOLUTIONS A. System Overview Panduct ® Type FS Solid Wall Raceway • Solid wall design fully encloses cables providing maximum protection and aesthetics • Material: Lead-free PVC > > > > W > > H > > > > > > > > > > > > > > > Base Part Number FS.5X.5LG6NM FS.5X1LG6NM FS.75X.75LG6NM FS1X1LG6NM FS1X1.5LG6NM FS1X2LG6NM FS1X3LG6NM FS1X4LG6NM FS1.5X1LG6NM FS1.5X1.5LG6NM FS1.5X2LG6NM FS1.5X3LG6NM FS2X1LG6NM FS2X1.
PAGE 262
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Wiring Duct for Special Environments Features and Benefits – Panduct ® Type NNC Halogen-Free Metric Wiring Duct Available in fourteen sizes from 25mm x 25mm up to 100mm x 100mm in light gray and white.
PAGE 263
ELECTRICAL SOLUTIONS A. System Overview Panduct ® Type NNC Halogen-Free Metric Wiring Duct • Material: Halogen-free modified polyphenylene oxide (mPPO) material as verified with IEC 60754-2 test method (test on gases evolved during combustion of electric cables) • UL recognized continuous use temperature: 203°F (95°C) • UL 94 flammability rating of V-0 • Conforms with NFPA 79-2007 section 13.3.
PAGE 264
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Panduct ® Type NE Halogen-Free Wiring Duct • Material: Halogen-free modified polyphenylene oxide (mPPO) • UL recognized continuous use temperature: 203°F (95°C) • UL 94 flammability rating of V-0 • Provided with mounting holes • Base and cover length is 6 feet B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection W H C4. Cable Management F D1. Terminals D2. Power Connectors D3.
PAGE 265
ELECTRICAL SOLUTIONS A. System Overview WIRING DUCT TOOLS AND ACCESSORIES Panduit offers a selection of Panduct Tools and Accessories to aid cutting, modifying, and installing wiring duct. B1.
PAGE 266
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Panduct ® Type FL Flexible Wiring Duct • Material: Flexible Polypropylene • UL Recognized continuous use temperature: 149°F (65°C) • UL 94 flammability rating of V-2 • Factory applied adhesive tape provided for easy positioning** Duct Size (W x H)* B2. Cable Accessories Part Number FL12X12LG-A FL25X25LG-A FL50X50LG-A B3. Stainless Steel Ties mm 12.5 x 12.5 25.0 x 25.0 50.0 x 50.0 In. 19.7 19.7 19.
PAGE 267
ELECTRICAL SOLUTIONS A. System Overview Panduct ® Type NNC Divider Wall • NNC solid divider wall can be mounted inside NNC and NE wiring duct to create multiple channels • Material: Halogen-free modified polyphenylene oxide (mPPO) • Simply install the divider wall base when mounting the duct and snap the divider wall onto mounting base, DB-C For Nominal Duct Height Part Number NNC50DWH2 NNC75DWH2 In. 2.00 3.00 mm 50 75 Std. Pkg. Qty. 2 2 B1. Cable Ties Std. Ctn. Qty.
PAGE 268
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Panduct ® Type G and H Wiring Duct Wire Retainers • Insert between fingers of type G and H to contain wiring when cover is removed Part Number WR2-C WR2H-C WR3-C WR4-C WR5-C • Adjustable height • Material: ABS For Duct Width In. (mm) 2.00 (50.8) 2.00 (50.8) 3.00 (76.2) 4.00 (101.6) Use with: 3x5, 4x5, or 6x4 For Duct Height In. (mm) 2.00 – 4.00 (50.8 – 101.6) 2.00 – 4.00 (50.8 – 101.6) 2.00 – 4.
PAGE 269
ELECTRICAL SOLUTIONS A. System Overview Panduct ® Type F, HN and MC Duct Wire Retainers/Labeling Device • Used to contain wiring when cover is removed and can also be used as a labeling device • FWR-C is compatible with type F and HN duct sizes Part Number FWR-C FMWR-C • FMWR-C is compatible with type MC duct sizes • Material: Lead-free PVC Material Rigid PVC Rigid PVC For Duct Width In. mm 1.50 – 4.00 37.0 – 76.2 1.46 – 3.94 37.0 – 100.0 B1. Cable Ties Std. Pkg. Qty. 100 100 Std. Ctn. Qty.
PAGE 270
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Panduct ® Duct Corner Strip • Compatible with all styles of Panduit wiring duct • UL 94 flammability rating of V-0 • Material: Lead-free PVC • Slide onto duct at corner or t-junctions for smooth, round corners • Available in 6 foot lengths that can be cut to size to meet any requirement • Easy to install one-piece design B2. Cable Accessories Part Number 6' Lengths for use with all Types of PVC Wiring Duct B3. Stainless Steel Ties C1.
PAGE 271
E L E C T R I C A L S O LU T I O N S A. System Overview Panduct ® Snap-Clip Mounting Brackets • Duct easily snaps into bracket • No mounting holes required in duct • Ensures no metal is inside the duct • Snap-clip spacing is not critical • Simplifies fabrication drawings and panel layout • Material: Spring steel Part Number Screw Required For Duct Width In. mm B1. Cable Ties Std. Std. Pkg. Ctn. Qty. Qty. B2. Cable Accessories 100 100 100 100 100 1000 1000 1000 1000 1000 B3.
PAGE 272
E L E C T R I C A L S O LU T I O N S A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors Adhesive Tape for Wiring Duct • Recommended installation temperature is 70°F (21°C) • UL Recognized service temperature is 32°F (0°C) to 140°F (60°C) Duct Size (W x H) .5 x .5 thru 1.5 x 4 2 x 1 thru 3 x 3 3 x 4 thru 3 x 5 4 x 1.
PAGE 273
E L E C T R I C A L S O LU T I O N S A. System Overview Adhesive Tape Guide Selection of wiring duct part numbers available with factory applied adhesive tape. B1. Cable Ties B2. Cable Accessories G Duct Light Gray G Duct White G.5X.5LG6-A G.5X1LG6-A G.75X.75LG6-A G.75X1LG6-A G Duct Black F Duct Light Gray F Duct White FS Duct Light Gray FS Duct White FS Duct Black NE Duct White G.5X.5WH6-A — F.5X.5LG6-A — — — — — G.5X1WH6-A — — F.5X1LG6-A — — — — — — — — — G.
PAGE 274
E L E C T R I C A L S O LU T I O N S A. System Overview B1. Cable Ties Panduct ® Installation Tools • Panduit ® Panduct ® Bench Mount Wiring Duct Cutting Tool and Duct Cutting Tool easily cut Panduct ® Wiring Duct and Cover • DNT-100 notches duct sidewalls to bottom scoreline for tees and corner junctions B2. Cable Accessories Part Number PBDCT Panduit bench-mount duct cutting tool. Cuts slotted wiring ducts and wiring duct covers with up to 6" width and up to 5" height. Full 78.
PAGE 275
E L E C T R I C A L S O LU T I O N S A. System Overview Panduct ® PanelMax ™ DIN Rail Wiring Duct Dimensions Dimensions are shown for reference only. Contact Panduit Customer Service at 800-777-3300 for specific dimensional needs. 2" Duct 1.14 (29.0) 2.12 (54.0) .10 (2.5) 4" Duct 3" Duct B1. Cable Ties 50° TYP. 3.12 (79.4) .20 (5.0) 5.30 (134.6) 6.25 (158.7) 4.12 (104.8) .10 (2.5) .10 (2.5) .28 (7.0) 6.30 (160.0) 7.25 (184.1) .28 (7.0) B2. Cable Accessories 7.30 (185.4) 8.25 (209.5) B3.
PAGE 276
E L E C T R I C A L S O LU T I O N S A. System Overview Panduct ® Type G and D Wiring Duct Dimensions Dimensions are shown for reference only. Contact Panduit Customer Service at 800-777-3300 for specific dimensional needs. For .5" high duct. > C B2. Cable Accessories F > B T > > E A B3. Stainless Steel Ties D H > For .75", 1", 1.5", 2", 3", 4" and 5" high duct. > C F C1. Wiring Duct > T B D H > > C2. Surface Raceway A E Note: ‘A’ dimension is measured at base.
PAGE 277
E L E C T R I C A L S O LU T I O N S A. System Overview Panduct Type F Wiring Duct and FS Raceway Dimensions ® Dimensions are shown for reference only. Contact Panduit Customer Service at 800-777-3300 for specific dimensional needs. E C D H B T A F For 2", 3", 4" and 5" high duct. C E B T A D H F Note: ‘A’ dimension is measured at base. Note: ‘K’ dimension shown in mounting hole dimensions below. Mounting Hole Dimensions For .5", .75", 1" and 1.5" wide duct. .50 TYP [12.7] .20 TYP [5.
PAGE 278
E L E C T R I C A L S O LU T I O N S A. System Overview Panduct ® Type MC Wiring Duct Dimensions Dimensions are shown for reference only. Contact Panduit Customer Service at 800-777-3300 for specific dimensional needs. B1. Cable Ties For 25mm, 37.5mm, and 50mm high duct. B2. Cable Accessories E C B D H T B3. Stainless Steel Ties C1. Wiring Duct F A For 62.5mm, 75mm, and 100mm high duct. C E B C2. Surface Raceway T H A C3.
PAGE 279
E L E C T R I C A L S O LU T I O N S A. System Overview Panduct Type NNC Wiring Duct Dimensions ® Dimensions are shown for reference only. Contact Panduit Customer Service at 800-777-3300 for specific dimensional needs. For 25mm, 37.5mm, and 50mm high duct. 10.0 TYP [.39] C B D H T A 25.0 TYP [.98] For 75mm and 100mm high duct. C 10.0 TYP [.39] B H T D A 25.0 TYP [.98] Mounting Hole Dimensions For 25mm, 37.5mm, and 50mm width duct. 2000 mm [78.74] 14 mm [0.
PAGE 280
E L E C T R I C A L S O LU T I O N S A. System Overview Panduct ® Type NE Wiring Duct Dimensions Dimensions are shown for reference only. Contact Panduit Customer Service at 800-777-3300 for specific dimensional needs. For .5" high duct. B2. Cable Accessories F C D H B3. Stainless Steel Ties B T E C1. Wiring Duct A For 1", 1.5", 2", 3", 4" and 5" high duct. F C2. Surface Raceway C3. Abrasion Protection C4. Cable Management C D H B T E A Mounting Hole Dimensions For .5", .
PAGE 281
E L E C T R I C A L S O LU T I O N S A. System Overview Panduct Type H and HS Wiring Duct Dimensions ® Dimensions are shown for reference only. Contact Panduit Customer Service at 800-777-3300 for specific dimensional needs. 100° 1.5 x 2 (38.1) x (50.8) 1.5 x 3 (38.1) x (76.2) 2x2 (50.8) x (50.8) 2x3 C B T (50.8) x (76.2) 2x4 (50.8) x (101.6) 3x3 (76.2) x (76.2) 3x4 (76.2) x (101.6) 4x4 (101.6) x (101.6) A F A B C 1.75 (44.5) 1.75 (44.5) 2.17 (55.1) 2.17 (55.1) 2.17 (55.1) 3.25 (82.6) 3.25 (82.
PAGE 282
E L E C T R I C A L S O LU T I O N S A. System Overview Panduct ® Type FL Wiring Duct Dimensions Dimensions are shown for reference only. Dimensions are in mm (in.). Contact Panduit Customer Service at 800-777-3300 for specific dimensional needs. B1. Cable Ties Mounting Hole Dimensions For FL12X12LG-A B2. Cable Accessories 5.0 TYP [.20] 8.0 TYP [.31] 12.5 [.49] A B3. Stainless Steel Ties 25 x 25 (.98) x (.98) 24.9 (.98) 24.9 (.98) 50 x 50 (1.97) x (1.97) 50 (1.97) 50 (1.97) C L 4.0 TYP [.
PAGE 283
E L E C T R I C A L S O LU T I O N S A. System Overview Panduct Type D, G, F and FS Wiring Duct – Wirefill Capacity ® Electrical 8 10 AWG AWG Nominal Duct Size (W x H) In. 0.50 x 0.50 Nominal Area In.² 0.250 .216 .164 12 AWG .13 .141 Communication 14 AWG .152 .111 .124 16 AWG .133 .096 .111 18 AWG .118 .084 .100 22 23 23/24 24 Fiber AWG AWG AWG AWG Cable .106 .085 .330 .25 .190 .118 Cat.
PAGE 284
E L E C T R I C A L S O LU T I O N S A. System Overview Panduct ® Type MC and NNC Wiring Duct – Wirefill Capacity Electrical B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index C1.
PAGE 285
E L E C T R I C A L S O LU T I O N S A. System Overview Panduct Type NE Wiring Duct – Wirefill Capacity ® Electrical 8 10 AWG AWG 12 AWG Communication 14 AWG 16 AWG 18 AWG 22 23 23/24 24 Fiber AWG AWG AWG AWG Cable Nominal Duct Size (W x H) In. 0.50 x 0.50 Nominal Area In.² 0.250 0.50 x 1.00 0.500 5 9 14 12 10 20 16 14 27 20 17 35 25 22 34 2 1.00 x 1.00 1.000 10 18 29 25 21 40 32 28 54 40 35 70 50 44 69 4 1.00 x 1.50 1.
PAGE 286
E L E C T R I C A L S O LU T I O N S A. System Overview B1. Cable Ties Wirefill Formula General Formula Panduit Wiring Duct wirefills are calculated using the following general formula: B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection Why use a 50% Wirefill? As specified in NFPA79-2007 section 13.5.2, Percentage Fills of Raceways (Ducts), a 50% wirefill is given as the maximum wirefill capacity in all Panduit Wiring Ducts.
PAGE 287
E L E C T R I C A L S O LU T I O N S A. System Overview Panduct Wiring Duct and Raceway – Material Specifications ® B1. Cable Ties Properties Halogen-Free Modified PPO (NNC, NE) Polypropylene (FL) Units Test Method Lead-Free PVC g/cc °F 10-5 in/in/°F ASTM D 792 ASTM D 648 ASTM D 696 1.45 156 3.7 1.09 215 3.8 0.95 117 N/A (BTU-in/hr-ft²)°F ASTM C 177 1.3 1.
PAGE 288
E L E C T R I C A L S O LU T I O N S A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions Panduct ® Wiring Duct and Raceway – Color and Size Selection Duct Size WxH In. .5 x .5 .5 x 1 .5 x 2 .
PAGE 289
E L E C T R I C A L S O LU T I O N S A. System Overview Installation Tips: Application of Latex Paint on Panduct ® Wiring Duct The following is recommended to properly prepare the surface of the wiring duct/raceway and covers for the best adhesion of latex paint: 1. Clean surface with mild soap and water solution or mineral spirits with a clean lint free towel. Allow to dry. 2. Using a sanding pad (such as synthetic stripping pad or medium/fine steel wool), slightly roughen the surface to be painted. 3.
PAGE 290
E L E C T R I C A L S O LU T I O N S A. System Overview B1. Cable Ties B2. Cable Accessories Part Number System for Panduct ® PanelMax™ DIN Rail Wiring Duct DRD 22 LG 6 Type Size Color Length LG = Light Gray WH = White Ft. DRD = DIN Rail Duct Capability Height 22 = 2" Height 33 = 3" Height 44 = 4" Height B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway Part Number System for Panduct ® PanelMax™ Corner Wiring Duct CWD Type CWD = Corner Wiring Duct C3. Abrasion Protection C4.
PAGE 291
E L E C T R I C A L S O LU T I O N S A. System Overview Panduit Wiring Duct Approvals and Compliances B1. Cable Ties Logo (Symbol) Agency Complies with: Underwriters Laboratories, Inc. File No. E147128 Underwriters Laboratories, Inc. Canadian Standards Association Conformite European Logo (Symbol) Agency DIN (Deutsches Institut fur Normung), German Institute for Standardization File No. E147128 File No. 016446 Low Voltage Directive 2006/95/EEC Complies with: DIN 43 659 UL 1565 CSA C22.
PAGE 292
E L E C T R I C A L S O LU T I O N S A. System Overview Panduit Wiring Duct Approvals and Compliances (continued) B1. Cable Ties Logo (Symbol) B2. Cable Accessories Agency C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index C1.
PAGE 293
ELECTRICAL SOLUTIONS A. System Overview FIBER-DUCT ™ ROUTING SYSTEM Panduit provides leading solutions for cable routing. These routing products are compatible with our cable management solutions increasing your ability to maintain an orderly and clean work environment, implement quick and easy moves, adds, and changes and maintain the integrity of your fiber and copper cabling plant in order to maximize long-term performance. B1. Cable Ties B2. Cable Accessories B3.
PAGE 294
ELECTRICAL SOLUTIONS A. System Overview 2x2 and 4x4 Fiber-Duct ™ Routing Systems Roadmap B1. Cable Ties B2. Cable Accessories 7 B3. Stainless Steel Ties 6 11 5 C1. Wiring Duct 10 8 4 C2. Surface Raceway 3 12 9 C3. Abrasion Protection 14 C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors 2 13 1 Fiber-Duct ™ Mounting Brackets E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers FTRBE12 – Existing Threaded Rod Bracket (page C1.
PAGE 295
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties 1 2 3 FCF2X2** and FCF4X4** – Coupler Fitting (see page C1.56) FEC2X2** and FEC4X4** – End Cap Fitting (see page C1.57) FFWC2X2** and FFWC4X4** – 4-Way Cross Fitting (see page C1.57) B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct FIVRA2X2** and FIVRA4X4** – Inside Vertical Right Angle (see page C1.57) C2. Surface Raceway 5 FOVRA2X2** and FOVRA4X4** – Outside Vertical Right Angle (see page C1.57) C3.
PAGE 296
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties 2x2 and 4x4 Fiber-Duct ™ Routing Systems • Channel, covers, fittings and other non-metallic system components made from V-0 flame class rated material • Snap-on non-slip covers B2. Cable Accessories Part Number Fiber-Duct B3. Stainless Steel Ties • Compatible with Panduit® FiberRunner ® 2x2, 4x4, 6x4 and 12x4 Routing Systems ™ Part Description System Size Std. Std. Pkg. Ctn. Qty. Qty.
PAGE 297
ELECTRICAL SOLUTIONS A. System Overview Fiber-Duct ™ System Fittings (continued) Part Number FT2X2 FT4X4 Part Description System Size Std. Std. Pkg. Ctn. Qty. Qty. Horizontal Tee Fitting FT2X2YL FT4X4YL Attaches to channel to create a 90° horizontal branch from a straight horizontal run. Cover included. 2x2 1 5 4x4 1 5 Four Way Cross Fitting FFWC2X2YL FFWC2X2 FFWC4X4 FFWC4X4YL Attaches to channel to create a horizontal four way cross intersection. Cover included.
PAGE 298
ELECTRICAL SOLUTIONS A. System Overview Fiber-Duct ™ Spillouts B1. Cable Ties Part Number B2. Cable Accessories Part Description Std. Std. Pkg. Ctn. Qty. Qty. 2x2 Vertical Tee FVTHD2X2YL B3. Stainless Steel Ties FVTHD2X2 C1. Wiring Duct C2. Surface Raceway System Size Attaches to 2x2 channel to create a 90° vertical drop from a horizontal run. Hinged door included. Accepts channel cover in conjunction with channel. Use QuikLock ™ Coupler FBC2X2YL with HS2X2YL6 or H2X2YL6 channels.
PAGE 299
ELECTRICAL SOLUTIONS A. System Overview Fiber-Duct ™ Bend Radius Control Trumpets • Provide method to transition cabling into rack system •Maintain 1 inch (25.4mm) bend radius control Part Number TRC2BL Part Description Bend radius control trumpet for exiting at the sidewall of 2" wall heights of type G, FS, E, or S Fiber-Duct ™ Channels. TRC4BL Bend radius control trumpet for exiting at the sidewall of 4" wall heights of type G, FS, E, or S Fiber-Duct ™ Channels. TRC2BL Std. Std. Pkg. Ctn.
PAGE 300
ELECTRICAL SOLUTIONS A. System Overview Fiber-Duct ™ Mounting Brackets B1. Cable Ties Part Number B2. Cable Accessories FTRBE12, FTRBE58 FTRBE12M FTRBE12 FTRBE58 FTRBE12M FTRBN12, FTRBN58 FTRBN12M C2. Surface Raceway FTRBN58 FTRBN12M FUSB FUSB 1/2" 1 10 5/8" 1 10 12mm 1 10 1/2" 1 10 5/8" 1 10 12mm 1 10 — 1 10 — 1 10 — 1 10 — 1 10 — 1 10 System Used for supporting the 2x2 and 4x4 Fiber-Duct ™ Systems from new threaded rod installations.
PAGE 301
ELECTRICAL SOLUTIONS A. System Overview Fiber-Duct ™ Mounting Brackets (continued) Part Number Part Description For Std. Std. Threaded Pkg. Ctn. Rod Size Qty. Qty. Two-Piece Ladder Rack Bracket for Attaching Threaded Rod to 1 1/2" – 2" Ladder Rack F2PCLB12 F2PCLB58 F2PCLB12 F2PCLB58 Two-piece bracket attaches to 3/8" (9.5mm) wide x 1 1/2" (38.1mm) or 3/8" (9.5mm) wide x 2" (50.8mm) ladder rack rail.
PAGE 302
ELECTRICAL SOLUTIONS A. System Overview 2x2 and 4x4 Fiber-Duct ™ Routing Systems Cable Fills for 2x2 and 4x4 Fiber-Duct ™ Cable Routing Systems B1. Cable Ties The maximum amounts may vary according to the cable fill installation methods, straightness of cables, etc. B2. Cable Accessories 2x2 Fiber-Duct ™ Cable Routing System B3. Stainless Steel Ties Fill/Pile Up 2.25" (57.1mm) A = 3.5 in. (2258mm2) 2 Diameter 2.0mm .079" Diameter 3.0mm .118" 3.5 449 288 128 42 20 29 3.
PAGE 303
ELECTRICAL SOLUTIONS A. System Overview NOTES B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S.
PAGE 304
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties PAN-WAY ® NON-METALLIC SURFACE RACEWAY Pan-Way ® Non-Metallic Surface Raceways provide maximum flexibility for routing, protecting, concealing and terminating high performance copper, voice, video, fiber optic and power cabling. Panduit surface raceways are designed with attention to function and aesthetics to blend with any décor.
PAGE 305
ELECTRICAL SOLUTIONS A. System Overview PAN-WAY ® TG-70 NON-METALLIC SURFACE RACEWAY ® Pan-Way TG-70 Non-Metallic Surface Raceway is a multi-channel raceway, which provides a solution for routing copper, fiber optic, and/or power cabling when maximum cable capacity is required. B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties • Large raceway channel provides maximum capacity • Fittings maintain 40mm (1.
PAGE 306
ELECTRICAL SOLUTIONS A. System Overview TG-70 Raceway Roadmap B1. Cable Ties B2. Cable Accessories T B3. Stainless Steel Ties See exploded view 2 pg. C2.4 C1. Wiring Duct See exploded view 4 pg. C2.5 S N C2. Surface Raceway G 1 K D1. Terminals L H C3. Abrasion Protection C4. Cable Management D Q A 2 B M O See exploded view 3 pg. C2.5 C D E1. Labeling Systems E E2. Labels F E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F.
PAGE 307
ELECTRICAL SOLUTIONS A. System Overview 1 1 TG-70** – TG-70 Raceway Base and Cover (page C2.6) TGDW – TG-70 Raceway Divider Wall (page C2.6) 2 LD2P10** – Raceway (page C2.57) A TGEC** – TG-70 End Cap (page C2.7) J K L C D E F G H T70PG** – Single Gang Rectangular Electrical/ Communication Snap-On Faceplate (page C2.35) T70FV2** – Vertical Sloped Communication Snap-On Faceplate (page C2.34) T70CC** – T-70 Cover Couplers (page C2.7) TGTD — TG Tee Divider (page C2.
PAGE 308
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties TG-70 Configurations Exploded View 1 Components Required B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct See page A. T70FV2 = Vertical sloped communication snap-on faceplate. B. Panduit ® Mini-Com ® Modules. C. T70PG = Single gang rectangular electrical/communication snap-on faceplate. C2.35 D. ERU20 = 20 A rectangular electrical outlet (screws included). C2.43 E.
PAGE 309
ELECTRICAL SOLUTIONS A. System Overview TG-70 Configurations (continued) Exploded View 3 B1. Cable Ties Components Required See page A. UIT70FH4 = Ultimate ID ® Sloped Horizontal Snap-On Faceplate – 4-port. — B. Mini-Com ® Modules. — B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway B C3. Abrasion Protection A C4. Cable Management Exploded View 4 Components Required D1. Terminals See page A.
PAGE 310
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Way ® TG-70 Surface Raceway System • UL and CSA rated 600 V; meets UL 5A and CSA C22.2 No. 62.1-03 standards; FT4 rated • Large cable capacity with aesthetically pleasing design • Tamper resistant • Compatible with NEMA standard faceplates or Pan-Way ® Classic Series Snap-On Faceplates • Transitions to Panduit T-45 and LD profile raceway • Supplied with pre-punched mounting holes B2. Cable Accessories B3.
PAGE 311
ELECTRICAL SOLUTIONS A. System Overview Pan-Way TG-70 Raceway Fittings ® • TG-70 fittings are designed to exceed the TIA/EIA-568-B and 569-B required minimum bend radius for high performance copper and fiber optic cabling systems Part Number T70CCIW-X T70CC TGRA TGSIC TGSOC TGTD TG70BC TG70BCIW-X Base coupler fitting. Each piece includes two base coupler halves for joining sections of TG-70 base together. Std. Ctn. Qty. 100 Off White 10 — B3. Stainless Steel Ties Right angle fitting.
PAGE 312
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Way ® TG-70 Raceway Accessories • TG-70 accessories consist of device mounting brackets, standard faceplate brackets for data, wire retainers and fiber spool brackets; the three-sided hanging box is used to mount NEMA standard single gang outlet and communications devices B2. Cable Accessories Part Number T70DB-X Part Description Device mounting bracket.
PAGE 313
ELECTRICAL SOLUTIONS A. System Overview Cable Fill Capacities for TG-70 Raceway This information is to be used as a guide in selecting the proper size raceway. The maximum amounts may vary according to the cable installation methods, straightness of cables, etc. B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties A = 10.09 in.2 A = 10.68 in.2 A = 10.85 in.2 Cable fill #1: With data only using screw-on faceplates and devices.
PAGE 314
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index C2.
PAGE 315
ELECTRICAL SOLUTIONS A. System Overview PAN-WAY ® T-70 AND TWIN-70 NON-METALLIC SURFACE RACEWAY Pan-Way ® T-70 and Twin-70 Non-Metallic Surface Raceways are multi-channel raceways which provide solutions for routing copper, fiber optic, and/or power cabling along fixed perimeter walls. T-70 features the Workstation Outlet Center™ Offset Box which provides an offset solution to maximize channel capacity and outlet density.
PAGE 316
ELECTRICAL SOLUTIONS A. System Overview T-70 Raceway Roadmap B1. Cable Ties M B2. Cable Accessories G B3. Stainless Steel Ties J See exploded view 4 pg. C2.15 See exploded view 1 pg. C2.14 K C1. Wiring Duct S C2. Surface Raceway B E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index C2.12 P D J A F 2 R See exploded view 2 pg. C2.14 L S T J N D3. Grounding Connectors Q C D1. Terminals D2.
PAGE 317
ELECTRICAL SOLUTIONS A. System Overview 1 T70B**, T70C** – T-70 Base and Cover (page C2.18) 1 T70DW – T-70 Divider Wall (page C2.18) J T70PG** – Single Gang Rectangular Electrical/ Communication Snap-On Faceplate (page C2.35) B1. Cable Ties UIT70FH2** – Ultimate ID Sloped Horizontal Snap-On Faceplate ® K B2. Cable Accessories B3. Stainless Steel Ties 2 A LD2P10** – LD2P10 Raceway (page C2.57) L T70EC** – T-70 End Cap Fitting (page C2.19) M B C T70RA** – T-70 Right Angle Fitting (page C2.
PAGE 318
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties T-70 Configurations Exploded View 1 Components Required B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct A. T70WC2 = T-70 Workstation Outlet Center Offset Box for snap-on faceplates. C2.19 B. ERU20 = 20 A rectangular electrical outlet (screws included). C2.43 C. Mini-Com Modules. D. T70PG = Single gang rectangular electrical/ communication snap-on faceplate. E.
PAGE 319
ELECTRICAL SOLUTIONS A. System Overview T-70 Configurations (continued) Exploded View 3 B1. Cable Ties Components Required See page A. UIT70FH2 = Ultimate ID Sloped Horizontal Snap-On Faceplate – 2-port. — B. Mini-Com ® Modules. — ® B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection B C4. Cable Management A D1. Terminals Exploded View 4 Components Required D2. Power Connectors See page A.
PAGE 320
ELECTRICAL SOLUTIONS A. System Overview Twin-70 Raceway Roadmap B1. Cable Ties R B2. Cable Accessories A B3. Stainless Steel Ties C1. Wiring Duct F A B E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index C2.16 S Q 3 P K 2 G O D1. Terminals D3. Grounding Connectors M 1 C3. Abrasion Protection D2. Power Connectors L J C2. Surface Raceway C4.
PAGE 321
ELECTRICAL SOLUTIONS A. System Overview 1 T702B**, T70C** – Twin-70 Raceway Base and Cover (page C2.20) 2 T45B**, T45C** – T-45 Raceway Base and Cover (page C2.30) J B T702T** – Twin-70 Tee Fitting (page C2.21) T70B**, T70C** – T-70 Raceway Base and Cover (page C2.18) L A T702IC** – Twin-70 Inside Corner Fitting (page C2.21) B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway T702EC** – Twin-70 End Cap Fitting (page C2.21) T702TRL** – Twin-70 Transition Fitting (page C2.21) B1.
PAGE 322
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Way ® T-70 Surface Raceway System • Compatible with NEMA standard 70mm faceplates or Pan-Way ® Classic Series Snap-On Faceplates • Transitions to Panduit T-45 and LD profile raceway • Supplied with pre-punched mounting holes • UL and CSA rated 600 V; meets UL 5A and CSA C22.2 No. 62.1-03 standards; FT4 rated • Large cable capacity with aesthetically pleasing design • Tamper resistant B2. Cable Accessories B3.
PAGE 323
ELECTRICAL SOLUTIONS A. System Overview Pan-Way T-70 Raceway Fittings (continued) ® Part Number T70OCIW T70OC T70TD T70EE T70T Std. Std. Pkg. Ctn. Part Description Color‡ Qty. Qty. Outside corner fitting. Used to join sections of T-70 raceway Off 1 10 at outside corners. White T70TIW Tee fitting. Used to join sections of T-70 raceway at tee intersections. Off White 1 10 T70TD T-70 tee fitting divider. Separates power and data within tee fitting. Replaces T70TDB, T70TDC, and T70TDT.
PAGE 324
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Pan-Way ® Twin-70 Surface Raceway System • UL and CSA rated 600 V; meets UL 5A and CSA C22.2 No. 62.
PAGE 325
ELECTRICAL SOLUTIONS A. System Overview Pan-Way Twin-70 Raceway Fittings ® • Twin-70 fittings are designed to maintain the TIA/EIA-568-B and 569-B required minimum bend radius for high performance copper and fiber optic cabling systems Part Number T70CCIW-X T70CC Part Description Cover coupler fitting. Used to join sections of cover together. T702BC T702BCIW-X Base coupler fitting. Used for joining sections of Twin-70 base together. T702RA T702TR T702TRI Off White 10 — Right angle fitting.
PAGE 326
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Way ® T-70 and Twin-70 Raceway Accessories • T-70 and Twin-70 raceway accessories consist of device mounting brackets, snap-on device brackets, hanging boxes and 3-sided hanging boxes used to mount NEMA standard single gang electrical outlets and/or communication devices B2. Cable Accessories B3. Stainless Steel Ties T70DB-X Part Number T70DB-X Part Description Device mounting bracket.
PAGE 327
ELECTRICAL SOLUTIONS A. System Overview Cable Fill Capacities for T-70 Raceway This information is to be used as a guide in selecting the proper size raceway. The maximum amounts may vary according to the cable installation methods, straightness of cables, etc. B1. Cable Ties B2. Cable Accessories A = 5.15 in.2 A = .86 in.2 Cable fill #1: Raceway with no devices. B3. Stainless Steel Ties b a C1. Wiring Duct A = 3.67 in.2 A = 1.72 in.
PAGE 328
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Cable Fill Capacities for Twin-70 Raceway This information is to be used as a guide in selecting the proper size raceway. The maximum amounts may vary according to the cable installation methods, straightness of cables, etc. B2. Cable Accessories a B3. Stainless Steel Ties A = 2.05 in.2 b A = 1.43 in.2 Cable fill #1: Power and data with no devices. C1. Wiring Duct A = 3.11 in.2 A = 4.59 in.2 Cable fill #2: One Twin-70 channel with no devices.
PAGE 329
ELECTRICAL SOLUTIONS A. System Overview PAN-WAY ® T-45 NON-METALLIC SURFACE RACEWAY Pan-Way ® T-45 Non-Metallic Surface Raceway is a multi-channel raceway which provides a solution for routing copper, fiber optic, and/or power cabling along fixed perimeter walls.T-45 surface raceway terminates using the T-45 hinged data and power brackets,T-45 offset box, and select Pan-Way ® Surface Mount Outlet Boxes. B1. Cable Ties B2. Cable Accessories B3.
PAGE 330
ELECTRICAL SOLUTIONS A. System Overview T-45 Raceway Roadmap B1. Cable Ties J B2. Cable Accessories S H See exploded view 4 pg. C2.29 R B3. Stainless Steel Ties L 1 2 C1. Wiring Duct M K C2. Surface Raceway R N R O Q G C3. Abrasion Protection A B C4. Cable Management C D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index C2.26 P F D1. Terminals D2.
PAGE 331
ELECTRICAL SOLUTIONS A. System Overview 1 1 2 A B C D T45B**, T45C** – T-45 Raceway Base and Cover (page C2.30) J T45DW** – T-45 Divider Wall (page C2.30) K T45IC** – T-45 Inside Corner Fitting (page C2.31) L T45WC** – T-45 Offset Box for Screw-On Faceplates/Receptacles (page C2.31) LDPH10** – LDPH Raceway (page C2.59) T45EC** – T-45 End Cap Fitting (page C2.31) T45T** and T45TD – T-45 Tee Fitting and Divider (page C2.
PAGE 332
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties T-45 Configurations Exploded View 1 Components Required B2. Cable Accessories A. T45HDB = T-45 snap-on hinged data bracket. B. Mini-Com ® Modules. See page C2.31 — B3. Stainless Steel Ties C1. Wiring Duct B C2. Surface Raceway C3. Abrasion Protection A C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors Exploded View 2 Components Required See page A.
PAGE 333
ELECTRICAL SOLUTIONS A. System Overview T-45 Configurations (continued) B1. Cable Ties Exploded View 3 Components Required See page A. UIT70FH4 = Ultimate ID Sloped Horizontal Faceplates – 4-Port. B. Mini-Com ® Modules. C. ® B2. Cable Accessories — — T45WC2 = T-45 offset box for snap-on faceplates. C2.31 B3. Stainless Steel Ties C1. Wiring Duct A C2. Surface Raceway B C C3. Abrasion Protection C4. Cable Management Exploded View 4 Components Required D1. Terminals See page A.
PAGE 334
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Way ® T-45 Surface Raceway System • Supplied with pre-punched mounting holes • Tamper resistant • Terminates using the T-45 hinged data or power brackets, offset box, or surface mount outlet box solutions • UL and CSA rated 600 V; meets UL 5A and CSA C22.2 No. 62.1-03 standards; FT4 rated • Hinged cover allows easy access from either side • Optional factory applied adhesive backing speeds installation B2. Cable Accessories B3.
PAGE 335
ELECTRICAL SOLUTIONS A. System Overview Pan-Way ® T-45 Raceway Fittings • T-45 fittings are designed to maintain the TIA/EIA-568-B and 569-B required minimum bend radius for high performance copper and fiber optic cabling systems T45CC T45IC T45T T45EC T45RLD T45HDB T45HEGB Std. Pkg. Color‡ Qty. Off 10 White Std. Ctn. Qty. 100 Part Number T45CCIW-X Part Description Cover coupler fitting. Used to join two pieces of T-45 cover together. T45RAIW Right angle fitting.
PAGE 336
ELECTRICAL SOLUTIONS A. System Overview Cable Fill Capacities for T-45 Raceway This information is to be used as a guide in selecting the proper size raceway. The maximum amounts may vary according to the cable installation methods, straightness of cables, etc. B1. Cable Ties B2. Cable Accessories A = 0.44 in.2 A = 2.13 in.2 A = 1.72 in.2 Cable fill #1: T-45 with no devices. Cable fill #2: T-45 with wire retainer. B = 1.20 in.2 Cable fill #3: Power and data using a wire retainer and divider wall.
PAGE 337
ELECTRICAL SOLUTIONS A. System Overview PAN-WAY ® SNAP-ON FACEPLATES AND SURFACE MOUNT OUTLET BOXES Pan-Way ® Snap-On Faceplates are designed for use with Panduit surface raceway systems and install faster than conventional screw-on faceplates, reducing labor costs and providing a more aesthetic appearance. Pan-Way ® Snap-On Communication Faceplates are available in vertical and horizontal orientation and accept Panduit® Mini-Com® Copper and Fiber Optic Modules.
PAGE 338
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Way ® Fast-Snap™ Surface Mount Outlet Boxes • JB1FS and JBP2FS assemble without the use of screws for faster installation • JB1FS and JBP2FS are supplied with adhesive backing to speed installation B2. Cable Accessories B3. Stainless Steel Ties Std. Std. Pkg. Ctn. Part Description Color‡ Qty. Qty. Single gang two-piece snap together outlet box with adhesive Off 1 10 backing. Box accepts Pan-Way ® Snap-On Faceplates.
PAGE 339
ELECTRICAL SOLUTIONS Pan-Way Classic Series Snap-On Faceplates for Use with Panduit Mini-Com ® Inserts ® • Single gang vertical or horizontal sloped communication faceplates accept one or two Panduit ® Mini-Com ® Inserts T70BH2 T70B2 T70B1 B1. Cable Ties • Can be used with Pan-Way ® Cove, TG-70, T-70, Twin-70, T-45 Raceway Systems, Fast-Snap™ Outlet Boxes and Pan-Pole ™ Aluminum Outlet Pole Part Number Part Description T70BH1IW Snap-on horizontal communication faceplate.
PAGE 340
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Panduit ® NetKey ® Snap-On Sloped Keystone Faceplates B3. Stainless Steel Ties C1. Wiring Duct NK2HSRF NK4HSRF C2. Surface Raceway C3. Abrasion Protection NK4VSRF Part Number Part Description NK2HSRFIW Snap-on 2-position sloped horizontal faceplate accepts any Panduit ® NetKey ® Module. Compatible with Panduit ® NetKey ® Outlet Boxes, Surface Raceway Systems, and Pan-Pole ™ Outlet Poles.
PAGE 341
ELECTRICAL SOLUTIONS A. System Overview Pan-Way Snap-On Faceplates for SYSTIMAX* Communication Modules ® • Can be used with Pan-Way ® Cove, TG-70, T70, Twin-70, T-45 Raceway Systems, Fast-Snap ™ Outlet Boxes, and Pan-Pole ™ Aluminum Outlet Poles Part Number T70L2IW T70L2 T70L4IW T70L4 T70LV2IW Part Description Snap-on horizontal communication faceplate designed to accept two SYSTIMAX* communication modules (not included).
PAGE 342
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Way ® Snap-On Faceplates for Nordx/CDT* Communication Modules • Can be used with Pan-Way ® Cove, TG-70, T70, Twin-70, T-45 Raceway Systems, Fast-Snap ™ Outlet Boxes, and Pan-Pole ™ Aluminum Outlet Poles B2. Cable Accessories B3. Stainless Steel Ties C2. Surface Raceway Part Description Snap-on horizontal communication faceplate designed to accept two Nordx/CDT* communication modules (not included).
PAGE 343
ELECTRICAL SOLUTIONS A.
PAGE 344
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Way ® Power Rated Surface Mount Outlet Boxes • JBP1FS and JBP2FS assemble without the use of screws for faster installation • JBP1FS and JBP2FS are supplied with adhesive backing to speed installation B2. Cable Accessories B3. Stainless Steel Ties Part Number JBP1IW JBP1 JBP2 C1. Wiring Duct C2. Surface Raceway JBP1D JBP2D JBP1E D1. Terminals Double gang two-piece screw together outlet box.
PAGE 345
A. System Overview Pan-Way Power Rated Surface Mount Outlet Boxes (continued) ® B1. Cable Ties Part Number JBD1 JBD1 JBD2 JBP2FS JBP2S Double gang two-piece screw together divided outlet box. Box accepts Pan-Way ® Screw-On Faceplates or any NEMA standard double gang faceplate. For use with Pan-Way ® T-45 or LD profile raceway. 5.05"L x 5.05"W x 1.62"H (128.2mm x 128.2mm x 41.1mm). Breakouts for 1/2" or 3/4" diameter conduit. Off White JBD2 Double gang pass-through divider.
PAGE 346
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Way ® Classic Series Faceplates for Power and Communication Applications • For use with JBP2S or JBP2D outlet boxes B2. Cable Accessories B3. Stainless Steel Ties FP2DC FP2RC Part Number FP2DCIW Part Description Covers one NEMA standard 106 duplex electrical receptacle and accepts Panduit ® Mini-Com ® 1/2-size, 1/3-size, and 2/3size Inserts. For product application, please reference LD profile raceway section.
PAGE 347
ELECTRICAL SOLUTIONS A. System Overview Pan-Way Stainless Steel Faceplates ® Part Number WPS-20 Part Description Stainless steel single gang 106 duplex screw-on faceplate. Covers one NEMA standard 106 duplex electrical outlet or one standard 106 communication module frame. Stainless steel double gang 106 duplex screw-on faceplate. Covers two NEMA standard 106 duplex electrical outlets or two standard 106 communication module frames. WPS-202 WPS-202 WPS-20 Std. Std. Pkg. Ctn. Qty. Qty. 1 10 1 10 C1.
PAGE 348
ELECTRICAL SOLUTIONS A. System Overview Selection Chart for using Pan-Way ® Surface Raceway with Pan-Way ® Surface Mount Outlet Boxes B1. Cable Ties B2. Cable Accessories How 1. 2. 3. 4. to use this chart: Locate the desired Pan-Way ® Raceway in the left column. Locate the desired Pan-Way ® Outlet Box in the top row. Match up the raceway with the outlet box to see if they are compatible (Y = yes, N = no). Select correct surface mount outlet box. B3.
PAGE 349
ELECTRICAL SOLUTIONS A. System Overview PAN-WAY ® LD PROFILE NON-METALLIC SURFACE RACEWAY B1. Cable Ties Pan-Way ® LD Profile Raceway is available in single and multi-channel styles to provide a solution for routing copper, fiber optic, and power cabling along fixed perimeter walls. B2. Cable Accessories B3.
PAGE 350
ELECTRICAL SOLUTIONS A. System Overview LD2P10 Profile Raceway Roadmap B1. Cable Ties R B2. Cable Accessories B3. Stainless Steel Ties E 1 G C1. Wiring Duct H C2. Surface Raceway See exploded view 3 pg. C2.49 K J B C3. Abrasion Protection A O C4. Cable Management See exploded view 2 pg. C2.48 F D1. Terminals E D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5.
PAGE 351
ELECTRICAL SOLUTIONS A. System Overview 1 A LD2P10** – Raceway (page C2.57 K ECFX10** – Power Rated End Cap Fitting (page C2.57) G H J CFX10** – Power Rated Coupler Fitting (page C2.57) JBP1D** – Single Gang Two-Piece Deep Box (page C2.40) ERU20** – 20 A Rectangular Electrical Outlet (page C2.43) JBD2 – Double Gang Pass Through and Divider for LD2P10 Raceway (page C2.41) C3. Abrasion Protection D1. Terminals D2. Power Connectors OCFX10** – 1 Inch Bend Radius Outside Corner Fitting (page C2.
PAGE 352
ELECTRICAL SOLUTIONS A. System Overview LD2P10 Configurations B1. Cable Ties Exploded View 1 Components Required B2. Cable Accessories B3. Stainless Steel Ties See page — A. Panduit Mini-Com Modules. B. FP2RC = Double gang rectangular electrical and two communication insert faceplate (screws included). C2.42 C. ERU20 = 20 A rectangular electrical outlet (screws included). C2.43 D. JBP2S = Power rated double gang three-piece divided box (screws included). C2.41 ® ® C1. Wiring Duct C2.
PAGE 353
ELECTRICAL SOLUTIONS A. System Overview LD2P10 Configurations (continued) Exploded View 3 B1. Cable Ties Components Required See page A. UICFPSE2 = Ultimate ID Two-Position Executive Sloped Faceplate. — B. Mini-Com ® Modules. — C. JBP1D = Power rated single gang two-piece deep box (screws included). C2.40 D. JBD1 = Single gang pass-through divider for LD2P10 raceway. C2.41 ® B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C C2. Surface Raceway A D C3.
PAGE 354
ELECTRICAL SOLUTIONS A. System Overview LD Profile Raceway Roadmap B1. Cable Ties O B2. Cable Accessories B3. Stainless Steel Ties See exploded view 2 pg. C2.53 C1. Wiring Duct H C2. Surface Raceway G 1 B C3. Abrasion Protection A C4. Cable Management J C F 2 D1. Terminals D2. Power Connectors D D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index C2.
PAGE 355
ELECTRICAL SOLUTIONS A. System Overview 1 LD10** – Raceway (page C2.58) G CF10** – Coupler Fitting (page C2.61) B1. Cable Ties B2. Cable Accessories 2 LD5** – Raceway (page C2.58) H ICF10** – Inside Corner Fitting (page C2.61) B3. Stainless Steel Ties C1. Wiring Duct A ECF10** – End Cap Fitting (page C2.61) J JBP2FS** – Fast-Snap™ Double Gang Power Rated Surface Mount Outlet Box (page C2.34) C2. Surface Raceway C3. Abrasion Protection B TF10** – Tee Fitting (page C2.
PAGE 356
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties LD Configurations Exploded View 1 Components Required See page A. CPG = Single gang rectangular screw-on faceplate (screws included). B. CFG2 = Mini-Com Module Frame – 2-port. — C. Mini-Com ® Modules. — D. JBX3510 = Single gang two-piece snap together box. C2.42 ® C2.39 C1. Wiring Duct C2. Surface Raceway D C3. Abrasion Protection B C4. Cable Management D1. Terminals D2.
PAGE 357
ELECTRICAL SOLUTIONS A. System Overview LD Configurations (continued) B1. Cable Ties Exploded View 2 Components Required See page A. T70FV2 = Snap-on vertical sloped communication faceplate – 2-port. B. Panduit ® Mini-Com ® Modules. C. JBP2FS = Fast-Snap ™ double gang power rated surface mount outlet box. B2. Cable Accessories C2.34 — C2.34 B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C B A C3. Abrasion Protection C4. Cable Management D1. Terminals D2.
PAGE 358
ELECTRICAL SOLUTIONS A. System Overview LDPH Profile Raceway Roadmap B1. Cable Ties O B2. Cable Accessories B3. Stainless Steel Ties See exploded view 2 pg. C2.56 C1. Wiring Duct K C2. Surface Raceway C3. Abrasion Protection 1 H B A F D C4. Cable Management C L G E 2 M F D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index C2.
PAGE 359
ELECTRICAL SOLUTIONS A. System Overview 1 LDPH10** – Raceway (page C2.59) G OCFC10** – Power Rated Outside Corner Fitting (page C2.63) B1. Cable Ties B2. Cable Accessories 2 LDPH5** – Raceway (page C2.59) H CFX10** – Power Rated/1 Inch Bend Radius Coupler Fitting (page C2.62) B3. Stainless Steel Ties C1. Wiring Duct A B ECFX10** – Power Rated/1 Inch Bend Radius End Cap Fitting (page C2.62) J TFX10** – Power Rated Tee Fitting (page C2.
PAGE 360
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties LDPH Configurations Exploded View 1 Components Required B2. Cable Accessories B3. Stainless Steel Ties See page A. CPG = Single gang rectangular screw-on faceplate (screws included). C2.42 B. ERU20 = 20 A rectangular electrical outlet (screws included). C2.43 C. JBP1 = Power rated single gang two-piece box (screws included). C2.40 C1. Wiring Duct C C2. Surface Raceway C3. Abrasion Protection A C4. Cable Management B D1.
PAGE 361
ELECTRICAL SOLUTIONS A. System Overview Pan-Way Type LD2P10 Multi-Channel Surface Raceway System ® • Factory applied adhesive backing speeds installation • Terminates using JBP1D, JBP2D, JBP2FS or JBP2S surface mount outlet box solutions • UL and CSA rated 600 V; meets UL 5A and CSA C22.2 No. 62.1-03 standards; FT4 rated • Routes power and data together • One-piece hinged design allows cables to be laid in • Tamper resistant B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1.
PAGE 362
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Way ® LD Surface Raceway System • FT4 rated • Terminates using surface mount outlet box solutions or Panduit ® Mini-Com ® Surface Mount Boxes • For routing data and low voltage cabling • One-piece hinged design allows cables to be laid in • Factory applied adhesive backing speeds installation B2. Cable Accessories B3. Stainless Steel Ties LD3 Internal Area = .21 Sq. In. C1. Wiring Duct Part Number C2.
PAGE 363
ELECTRICAL SOLUTIONS A. System Overview Pan-Way LDPH Surface Raceway System ® • Factory applied adhesive backing speeds installation • Terminates using surface mount outlet box solutions or Panduit ® Mini-Com ® Surface Mount Boxes • UL and CSA rated 600 V; meets UL 5A and CSA C22.2 No. 62.1-03 standards; FT4 rated • Two-piece hinged design allows cables to be laid in • Tamper resistant B1. Cable Ties B2. Cable Accessories 22.0 .55" .41" .75" 1.02" LDPH3 Internal Area = .17 Sq. In.
PAGE 364
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Pan-Way ® LDS Surface Raceway System • LDS raceway requires screw mounting using the LMD mounting straps for power cabling installations • Terminates using surface mount outlet box solutions or Panduit ® Mini-Com ® Surface Mount Boxes • UL and CSA rated 600 V; meets UL 5A and CSA C22.2 No. 62.
PAGE 365
ELECTRICAL SOLUTIONS A. System Overview Standard Fittings for Low Voltage Applications B1. Cable Ties CF ICF TF CRFC FBA RAF OCF ECF DCF RF Std. Pkg. Color‡ Qty. Off 20 White Part Number CF3IW-E Part Description Coupler fitting for use with LD3 raceway. CF5IW-E Coupler fitting for use with LD5 raceway. Off White 20 CF10IW-X Coupler fitting for use with LD10 raceway. Off White 10 RAF3IW-E Right angle fitting for use with LD3 raceway.
PAGE 366
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties One Inch Bend Radius Fittings for TIA/EIA Compliance • 1 inch bend radius fittings are designed to maintain the TIA/EIA-568-B and 569-B required minimum bend radius for high performance copper and fiber optic cabling systems B2. Cable Accessories B3. Stainless Steel Ties CFX C2. Surface Raceway Part Number CFX3IW-X Part Description Coupler fitting for use with LD3, LDPH3, and LDS3 raceway.
PAGE 367
ELECTRICAL SOLUTIONS A. System Overview Power Rated Fittings for Power to 600 V – LDPH/LDS/LD2P Raceway Only CFX RAFX Part Number CFX3IW-X Part Description Coupler fitting for use with LD3, LDPH3, and LDS3 raceway. CFX5IW-X Coupler fitting for use with LD5, LDPH5, and LDS5 raceway. Off White 10 CFX10IW-X Coupler fitting for use with LD10, LDPH10, and LD2P10 raceway. Off White 10 RAFX3IW-X Right angle fitting for use with LDPH3 and LDS3 raceway.
PAGE 368
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Raceway Adapters for LD Raceway • Fit into universal breakout of DCEFX or RAEFX fittings • For use with types LD3, LDPH3, LDS3, LD5, LDPH5 and LDS5 raceway B2. Cable Accessories Std. Std. Pkg. Ctn. Color‡ Qty. Qty. Off 10 50 White Part Number Part Description Adapter fits into universal breakout of DCEFX or RAEFX CA3IW-X fittings. For use LD3, LDPH3, and LDS3 raceway. CA5IW-X B3.
PAGE 369
ELECTRICAL SOLUTIONS A. System Overview Floor Guard • Accessory to route cables over carpet, concrete, or tile to prevent tripping • Flexible vinyl material can be easily cut to specific lengths FG1 FG3 FG5 • Cables route through underside of product B1. Cable Ties Part Number FG1EI5.0-A Part Description Flexible vinyl material used to route cabling over carpet, tile, and concrete. Product available in 5' strips. Std. Pkg. Color‡ Qty. Electric 5 Ivory FG1EI50.
PAGE 370
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Foam Tape • Acrylic foam tape – Recommended for high temperature and outdoor applications (180°F) and exposure to UV light B2. Cable Accessories • Rubber foam tape – Excellent quick tack designed for long term shear loads in indoor applications up to 120°F Part Number Part Description Color Std. Std. Pkg. Ctn. Qty. Qty. 1/32" Thick White Acrylic Adhesive B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3.
PAGE 371
ELECTRICAL SOLUTIONS A. System Overview PAN-WAY ® COVE RACEWAY Pan-Way ® Cove Raceway is a full line of NEC and TIA/EIA compliant raceway, which has the appearance of architectural molding; that allows you to route, conceal, protect and terminate copper, voice, video, fiber optic or power cabling.This offering adds elegance to any room or work area by softening the horizontal angles between the wall and ceiling or the vertical angles between two walls. B1. Cable Ties B2. Cable Accessories B3.
PAGE 372
ELECTRICAL SOLUTIONS A. System Overview Cove Raceway Roadmap B1. Cable Ties D B2. Cable Accessories See exploded view 3 pg. C2.71 B3. Stainless Steel Ties G 1 T U U V C1. Wiring Duct L B F C2. Surface Raceway N M O See exploded view 4 pg. C2.71 A 2 C3. Abrasion Protection 3 C4. Cable Management H C D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5.
PAGE 373
ELECTRICAL SOLUTIONS A. System Overview H JBP2FS** – Fast-Snap™ Double Gang Power Rated Surface Mount Outlet Box (page C2.34) B1. Cable Ties WCM35DW – Cove Raceway Divider Wall (page C2.72) J UIT70FV4** – Ultimate ID ® Sloped Vertical Snap-On Faceplate B2. Cable Accessories 2 LDPH10** – LDPH10 Raceway (page C2.59) K T70PG** – Single Gang Rectangular Electrical/Communication Snap-On Faceplate (page C2.35) B3. Stainless Steel Ties 3 T45B**, T45C** – T-45 Raceway Base and Cover (page C2.
PAGE 374
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Cove Configurations Exploded View 1 Components Required B2. Cable Accessories B3. Stainless Steel Ties A. See page WCM35TR10 = Cove raceway low profile transition fitting for LD/LDP10 raceway. C2.73 B. JBP1 = Power rated single gang two-piece box. C2.40 C. ERU20 = 20 A rectangular electrical outlet (screws included). C2.43 D. CPG = Screw-on single gang rectangular faceplate. C2.42 A C1. Wiring Duct C2. Surface Raceway C C3.
PAGE 375
ELECTRICAL SOLUTIONS A. System Overview Cove Configurations (continued) Exploded View 3 B1. Cable Ties Components Required See page A. WCM35DBF = Cove raceway device box and faceplate adapter. C2.73 B. FP2RC = Pan-Way ® Classic Series Faceplates for power and communication. C2.42 C. Mini-Com ® Modules. D. ERU20 = 20 A rectangular electrical outlet (screws included). B2. Cable Accessories B3. Stainless Steel Ties — C2.43 A C1. Wiring Duct D C2. Surface Raceway C3.
PAGE 376
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pan-Way ® Cove Raceway System • UL and CSA rated 600 V; meets UL 5A and CSA C22.2 No. 62.1-03 standards; FT4 rated • Bend radius control is maintained throughout the entire cove raceway system as required by TIA/EIA-568-B and 569-B B2. Cable Accessories • • • • Tamper resistant Transitions to Panduit T-70, T-45, and LD profile raceway Cove raceway and fittings may be painted to blend with any decor Supplied with pre-punched mounting holes 3.
PAGE 377
ELECTRICAL SOLUTIONS A. System Overview Pan-Way Cove Raceway Fittings ® • Cove raceway fittings are designed to maintain the TIA/EIA-568-B and 569-B required minimum bend radius for high performance copper and fiber optic cabling systems Part Number Part Description WCM35CCIW-X Cover coupler fittings. Used to join two pieces of cove raceway cover together. WCM35CC WCM35OC WCM35TR WCM35TR10 WCM35DBF Std. Ctn. Qty. 100 B2. Cable Accessories B3.
PAGE 378
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Cable Fill Capacities for Cove Raceway This information is to be used as a guide in selecting the proper size raceway. The maximum amounts may vary according to the cable installation methods, straightness of cables, etc. B2. Cable Accessories B3. Stainless Steel Ties A = 5.4 in.2 C1. Wiring Duct A = 5.0 in.2 Cable fill #1: Open channel without devices. 3B = 2.4 in.2 3A = 2.4 in.
PAGE 379
ELECTRICAL SOLUTIONS A. System Overview PAN-WAY ® OFFICE FURNITURE RACEWAY Pan-Way ® Office Furniture Raceway is a one-piece single channel system designed to route data cabling along the top of office furniture partitions. Outlets can be positioned at any point along the partition at desk level or in the corner at the intersection of two partitions.
PAGE 380
ELECTRICAL SOLUTIONS A. System Overview Office Furniture Raceway Roadmap B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct N M D C2. Surface Raceway P 1 T C3. Abrasion Protection O S Q C4. Cable Management L D1. Terminals D2. Power Connectors D3. Grounding Connectors G See exploded view 2 pg. C2.79 C J K F V See exploded view 1 pg. C2.78 A B E H U E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5.
PAGE 381
ELECTRICAL SOLUTIONS A. System Overview 1 OFR20**6 – Office Furniture Raceway (page C2.80) A OFCR70**6 – Corner Raceway Base (page C2.80) L OFR20MPT** – Mid Panel Tee Fitting (page C2.82) M OFR20WE** – Wall Entrance Fitting (page C2.82) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties OFCRC70**6 – Corner Raceway Cover (page C2.80) N C OFVR5**6 – Vertical Raceway (page C2.80) O OFR20T** – Tee Fitting (page C2.82) D OFR20CP**8 – Communication Pole (page C2.
PAGE 382
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Office Furniture Configurations Exploded View 1 Components Required B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway See page A. OFR20OFCR70**4 = Four cubicle drop fitting. C2.81 B. OFCR70**6 = Corner raceway base. C2.80 C. OFCR70EC = End cap fitting. C2.82 D. OF70FV4 = Vertical sloped communication snap-on faceplate. C2.82 E. Mini-Com ® Modules. F. OFCRC70**6 = Corner raceway cover. — C2.
PAGE 383
ELECTRICAL SOLUTIONS A. System Overview Office Furniture Configurations (continued) Exploded View 2 B1. Cable Ties Components Required See page A. OFR20SO** = Spill-over fitting. C2.82 B. OFVR5**6 = Vertical raceway. C2.80 C. OFR20DMB = Desk mount box. C2.82 D. Mini-Com Modules. E. OF70FH4** = Horizontal sloped communication snap-on faceplate. ® B2. Cable Accessories B3. Stainless Steel Ties — C2.83 C1. Wiring Duct C2. Surface Raceway A C3. Abrasion Protection C4.
PAGE 384
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 385
ELECTRICAL SOLUTIONS A. System Overview Pan-Way Office Furniture Raceway Fittings (continued) ® B1. Cable Ties Std. Std. Labels Pkg. Ctn. Required Color‡ Qty. Qty. Part Number Part Description OFR20CPOB8 Communication pole. Allows for data cable entry into office furniture raceway from suspended ceiling. 8' pole allows maximum 7' distance from top of furniture partition to ceiling. Must be used with OFR20MPT**. Note: Not intended for use at intersection of furniture panels.
PAGE 386
ELECTRICAL SOLUTIONS A. System Overview Pan-Way ® Office Furniture Raceway Fittings (continued) B1. Cable Ties Part Number B2. Cable Accessories OFCR70ECOB Corner raceway end cap fitting. Opening allows cord passage through fitting such as monitor and keyboard cables. Supplied with adhesive tape. — Office Beige 1 10 OFR20SOOB Spill-over fitting. Allows transition from office furniture raceway run horizontally along partition wall to office furniture vertical raceway in one location.
PAGE 387
ELECTRICAL SOLUTIONS A. System Overview Pan-Way Office Furniture Raceway Fittings (continued) ® Part Number Inside corner fitting. Used to join sections of office furniture raceway at inside corner. Supplied with adhesive tape. — Outside corner fitting. Used to join sections of office furniture raceway at outside corner. Supplied with adhesive tape. — OFR20CCOB-X Coupler fitting. For use with office furniture raceway.
PAGE 388
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Cable Fill Capacities for Office Furniture Raceway This information is to be used as a guide in selecting the proper size raceway. The maximum amounts may vary according to the cable installation methods, straightness of cables, etc. B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct A = 2.31 in.2 C2. Surface Raceway C3.
PAGE 389
ELECTRICAL SOLUTIONS A. System Overview PAN-POLE ™ POWER AND COMMUNICATION POLES Pan-Pole ™ Power and Communication Poles provide industry-leading solutions for cable routing in the open office environment. Available with pre-terminated electrical outlets with divided channel for power and communication applications or as an open channel communication pole. B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1.
PAGE 390
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Pan-Pole ™ Power Pole • Dual channel aluminum pole is equipped with pre-terminated electrical outlets and provides channel separation for the installation of communication cabling and modules • UL and CSA rated 600 V • Available in 11 or 13 foot lengths and supplied with a non-metallic cover • Electrical outlets are pre-wired Pre-installed components include: 1.
PAGE 391
ELECTRICAL SOLUTIONS Installation of Communication Outlets on Pan-Pole ™ Power Pole B1. Cable Ties Utilizing Standard Screw-On Faceplates Components Required A. System Overview See page A. CPG** = Single gang rectangular screw-on faceplate (screws included). B. CFG2** = Mini-Com ® Module Frame – 2-port. — C. Mini-Com ® Modules. — D. T70SDB-X = Standard faceplate bracket. C2.22 E. PCPA**R20 power pole. C2.86 C2.42 B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 392
ELECTRICAL SOLUTIONS A. System Overview Installation of Communication Outlets on Pan-Pole ™ Power Pole (continued) B1. Cable Ties Utilizing Panduit Snap-On Faceplates B2. Cable Accessories B3. Stainless Steel Ties Components Required A. UIT70FV2** = Single gang vertical sloped communication snap-on faceplate. B. Mini-Com ® Modules. C. PCPA**R20 power pole. See page — — C2.86 C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2.
PAGE 393
ELECTRICAL SOLUTIONS A. System Overview Pan-Pole Communication Pole ™ • Single channel aluminum pole for routing low voltage communication cabling only • Poles are available in 11 or 13 foot lengths and are supplied with a non-metallic cover Supplied mounting hardware includes: 1. Entry end bend radius fitting 2. Ceiling T-bar bracket 3. Ceiling tile trim plate 4. End cap 5. End cap floor grip pad B1. Cable Ties B2. Cable Accessories Std. Pkg. Part Number Part Description Color‡ Qty.
PAGE 394
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Installation of Communication Outlets on Pan-Pole ™ Communication Pole Utilizing Standard Screw-On Faceplates Components Required See page A. CPG** = Single gang rectangular screw-on faceplate (screws included). C2.42 B. CFG2** = Mini-Com ® Module Frame – 2-port. — C. Mini-Com ® Modules. — D. T70SDB-X = Standard faceplate bracket. C2.22 E. PCPA** = Communication pole.
PAGE 395
ELECTRICAL SOLUTIONS Installation of Communication Outlets on Pan-Pole Communication Pole (continued) ™ A. System Overview B1. Cable Ties Utilizing Panduit Snap-On Faceplates Components Required See page A. UIT70FV2** = Single gang vertical sloped communication snap-on faceplate. — B. Mini-Com ® Modules. — C. PCPA** = Communication pole. C2.89 B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1.
PAGE 396
ELECTRICAL SOLUTIONS A. System Overview Pan-Pole ™ Extension Kits B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct PCPAK22 PCPAK16 Part Number PCPAK22IW Part Description Pan-Pole ™ Extension Kit. To extend the 11' pole to 22'. Extension kit includes: Fully assembled 11' pole with brace/coupler, additional wiring, and screws. Note: Customer needs to purchase a separate standard 11' pole to make the required length. PCPAK16IW Pan-Pole ™ Extension Kit.
PAGE 397
ELECTRICAL SOLUTIONS A. System Overview Pan-Pole ™ Replacement Parts Part Number Part Description PCPKITIW Replacement parts include: bend radius control ramp, two thumb screws, one two-piece ceiling trim plate and one end cap with floor grip pad. Also available in EI (Electric Ivory). PCPKIT PCPTP Std. Std. Pkg. Ctn. Color Qty. Qty. Off 1 5 White PCPTPIW Replacement ceiling trim plate. Off White 1 — PCPECIW Replacement end cap with floor grip pad. Also available in EI (Electric Ivory).
PAGE 398
ELECTRICAL SOLUTIONS A. System Overview Cable Fill Capacities for Pan-Pole ™ Power and Communication Poles The maximum amounts may vary according to the cable installation methods, straightness of cables, etc. B1. Cable Ties B2. Cable Accessories 2A 2A 2B 2B B3. Stainless Steel Ties A = .47 in.2 C1. Wiring Duct A = 2.75 in.2 A = .43 in.2 A = 2.15 in.2 Cable fill #1: Power pole with data terminals using vertical sloped snap-on communication faceplate.
PAGE 399
ELECTRICAL SOLUTIONS A. System Overview ABRASION PROTECTION Panduit abrasion protection products provide an economical and easy way to insulate, protect, bundle and color-code components and cable. A wide variety of sizes and materials are available to meet a broad range of indoor and outdoor applications.To help assure optimum quality, Panduit abrasion protection products are designed and manufactured to meet applicable quality standards including International, UL, Military, ISO, and Aerospace. B1.
PAGE 400
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Part Number System for Pan-Wrap™ PW Type B2. Cable Accessories PW = Pan-Wrap™ F Outside Diameter Material Package Size Color Suffix 38 = 3/8" F = Polyethylene L = 50' (15.2m) Leave Blank = Natural 50 = 1/2" FR = Flame Retardant Polyethylene C = 100' (30.5m) 20 = Black Polyethylene T = 200' (61.0m) 3 = Orange TL = 250' (76.
PAGE 401
ELECTRICAL SOLUTIONS A. System Overview Pan-Wrap™ Installation Tools • Patented installation tool with 180° opening allows easy loading of maximum bundle diameters to speed installation, providing the lowest installed cost Part Number PWT38 PWT50 PWT75 PWT100 PWT150 Color White White White White White For Use With PW38F- Series PW50F- Series PW75F- Series PW100F- Series PW150F- Series Std. Pkg. Qty.** 1 1 1 1 1 B1. Cable Ties B2. Cable Accessories B3.
PAGE 402
ELECTRICAL SOLUTIONS A. System Overview Spiral Wrap • Harness multiple cables into a single manageable bundle • Allows breakouts of single/multiple cables • Provides abrasion protection for wire, cables, hoses, and tubing B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4.
PAGE 403
ELECTRICAL SOLUTIONS A. System Overview Spiral Wrap (continued) Part Number T50F-TL Material Polyethylene Color Natural Length Per Reel Ft. m 250 76.2 T50F-TL4Y Polyethylene Yellow 250 76.2 T62F-C Polyethylene Natural 100 30.5 1/2 – 4 1/2 12.7 – 114.3 0.62 15.9 T62F-TL Polyethylene Natural 250 76.2 1/2 – 4 1/2 12.7 – 114.3 0.62 15.9 T75F-C Polyethylene Natural 100 30.5 5/8 – 5 15.9 – 127.0 0.75 19.1 T75F-T Polyethylene Natural 200 61.0 5/8 – 5 15.9 – 127.0 0.75 19.
PAGE 404
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Spiral Wrap (continued) Part Number T25R-MY T25R-M20Y T38R-CY T38R-TLY T50R-CY T50R-TLY C1. Wiring Duct T62R-CY T75R-CY C2. Surface Raceway C3. Abrasion Protection T100R-CY T12FR-CY T12FR-C20Y T19FR-CY T19FR-C20Y C4. Cable Management T25FR-CY T25FR-C20Y D1. Terminals T25FR-MY T25FR-M20Y D2. Power Connectors T38FR-CY T38FR-C20Y T38FR-TLY D3. Grounding Connectors T50FR-CY T50FR-C20Y E1.
PAGE 405
ELECTRICAL SOLUTIONS A. System Overview Spiral Wrap (continued) Part Number T12N-C Material* Nylon 6.6 Color Natural Length Per Reel Ft. m 100 30.5 T19N-C Nylon 6.6 Natural 100 30.5 1/8 – 1 3.2 – 25.4 0.19 4.8 T25N-C Nylon 6.6 Natural 100 30.5 3/16 – 2 4.8 – 50.8 0.25 6.4 T38N-C Nylon 6.6 Natural 100 30.5 5/16 – 3 7.9 – 76.2 0.38 9.5 T50N-C Nylon 6.6 Natural 100 30.5 3/8 – 4 9.5 – 101.6 0.50 12.7 T62N-C Nylon 6.6 Natural 100 30.5 1/2 – 4 1/2 12.7 – 114.3 0.
PAGE 406
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Part Number System for Grommet Edging GEE 36 Type B2. Cable Accessories B3. Stainless Steel Ties GE = Grommet Edging Strips F – – A C 0 Max. Panel Thickness 36 = 0.036" thickness Material Adhesive Package Size Color Suffix F = Polyethylene N = Nylon 6.6 A = Adhesive Lined Q = 25' 62 = 0.062" thickness 0 = Weather Resistant Black Leave Blank = Non-Adhesive L = 50' Leave Blank = Natural C = 100' GEE = Slotted 99 = 0.
PAGE 407
ELECTRICAL SOLUTIONS A. System Overview Grommet Edging (continued) Part Number Width A In. mm Height B In. mm Panel Thickness Range In. mm Material Color Temperature Range Std. Pkg. Qty.‡ B1. Cable Ties B2. Cable Accessories Solid – Use on straight edges only GES36F-C 0.11 2.7 0.12 3.0 0.026 – 0.036 0.7 – 0.9 Polyethylene Natural 1 GES36F-C0 0.11 2.7 0.12 3.0 0.026 – 0.036 0.7 – 0.9 Black 1 GES62F-C 0.13 3.3 0.16 4.1 0.036 – 0.062 0.9 – 1.
PAGE 408
ELECTRICAL SOLUTIONS A. System Overview Grommet Edging (continued) B1. Cable Ties Part Number B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management Width A In. mm Height B In. mm Panel Thickness Range In. mm Material Color Temperature Range Std. Pkg. Qty.‡ Solid Flame Retardant – Used on straight edges only GES36FR-CY 0.11 2.7 0.12 3.0 0.026 – 0.036 0.7 – 0.9 Flame Retardant Polyethylene Natural GES62FR-CY 0.
PAGE 409
ELECTRICAL SOLUTIONS A. System Overview Part Number System for Corrugated Loom Tubing CLT 100 N Type Bundle Diameter Material 25 35 38 50 62 75 100 125 150 188 N = Heat Stabilized Nylon CLT = Slit Wall CLTS = Solid Wall = = = = = = = = = = 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1 1/4" 1 1/2" 1 7/8" – C 630 Package Size X L C T D .75M 125M 2M 2.5M 4M 5M 7M 10M F = Polyethylene = = = = = = = = = = = = = B1.
PAGE 410
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management Corrugated Loom Tubing – Slit (continued) Length Per Reel Ft. m 100 30.5 Inside Diameter In. mm 0.76 19.3 Outside Diameter In. mm 0.94 23.8 Temperature Range -40°F – 122°F (-40°C – 50°C) Std. Pkg. Qty.* 1 Part Number CLT75F-C4 Material Polyethylene Color Yellow CLT75F-C20 Polyethylene Black 100 30.5 0.
PAGE 411
ELECTRICAL SOLUTIONS A. System Overview Corrugated Loom Tubing – Slit (continued) Part Number Material Color Length Per Reel Ft. m Inside Diameter In. mm Outside Diameter In.
PAGE 412
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Corrugated Loom Tubing Fittings • Provide a secure way to join CLT at junctions and breakouts while improving the appearance of wire harnesses • Color: Black • Material: Polypropylene B2. Cable Accessories Branch Diameter B3. Stainless Steel Ties C1. Wiring Duct Part Number CF382538F-Q CF502550F-Q CF503850F-Q CF752575F-Q In. 0.38 0.50 0.50 0.75 mm 9.5 12.7 12.7 19.1 Trunk Diameter In. mm 0.25 6.4 0.25 6.4 0.38 9.5 0.25 6.4 CF753875F-Q 0.
PAGE 413
ELECTRICAL SOLUTIONS Braided Expandable Sleeving – Polyethylene Terephthalate (PET) • Provides continuous abrasion protection for wires, cables, hoses and tubing • Highly flexible open weave will not trap heat or humidity • Allows for use with irregular shapes Part Number SE12P-TR0 SE12P-TR8 SE12P-MR0 SE12P-MR8 SE12P-MR10 SE25P-TR0 SE25P-TR8 SE25P-MR0 SE25P-MR8 SE25P-MR10 SE38P-TR0 SE38P-TR8 SE38P-MR0 SE38P-MR8 SE38P-MR10 SE50P-CR0 SE50P-CR8 SE50P-DR0 SE50P-DR8 SE50P-DR10 SE75P-CR0 SE75P-CR8 SE75P-DR0 SE75
PAGE 414
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Braided Expandable Sleeving – Flame Retardant Polyethylene Terephthalate • Provides continuous abrasion protection for wires, cables, hoses and tubing • Highly flexible open weave will not trap heat or humidity • Rated for use up to 257°F (125°C) B2. Cable Accessories Part Number SE12PFR-TR0 SE12PFR-MR0 SE12PFR-TR8 SE12PFR-MR8 SE12PFR-MR10 SE25PFR-TR0 SE25PFR-MR0 SE25PFR-TR8 SE25PFR-MR8 B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 415
ELECTRICAL SOLUTIONS A. System Overview Fray Resistant Braided Expandable Sleeving • Fray-resistant design resists fraying when cut with scissors • Provides continuous abrasion protection resistance for wires, cables, and tubing • For indoor use only • Rated for use up to 257°F (125°C) • Material: Polyethylene Terephthalate B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Nominal I.D. Part Number SE12PSC-TR0 SE25PSC-TR0 Color Black Black In. 0.12 0.25 mm 3.2 6.
PAGE 416
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Part Number System for Non-Shrink PVC Tubing – TV105 12 M Type TV105 = PVC Tubing B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway Nominal Size 12 = 12 AWG 6 = 6 AWG 3 = 3 AWG 1 = 1 AWG 0.38 = 3/8" 0.50 = 1/2" 0.75 = 3/4" 1.0 = 1" Package Quantity C TL D M = = = = 100' (30.5m) 250' (76.2m) 500' (152.4m) 1000' (304.
PAGE 417
ELECTRICAL SOLUTIONS A. System Overview Flammability Tests and Classification Abrasion Protection Products Flammability Tests and Classifications B1. Cable Ties • A number of test procedures have been developed which can be used for the evaluation and comparison of various materials to support combustion • Review the following classifications to find which category is designed to suit your abrasion and protection applications B2. Cable Accessories B3. Stainless Steel Ties C1.
PAGE 418
ELECTRICAL SOLUTIONS A. System Overview C2. Surface Raceway D1. Terminals SPIRAL WRAP C4. Cable Management E1. Labeling Systems E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions PAN-WRAP ™ E3. Pre-Printed & Write-On Markers Some Discoloration 2000 (D368) 0.
PAGE 419
ELECTRICAL SOLUTIONS A. System Overview SLEEVING Polyethylene Terephthalate (PET) This material is a thermoplastic polyester material designed for indoor applications.It is rated for use up to 257°F and will tolerate short-term exposure up to 446°F. Colors: Black, White and Gray. Flame Retardant Polyethylene* Terephthalate (PET) This material is a self-extinguishing thermoplastic polyester that can be used indoors. It is also rated for use up to 257°F and will tolerate short term exposure up to 446°F.
PAGE 420
ELECTRICAL SOLUTIONS A. System Overview Panduit Heat Shrink Tubing Heat Shrink Tubing Quick Selection Guide B1. Cable Ties Quick reference for Panduit Heat Shrink for specific location applications U.L. Listed C1. Wiring Duct X UL Recognized X‡ X X X X CSA Certified X‡ X X X X X X X X X^ X X X VW-1-Rated Very Flexible C2. Surface Raceway C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3.
PAGE 421
ELECTRICAL SOLUTIONS A. System Overview Part Number System for Thin Wall Heat Shrink – HSTT 12 Type Expanded Diameter HSTT HSTTV HSTTN HSTTK HSTTT HSTTP HSTTPN HSTTVA HSTTRA HSTTA HSTT4A HST HSEC i HSECFR = Thin Wall = Thin Wall VW-1 = Thin Wall Neoprene = Thin Wall PVDF KYNAR ▲ = Thin Wall TFE‡ 05 = 3/64" (1.2mm) 06 = 1/16" (1.6mm) 09 = 3/32" (2.4mm) 12 = 1/8" (3.2mm) 19 = 3/16" (4.8mm) = Thin Wall PVC 25 = 1/4" (6.4mm) = Crystal Clear Thin Wall PVC 38 = 3/8" (9.
PAGE 422
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories HSTT Heat Shrink 4 Foot Pieces and Reels • Applications include insulating, protecting, and color coding wires and cables • Voltage: 600 V • Shrink ratio: 2:1 • Flammability: Flame retardant EXCEPT clear • UL Recognized, CSA Certified • Mil Spec: AMS-DTL-23053/5 Class 1 (Colors) Class 2 (Clear) • Temperature range: -67°F to 275°F (-55°C to 135°C) • For dry locations • Material: Black cross-linked Polyolefin B3.
PAGE 423
ELECTRICAL SOLUTIONS A. System Overview HSTT Heat Shrink 4 Foot Pieces and Reels (continued) Nominal Diameter Min. Expanded I.D. Nominal Max. Recovered Recovered Wall I.D. Thickness B1. Cable Ties Length Length per Reel Std. Pkg. Qty. 5 Std Ctn. Qty. — Part Number* HSTT50-48-5 In. 0.500 mm 12.7 In. 0.500 mm 12.7 In. 0.250 mm 6.4 In. 0.025 mm 0.6 Ft. 4 m 1.2 Ft. — m — HSTT50-48-Q 0.500 12.7 0.500 12.7 0.250 6.4 0.025 0.6 4 1.2 — — 25 — HSTT50-48-T 0.500 12.7 0.
PAGE 424
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Heat Shrink in 6 Inch Pieces; Black, Single Diameter • Applications include insulating, protecting, and color coding wires and cables • Voltage: 600 V • Shrink ratio: 2:1 • Flammability: Flame retardant • UL Recognized, CSA Certified • Mil Spec: AMS-DTL-23053/5 Class 1 Part Number HSTT06-Y Nominal Diameter In. mm 0.063 1.6 Nominal Min. Max. Recovered Total Expanded I.D. Recovered I.D. Wall Thickness No. In. mm In. mm In.
PAGE 425
ELECTRICAL SOLUTIONS A. System Overview Heat Shrink in 6 Inch Pieces; Black, Multiple Diameters • • • • Applications include insulating and protecting wires and cables Voltage: 600 V Shrink ratio: 2:1 UL Recognized, CSA Certified • • • • Mil Spec: AMS-DTL-23053/5 Class 1 Temperature range: -67°F to 275°F (-55°C to 135°C) For dry locations Material: Cross-linked Polyolefin B1. Cable Ties B2. Cable Accessories Part Number HSTT-YK1 Nominal Diameter Various – Smaller Range No.
PAGE 426
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories HSTTV Heat Shrink 4 Foot Pieces • UL Recognized, CSA Certified • Mil Spec: AMS-DTL-23053/5 Class 3 • Temperature range: -67°F to 275°F (-55°C to 135°C) • For dry locations • Material: Black cross-linked Polyolefin • Applications include insulating and protecting wires and cables • Fast shrink time • Voltage: 600 V • Shrink ratio: 2:1 • Flammability: Meets UL 224 VW-1 B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 427
ELECTRICAL SOLUTIONS A.
PAGE 428
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories HSTTV Heat Shrink on Bulk Reels • Applications include insulating, protecting, and color coding wires and cables • Fast shrink time • Voltage: 600 V • Shrink ratio: 2:1 • Flammability: Meets UL 224 VW-1 • • • • • UL Recognized, CSA Certified Mil Spec: AMS-DTL-23053/5 Class 3 Temperature range: -67°F to 275°F (-55°C to 135°C) For dry locations Material: Cross-linked Polyolefin B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 429
ELECTRICAL SOLUTIONS A. System Overview HSTTV Heat Shrink on 25 Foot Reels • Applications include insulating and protecting wires and cables • Fast shrink time • Voltage: 600 V • Shrink ratio: 2:1 • Flammability: Meets UL 224 VW-1 • UL Recognized, CSA Certified • Mil Spec: AMS-DTL-23053/5 Class 3 • Temperature range: -67°F to 275°F (-55°C to 135°C) • For dry locations • Material: Black cross-linked Polyolefin B1. Cable Ties B2. Cable Accessories Part Number HSTTV05-Q Nominal Diameter In. mm 0.046 1.
PAGE 430
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories HSTTP PVC Heat Shrink • Applications include insulating and protecting wires and cables • Good resistance to most fuels and oils • Voltage: 600 V • Shrink ratio: 2:1 • Flammability: Meets UL 224 VW-1 • UL Recognized, CSA Certified • Temperature range: -4°F to 221°F (-20°C to 105°C) • For dry locations • Material: Black cross-linked Polyvinyl Chloride • Mil Spec: AMS-DTL-23053/2 Class 1 B3. Stainless Steel Ties C1.
PAGE 431
ELECTRICAL SOLUTIONS A.
PAGE 432
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories TFE Heat Shrink 4 Foot Pieces • Applications include insulating and protecting wires and cables • Voltage: 600 V • Shrink ratio: 2:1 • Mil Spec: AMS-DTL-23053/12 Class 3 • Temperature range: -88°F to 482°F (-67°C to 250°C) B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2.
PAGE 433
ELECTRICAL SOLUTIONS A. System Overview HSTTK Kynar* Heat Shrink 4 Foot Pieces • Applications include insulating and protecting wires and cables • Excellent chemical and abrasion resistance • Use in high temperature or solvent rich environment • Voltage: 600 V • Shrink ratio: 2:1 • Flammability: Meets UL 224 VW-1 • Mil Spec: AMS-DTL-23053/8 • Temperature range: -67°F to 347°F (-55°C to 175°C) • For dry locations • Material: Clear Cross-linked Polyvinylidfene Fluoride (PVDF) B1. Cable Ties B2.
PAGE 434
ELECTRICAL SOLUTIONS A. System Overview HSTTVA Heat Shrink 4 Foot and 6 Inch Pieces (continued) Min. Expanded I.D. In. mm B1. Cable Ties Part Number B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct 6" (152.4mm) Pieces HSTTVA12-Y HSTTVA19-Y HSTTVA25-Y HSTTVA38-Y HSTTVA50-Y HSTTVA75-Y HSTTVA100-Y Nominal Diameter In. mm 0.125 0.187 0.250 0.375 0.500 0.750 1.00 3.2 4.8 6.4 9.5 12.7 19.1 25.4 0.125 0.187 0.250 0.375 0.500 0.750 1.00 Max. Recovered I.D. In. mm 3.2 4.8 6.4 9.5 12.7 19.
PAGE 435
ELECTRICAL SOLUTIONS A.
PAGE 436
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 437
ELECTRICAL SOLUTIONS A. System Overview Heat Shrink End Caps • Applications include insulating and protecting wires and cables • Adhesive lined inner wall seals and provides excellent protection against moisture • Voltage rating of 600 V • Shrink ratio: 2.5:1 (HSEC); 3:1 (HSECFR) • Temperature range: -40°F to 257°F (-40°C to 125°C) HSEC -67°F to 239°F (-55°C to 110°C) HSECFR • For wet locations • Material: Adhesive lined black cross-linked Polyolefin; HSECFR = Flame retardant B1. Cable Ties B2.
PAGE 438
ELECTRICAL SOLUTIONS A. System Overview Plastic Heat Shrink Tubing Kit Boxes – For Dry Locations B1. Cable Ties Part Number KP-HSTT1 Part Description Heat shrink kit box – plastic case, various sizes. Black only. Contents 35 ea. of 3/32",1/8" 21 ea. of 3/16",1/4" 7 ea. of 3/8",1/2" KP-HSTT2 Heat shrink kit box – plastic case, various sizes, various colors. 35 ea. (5 ea. color) 3/32",1/8" 21 ea. (3 ea. color) 3/16",1/4" 7 ea. (1 ea.
PAGE 439
ELECTRICAL SOLUTIONS A. System Overview Heat Shrink Process Defined Extrusion/Material Various thermoplastic materials that will repeatedly melt and flow, such as polyolefin, PVC, etc., are extruded into tube form. If examined at a molecular level, the material would resemble long thin strands weakly connected at various points by crystalline structure. If left in this state, the performance of the tube would be limited to that of the base material. B1. Cable Ties B2.
PAGE 440
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors Heat Shrink Installation Instructions General Instructions Position heat shrink over the object to be covered. Using a heat gun, soft yellow flame torch, infrared heat source or oven, evenly heat the tubing until it has fully recovered and conforms to the object.
PAGE 441
ELECTRICAL SOLUTIONS Recommended Tubing Size for Common Wire Types Based on Location A. System Overview For Insulated Wire, Non-Insulated Wire, and Insulated Wire with Copper Connectors B1. Cable Ties Instructions for Tube Selection: 1) Determine location type. LOCATION: DRY: A location not normally subject to dampness or wetness. A location classified as dry may be temporarily subject to dampness or wetness, as in the case of a building under construction.
PAGE 442
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Dry-Shrink ™, Damp-Shrink ™, and Wet-Shrink ™ Heat Shrink Tubing Technical Data General Information Product Type Typical Applications Specific Gravity Flammability HSTT Economical and easy way to insulate, protect, harness and identify electrical and electronic components in a wide variety of applications. Black is U.V. Resistant. Suitable for use in dry locations. Class 1, 1.35 Class 2, 1.
PAGE 443
ELECTRICAL SOLUTIONS A. System Overview CABLE MANAGEMENT Panduit offers a complete line of cable management products and accessories to route and secure cable. These products are an essential part of a clean, professional installation, which help improve quality and increase system performance. B1. Cable Ties B2. Cable Accessories B3.
PAGE 444
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 445
ELECTRICAL SOLUTIONS A. System Overview Cool Boot ™ Raised Floor Assembly (continued) AØ A B1. Cable Ties B B2. Cable Accessories 0.6 (REF.) 0.6 (REF.) 0.10 (REF.) B3. Stainless Steel Ties 0.10 (REF.) RFG*X*Y 2.5 (REF.) 2.5 (REF.) Integral Mount Length Part Number Material In. mm Width In. mm Diameter In. mm Max. Bundle Diameter In. mm Std. Pkg. Qty. Std. Ctn. Qty.
PAGE 446
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories J-Pro ™ Cable Support System • Patented design provides complete horizontal and vertical 1" (25.4mm) bend radius control that helps prevent degradation of cable performance • UL 2043 and CAN/ULC S102.
PAGE 447
ELECTRICAL SOLUTIONS A. System Overview J-Pro™ Cable Support System (continued) Max. Bundle Capacity Max. Cable Capacity Std. Cat 5e Pkg. (.193") Qty. Part Description In. mm Cat 6A (.310") Cat 6 (.236") J Hook with screw-on beam clamp for use with flanges up to 1/2" (12.7mm) thick. 0.75 19.0 4 8 12 50 1.31 33.3 14 28 40 50 JP2SBC50-L20 2.00 50.8 30 50 70 50 JP4SBC50-X20 4.00 101.6 115 210 280 10 J Hook with screw-on beam clamp for use with flanges up to 1/2" (12.
PAGE 448
ELECTRICAL SOLUTIONS A. System Overview J-Pro™ Cable Support System (continued) B1. Cable Ties Max. Bundle Capacity B2. Cable Accessories Part Number* Cat. 6 (.236") Std. Cat. 5e Pkg. (.193") Qty. In. mm Cat. 6A (.310") 0.75 19.0 4 8 12 50 Z-Purlin Clips JP75ZP-L20 B3. Stainless Steel Ties Part Description Max. Cable Capacity JP131ZP-L20 JP2ZP-L20 C1. Wiring Duct J Hook with z-purlin clip for use with angled flanges up to 1/4" (6.4mm) thick. 1.31 33.3 14 28 40 50 JP2ZP-L20 2.
PAGE 449
ELECTRICAL SOLUTIONS A.
PAGE 450
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories J-Mod ® Cable Support System • Modular design allows flexibility to assemble system in multiple configurations • Unique chaining bracket design creates a strong metal backbone and allows expansion of the system without disturbance of an existing installation Part Number B3. Stainless Steel Ties C1.
PAGE 451
ELECTRICAL SOLUTIONS A. System Overview Bridle Rings and Fastening Clip • Multiple diameters, thread sizes, and configurations • Threaded and non-threaded sizes are compatible with spring steel clip (BR-MPCL) clamp providing a solid securing point for the bridle ring Part Number • Other unique labor saving assemblies differentiate from competition – including pre-assemblies with powder actuated fasteners, toggle wings, and clearance holes for user supplied fasteners Part Description B1.
PAGE 452
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Metal Stud Accessories • Metal stud grommets and cable support manager support and protect cable within the building structure • Metal Stud Punching Tool punches a 1-11/32" (34.1mm) round hole in 25 GA. min. to 20 GA max. mild steel studs; contoured handle; lightweight aluminum head; automatic hole centering on standard width (3.625") studs; replaceable punch and dies; self-stripping design that eliminates punch hang-ups B2. Cable Accessories B3.
PAGE 453
ELECTRICAL SOLUTIONS A.
PAGE 454
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Stackable Cable Rack Spacers • Patented ladder rack accessories • Separate and support cable and prevent pinch points between the bottom row of cable and the rung as a result of the weight of multiple cable layers applied on top of each other • Mount to ladder rack with standard cross section cable ties B3. Stainless Steel Ties CRS6-X C1. Wiring Duct CRS1-X C2. Surface Raceway C3.
PAGE 455
ELECTRICAL SOLUTIONS A. System Overview Vertical D-Rings • Patented cable manager ring • Standard EIA hole spacing allows product to be mounted to any standard rack • Flexible material allows arm to rotate so entire cable bundle can be inserted and removed • 1/4" mounting holes allow for a variety of screws to secure the D-ring to a surface • Material: Black Polycarbonate B2. Cable Accessories Part Number Part Description CMVDR1 Vertical D-ring. Outside dimensions 5.70"L x 2.00"W.
PAGE 456
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Flat Pan-Post ™ Standoffs • Standard EIA hole spacing allows product to be mounted with user supplied screws up to 1/4" diameter • Organize cables in standard cabinets and racks Std. Pkg. Qty. 5 Std. Ctn. Qty. 100 Part Number PPF2S-S25-V Part Description Nylon 6.6 flat Pan-Post ™ Standoff. Use with miniature, intermediate, and standard cross section cable ties. Dimensions 5.42"L x 1.50"H x 0.
PAGE 457
ELECTRICAL SOLUTIONS A. System Overview PAN-TERM® TERMINALS Panduit ® Pan-Term ® Terminals are designed and manufactured for fast assembly, and reliable performance. Panduit provides an extensive line of tooling designed specifically to provide optimum performance. As the demand for loose piece terminals increases, it becomes essential to provide a complete system for termination products.
PAGE 458
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Features and Benefits – Pan-Term ® Terminals All Panduit terminals feature high quality materials made with electrolytic copper for high conductivity and are tin-plated for corrosion resistance. Non-Insulated Terminals Type P B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 459
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Pan-Term ® Ring Terminals Insulation Material Style Standard Ring Nylon Multiple Stud Standard Ring Ring Terminals Vinyl Multiple Stud Page Number B1. Cable Ties Feature Type Insulation Grip Funnel Entry Expanded Insulation Heavy Duty PN-R PNF-R PN-RX PN-HDR D1.6 D1.7 D1.8 D1.13 B2. Cable Accessories Insulation Grip PN-610R D1.8 B3. Stainless Steel Ties Insulation Support Expanded Insulation Heavy Duty PV-R PV-RX PV-HDR D1.9 D1.
PAGE 460
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Pan-Term ® Fork Terminals B1. Cable Ties Material B2. Cable Accessories B3. Stainless Steel Ties Feature Type Page Number Standard Fork Insulation Grip Funnel Entry PN-F PNF-F D1.22 D1.22 Locking Fork Insulation Grip Funnel Entry PN-LF PNF-LF D1.24 D1.25 Insulation Grip PN-SLF D1.26 Funnel Entry PNF-SLF D1.27 Flanged Fork Insulation Grip PN-FF D1.28 Standard Fork Insulation Support Expanded Insulation PV-F PV-FX D1.
PAGE 461
ELECTRICAL SOLUTIONS A. System Overview Part Number System for Pan-Term ® Terminals P Type P = Seamed Barrel S = Seamless Tubular Barrel ■ N Insulation H = Heat Shrink K = KYNAR■ Insulated N = Nylon Insulated NF = Nylon Insulated Funnel Entry V = Vinyl Insulated = Non-Ins.
PAGE 462
ELECTRICAL SOLUTIONS A. System Overview Ring Terminal, Nylon Insulated B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Type PN-R • Ring tongue design assures a secure connection in high vibration applications • Metal insulation grip sleeve crimps to wire insulation, providing protection to the crimp joint during high vibration applications • Internal barrel serrations assure good wire contact and maximum tensile strength Part Number PN22-2R-C* C1. Wiring Duct Wire Range Color Code 0.
PAGE 463
ELECTRICAL SOLUTIONS A. System Overview Ring Terminal, Nylon Insulated – Funnel Entry B1. Cable Ties Type PNF-R • Ring tongue design assures a secure connection in high vibration applications • Metal insulation grip sleeve crimps to wire insulation, providing protection to the crimp joint during high vibration applications • Internal barrel serrations assure good wire contact and maximum tensile strength Part Number PNF18-4R-C Wire Range C Std. Ctn. Qty. 500 0.03 0.136 #6 0.76 0.22 0.
PAGE 464
ELECTRICAL SOLUTIONS A. System Overview Ring Terminal, Nylon Insulated – Expanded Insulation B1. Cable Ties B2. Cable Accessories B3.
PAGE 465
ELECTRICAL SOLUTIONS A. System Overview Ring Terminal, Vinyl Insulated – Funnel Entry B1.
PAGE 466
ELECTRICAL SOLUTIONS A. System Overview Ring Terminal, Vinyl Expanded Insulation B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Type PV-RX • Expanded wire entry designed to accommodate wire with a larger insulation thickness • Ring tongue design assures a secure connection in high vibration applications • Insulation support helps to prevent wire damage in bending applications • Brazed seam protects terminal barrel from splitting during the crimp process C1.
PAGE 467
ELECTRICAL SOLUTIONS A. System Overview Multiple Stud Terminal, Vinyl Insulated – Funnel Entry B1.
PAGE 468
ELECTRICAL SOLUTIONS A. System Overview Ring Terminal, KYNAR■ Insulated B1. Cable Ties B2. Cable Accessories B3.
PAGE 469
ELECTRICAL SOLUTIONS A. System Overview Heat Shrink, Ring Terminal B1. Cable Ties Type PH-R • Heat shrink sleeving forms a protective barrier to provide environmentally sealed terminations ideal for high moisture applications • Ring tongue design assures a secure connection in high vibration applications • Brazed seam protects terminal barrel from splitting during the crimp process Part Number PH18-6R-Q PH18-8R-Q Color Code 22 – 18 AWG Red Max. Ins. (In.) 0.
PAGE 470
ELECTRICAL SOLUTIONS A. System Overview Ring Terminal, Heavy Duty, Vinyl Insulated – Funnel Entry B1. Cable Ties B2. Cable Accessories B3.
PAGE 471
ELECTRICAL SOLUTIONS A. System Overview Ring Terminal, Large Wire, Vinyl Insulated B1. Cable Ties Type PV-R • Ring tongue design assures a secure connection in high vibration applications • Insulation support helps to prevent wire damage in bending applications • Brazed seam protects terminal barrel from splitting during the crimp process Part Number PV8-8R-QY Wire Range Figure Dimensions Recommended Std. Std. Stock Max. (In.) Color Thickness Ins. Stud Installation Pkg. Ctn. L W C Code (In.) (In.
PAGE 472
ELECTRICAL SOLUTIONS A. System Overview Ring Terminal, Large Wire, Vinyl Expanded Insulation B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Type PV-RX • Ring tongue design assures a secure connection in high vibration applications • Expanded wire entry designed to accommodate wire with a larger insulation thickness • Insulation support helps to prevent wire damage in bending applications • Brazed seam protects terminal barrel from splitting during the crimp process C1.
PAGE 473
ELECTRICAL SOLUTIONS A. System Overview Ring Terminal, Non-Insulated B1. Cable Ties Type P-R • Ring tongue design assures a secure connection in high vibration applications • Internal barrel serrations assure good wire contact and maximum tensile strength • Brazed seam protects terminal barrel from splitting during the crimp process Stud Size #2 L 0.52 W 0.20 C 0.16 0.02 #4 0.52 0.20 0.16 0.02 #6 0.52 0.20 0.16 0.02 #8 0.63 0.26 P22-10R-C* 0.02 #10 0.63 P18-4R-C 0.
PAGE 474
ELECTRICAL SOLUTIONS A. System Overview Multiple Stud Terminal, Non-Insulated B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Type P-610R • Ring tongue design assures a secure connection in high vibration applications • Teardrop shaped mounting hole of multiple stud terminals permits use with #6, #8, or #10 size studs • Internal barrel serrations assure good wire contact and maximum tensile strength C1. Wiring Duct Part Number P18-610R-C C2.
PAGE 475
ELECTRICAL SOLUTIONS A. System Overview Ring Terminal, Non-Insulated – High Temperature B1.
PAGE 476
ELECTRICAL SOLUTIONS A. System Overview Ring Terminal, Heavy Duty Non-Insulated B1. Cable Ties B2.
PAGE 477
ELECTRICAL SOLUTIONS A. System Overview Tubular Ring Terminal, Non-Insulated B1. Cable Ties Type S-R • Seamless tubular barrel provides a consistent high performance quality crimp • Round double thick tongue for reliable power applications • Barrel of terminal internally beveled to provide quick and easy wire insertion Part Number S8-10R-Q Wire Range S8-14R-Q S8-56R-Q L 8 AWG 100 140 180 B 0.40 T 0.08 0.48 1.20 0.40 0.07 25 – 5/16" 0.60 1.30 0.40 0.05 25 250 3/8" 0.60 1.40 0.
PAGE 478
ELECTRICAL SOLUTIONS A. System Overview Fork Terminal, Nylon Insulated B1. Cable Ties B2. Cable Accessories Type PN-F • Fork design provides for fast and easy installation, without the need to remove fastener • Metal insulation grip sleeve crimps to wire insulation, providing protection to the crimp joint during high vibration applications B3. Stainless Steel Ties Part Number PN22-2F-C* PN22-4F-C* C1. Wiring Duct PN22-6F-C* C2. Surface Raceway L Figure Dimensions Recommended Std. Std. Stock Max.
PAGE 479
ELECTRICAL SOLUTIONS A. System Overview Fork Terminal, Vinyl Insulated – Funnel Entry B1. Cable Ties Type PV-F • Fork design provides for fast and easy installation, without the need to remove fastener • Insulation support helps to prevent wire damage in bending applications • Brazed seam protects terminal barrel from splitting during the crimp process Part Number PV22-2F-CY* PV22-4F-CY* PV22-6F-CY* 0.03 0.150 #6 0.85 0.24 0.21 PV18-6F-CY 0.03 0.150 #6 0.86 0.30 0.21 0.03 0.150 #8 0.
PAGE 480
ELECTRICAL SOLUTIONS A. System Overview Fork Terminal, Vinyl Insulated – Expanded Insulation B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Type PV-FX • Expanded wire entry designed to accommodate wire with a larger insulation thickness • Fork design provides for fast and easy installation, without the need to remove fastener • Insulation support helps to prevent wire damage in bending applications C1. Wiring Duct Part Number PV18-6FX-CY PV18-8FX-CY C2.
PAGE 481
ELECTRICAL SOLUTIONS A. System Overview Locking Fork Terminal, Nylon Insulated – Funnel Entry B1.
PAGE 482
ELECTRICAL SOLUTIONS A. System Overview Locking Fork Terminal, Vinyl Insulated – Expanded Insulation B1. Cable Ties B2. Cable Accessories B3.
PAGE 483
ELECTRICAL SOLUTIONS A. System Overview Short Locking Fork Terminal, Nylon Insulated – Funnel Entry B1.
PAGE 484
ELECTRICAL SOLUTIONS A. System Overview Flanged Fork Terminal, Nylon Insulated B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Type PN-FF • Fork design provides for fast and easy installation, without the need to remove fastener • Flange design provides extra secure connection on a variety of applications • Metal insulation grip sleeve crimps to wire insulation, providing protection to the crimp joint during high vibration applications C1.
PAGE 485
ELECTRICAL SOLUTIONS A. System Overview Fork Terminal, Non-Insulated B1. Cable Ties Type P-F • Fork design provides for fast and easy installation, without the need to remove fastener • Internal barrel serrations assure good wire contact and maximum tensile strength • Brazed seam protects terminal barrel from splitting during the crimp process Stock Thickness (In.) 0.02 Stud Size #2 L 0.49 W 0.19 C 0.19 26 – 22 AWG 0.02 #4 0.49 0.20 0.19 0.02 #6 0.59 0.25 0.26 100 1000 P18-6FN-C* 0.
PAGE 486
ELECTRICAL SOLUTIONS A. System Overview Flanged Fork Terminal, Non-Insulated B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Type P-FF • Fork design provides for fast and easy installation, without the need to remove fastener • Flange design provides extra secure connection on a variety of applications • Internal barrel serrations assure good wire contact and maximum tensile strength Part Number P18-8FF-C C1. Wiring Duct C2. Surface Raceway P10-10FF-L C3. Abrasion Protection C4.
PAGE 487
ELECTRICAL SOLUTIONS A. System Overview Short Locking Fork Terminal, Non-Insulated B1.
PAGE 488
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Features and Benefits – Pan-Term ® Metric Terminals All Panduit terminals feature high quality materials made with electrolytic copper for high conductivity and are tin-plated for corrosion resistance.
PAGE 489
ELECTRICAL SOLUTIONS A. System Overview Part Number System for Pan-Term ® Metric Terminals PM V Type 1 Insulation Wire Range PM = Pan-Term ® N = Nylon Metric NF = Nylon Funnel V = Vinyl 2 3 R B Stud Size Tongue Configuration Special Configuration Std. Pkg. Size = M3 (#6) R = Ring X = 10 = M4 (#8) F = Fork B = Butted Seam 1 = 0.5 – 1.0mm 3 (22 – 18 AWG) 4 2 2 = 1.5 – 2.5mm 5 (16 – 14 AWG) 2 6 6 = 4.0 – 6.0mm (12 – 10 AWG) 8 C B1. Cable Ties B2.
PAGE 490
ELECTRICAL SOLUTIONS A. System Overview Metric Ring Terminal, Vinyl Insulated – Funnel Entry B1. Cable Ties Type PMV-R B2. Cable Accessories • Ring tongue design assures a secure connection in high vibration applications • Insulation support helps to prevent wire damage in bending applications • Brazed seam protects terminal barrel from splitting during the crimp process B3. Stainless Steel Ties Wire Range (mm2) Color Code 0.5 – 1.0 Red Stud Size M3 L 20.8 W 5.8 C 5.6 4.01 M4 23.1 7.9 7.
PAGE 491
ELECTRICAL SOLUTIONS A. System Overview Metric Fork Terminal, Nylon Insulated – Funnel Entry B1. Cable Ties Type PMNF-F • Fork design provides for fast and easy installation, without the need to remove fastener • Metal insulation grip sleeve crimps to wire insulation, providing protection to the crimp joint during high vibration applications • Internal barrel serrations assure good wire contact and maximum tensile strength • Maximum insulation temperature 221°F (105°C) • Rated up to 600 V Color Code 0.
PAGE 492
ELECTRICAL SOLUTIONS A. System Overview Metric Fork Terminal, Non-Insulated B1. Cable Ties Type PM-F B2. Cable Accessories • Fork design provides for fast and easy installation, without the need to remove fastener • Internal barrel serrations assure good wire contact and maximum tensile strength • Brazed seam protects terminal barrel from splitting during the crimp process B3. Stainless Steel Ties L 16.0 W 5.8 C 5.6 M4 17.5 8.1 6.4 PM1-5F-C M5 18.0 8.8 6.6 PM2-3F-C M3 16.0 5.8 5.
PAGE 493
ELECTRICAL SOLUTIONS A. System Overview Steel Kit Boxes • Latch prevents accidental opening • Once lid is closed, terminals remain in their compartments • Handle for portability or as drawer pull when used in rack • Drop-in label area on front measures: 2.13"H x 13.75"W x 9.75"D (54.0mm x 349.3mm x 247.7mm) Std. Pkg. Qty. 1 Part Number K-1000 Part Description Empty steel box, 20 terminal compartments and one tool compartment, dimensions: 2.00"H x 13.33"W x 9.33"D (50.8mm x 338.6mm x 237.0mm).
PAGE 494
ELECTRICAL SOLUTIONS A. System Overview Industrial Maintenance Kits B1. Cable Ties • Steel kits have individual compartments for storage of terminals • Convenient carrying handle B2.
PAGE 495
ELECTRICAL SOLUTIONS A. System Overview PAN-TERM® DISCONNECTS Panduit ® Pan-Term ® Disconnects are designed and precision made to function as a reliable method of making quick, repeatable interconnections. Available with nylon, premium nylon, vinyl insulation or non-insulated. B1. Cable Ties B2. Cable Accessories B3.
PAGE 496
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Features and Benefits – Pan-Term ® Disconnects Pan-Term ® Disconnects are fabricated from brass and are electro tin-plated for a long, corrosion resistant operating life. Nylon Fully Insulated Female Receptacles and Male Tabs Type DNF-FIB Available in tab sizes to accommodate .110", .187", .205" or .250" tabs Fully insulated design provides protection from electrical shorts C3.
PAGE 497
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Pan-Term ® Disconnects (continued) Nylon Barrel Insulated Female Receptacles and Male Tabs Type DNF Available in tab sizes to accommodate .110", .187", .205" or .250" tabs Maximum insulation temperature 194°F (90°C) Vinyl Barrel Insulated Female Receptacles and Male Tabs Type DV and DVF B1. Cable Ties B2. Cable Accessories Available in tab sizes to accommodate .187", .205", or .250" tabs B3. Stainless Steel Ties C1.
PAGE 498
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Pan-Term ® Disconnects B1. Cable Ties Material B2. Cable Accessories Style Feature Type Page Number Female Female Female Female Female Male Male Female Right Angle Female Right Angle Funnel Entry, Ins. Grip DNG-FB Funnel, Ins. Grip, Locking DNG-FL Funnel, Ins. Support, Two-Pc. DNF-FIB Funnel, Ins. Support, Three-Pc. DNF-FI Funnel Entry, Premium Nylon DPF-FIB Funnel, Ins. Support, Two-Pc. DNF-FIM Premium Nylon DPF-FIM Funnel Entry, Ins.
PAGE 499
ELECTRICAL SOLUTIONS A. System Overview Part Number System for Pan-Term ® Disconnects 14 250 Insulation Wire Range Tab Size N 18 = #22 – 18 110 = 0.110 x 0.032 A = Adapter L = 50 14 = #16 – 14 111 = 0.110 x 0.020 B = Butted Seam C = 100 10 = #12 – 10 145 = 0.145 x 0.032 FB = Metal Insulation Grip, Female D = 500 D NF Type D = Disconnects — = Nylon NF = Nylon, Funnel Entry FIB Special Configuration NFR = Nylon, Funnel Entry, Right Angle 187 = 0.187 x 0.
PAGE 500
ELECTRICAL SOLUTIONS A. System Overview Disco-Lok ™ Female Disconnect, Nylon Fully Insulated – Funnel Entry B1. Cable Ties B2. Cable Accessories B3.
PAGE 501
ELECTRICAL SOLUTIONS A. System Overview Female Disconnect, Nylon Fully Insulated – Funnel Entry B1. Cable Ties Type DNF-FIB • Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost • Fully insulated design provides protection from electrical shorts • Internal wire stop assures proper length of insertion into terminal barrel, providing a higher quality connection Figure Max. Dimensions (In.) Ins. L W H (In.) 0.120 0.71 0.19 0.16 Tab Size (In.) 0.
PAGE 502
ELECTRICAL SOLUTIONS A. System Overview DiscoGrip™ Male Disconnect, Premium Nylon Fully Insulated – Funnel Entry B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Type DPF-FIM • Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost • Premium nylon insulation retains its shape when crimped and provides a tight grip around the wire insulation for maximum strain relief • Fully insulated design provides protection from electrical shorts C1.
PAGE 503
ELECTRICAL SOLUTIONS A. System Overview Heat Shrink Disconnects, Fully Insulated – Funnel Entry B1.
PAGE 504
ELECTRICAL SOLUTIONS A. System Overview Female Disconnect, Vinyl Barrel Insulated – Funnel Entry B1. Cable Ties B2. Cable Accessories B3.
PAGE 505
ELECTRICAL SOLUTIONS A. System Overview Female Disconnect, Non-Insulated – Metal Sleeve B1.
PAGE 506
ELECTRICAL SOLUTIONS A. System Overview Right Angle Female Disconnect, Nylon Insulated – Funnel Entry B1. Cable Ties B2. Cable Accessories Type DNFR-B • Right angle design for use in limited space applications • Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost • Longer barrel design for use with Panduit standard disconnect tool B3. Stainless Steel Ties Part Number DNFR18-205B-L C1.
PAGE 507
ELECTRICAL SOLUTIONS A. System Overview Right Angle Female Disconnect Non-Insulated B1. Cable Ties Type DR-B • Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost • Barrel of terminal internally beveled to provide quick and easy wire insertion • Internal barrel serrations assure good wire contact and maximum tensile strength Part Number DR18-205B-C Wire Range H 0.12 D 0.53 0.54 0.25 0.12 0.53 0.205/0.187 x 0.020 DR18-250B-C 0.55 0.30 0.
PAGE 508
ELECTRICAL SOLUTIONS A. System Overview Male Disconnect, Nylon Barrel Insulated – Funnel Entry B1. Cable Ties B2. Cable Accessories Type DNF-M B3. Stainless Steel Ties Wire Range 22 – 18 AWG Color Code Red Max. Ins. (In.) 0.136 Figure Dimensions (In.) DNF14-250M-C 16 – 14 AWG Blue 0.162 0.90 0.250 x 0.032 DNF10-250M-L* 12 – 10 AWG Yellow 0.230 1.03 0.250 x 0.032 Part Number DNF18-250M-C C1. Wiring Duct C2.
PAGE 509
ELECTRICAL SOLUTIONS A. System Overview Male Disconnect, Non-Insulated – Butted Seam B1. Cable Ties Type D-MB • Male tab couples with (all 0.250 x 0.
PAGE 510
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Specialty Terminals B1. Cable Ties Material B2. Cable Accessories C2. Surface Raceway C3. Abrasion Protection Vinyl Pin Terminal Blade Terminal Insulation Support Insulation Support PV-P DV-M D1.54 D1.55 Non-Insulated Pin Terminal Blade Terminal Brazed Seam Brazed Seam P-P D-M D1.54 D1.
PAGE 511
ELECTRICAL SOLUTIONS A. System Overview Male Blade Adapter, Vinyl Insulated – Funnel Entry B1.
PAGE 512
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Pan-Term ® Metric Disconnects Metric Nylon Fully Insulated Female and Male Tabs Type DMNF-FIB B1. Cable Ties B2. Cable Accessories Available in tab sizes to accommodate 2.8, 4.8, and 6.3mm tabs Fully insulated design provides protection from electrical shorts B3. Stainless Steel Ties C3. Abrasion Protection C4. Cable Management Available in tab sizes to accommodate 2.8, 4.8, and 6.
PAGE 513
ELECTRICAL SOLUTIONS A. System Overview Part Number System for Pan-Term ® Metric Disconnects DM NF Type N DM = Disconnect Metric 1 Wire Range Insulation = Nylon NF = Nylon Funnel V — = Vinyl = Non-Insulated (leave blank) 285 FIB 1 = 0.5 – 1.0mm2 (22 – 18 AWG) Size and Type 285 = 2.8mm x 0.5mm (0.110 x 0.020) 2 = 1.5 – 2.5mm2 (16 – 14 AWG) 6 = 4.0 – 6.0mm2 (12 – 10 AWG) — Special Configuration C Package Size B = Butted Seam, Female X = 10 288 = 2.8mm x 0.8mm (0.110 x 0.
PAGE 514
ELECTRICAL SOLUTIONS A. System Overview Female Metric Disconnect, Nylon Barrel Insulated – Funnel Entry B1. Cable Ties Type DMNF B2. Cable Accessories • Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost • Metal insulation grip sleeve crimps to wire insulation, providing protection to the crimp joint during high vibration applications • Internal barrel serrations assure good wire contact and maximum tensile strength B3.
PAGE 515
ELECTRICAL SOLUTIONS A. System Overview Piggyback Metric Disconnect, Vinyl Barrel Insulated B1.
PAGE 516
ELECTRICAL SOLUTIONS A. System Overview Male Metric Disconnect, Non-Insulated – Butted Seam B1. Cable Ties B2. Cable Accessories Type DM-M • Barrel of terminal internally beveled to provide quick and easy wire insertion • Maximum recommended operating temperature 302°F (150°C) • Rated up to 2000 V • Male tab couples with (all 6.3mm x 0.
PAGE 517
ELECTRICAL SOLUTIONS A. System Overview PAN-TERM ® SPLICES Panduit ® Pan-Term ® Splices are designed and manufactured for fast assembly, and long reliable performance. As the demand for splices increases, it becomes essential to provide a complete system for termination products.We provide an extensive line of tooling designed specifically to provide optimum performance when used as a system for terminating. B1. Cable Ties B2. Cable Accessories B3.
PAGE 518
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Features and Benefits – Pan-Term ® Splices and Wire Joints Non-Insulated Wire Joints Type J Only one crimp needed to complete splice Maximum recommended operating temperature 302°F (150°C) B3. Stainless Steel Ties Non-Insulated Parallel Splices Type PS Seamless tubular barrel provides consistent high performance quality crimps Maximum recommended operating temperature 302°F (150°C) C1. Wiring Duct C2.
PAGE 519
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Pan-Term ® Splices Internal wire stops assure proper insertion length B1. Cable Ties Vinyl Butt Splices Type BSV Nylon Butt Splices Type BSN Maximum insulation temperature 221°F (105°C) Maximum insulation temperature 221°F (105°C) Internal wire stops assure proper insertion, length B3. Stainless Steel Ties Expanded wire entry accommodates larger insulation Brazed seam assures crimp reliability B2. Cable Accessories C1.
PAGE 520
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Pan-Term ® Splices and Wire Joints B1. Cable Ties Style Feature Type Page Number Nylon Butt Splice Parallel Splice Wire Joint Brazed Seam BSN Seamless Barrel PSN Multiple Wire Connector JN D1.65 D1.66 D1.67 Vinyl Butt Splice Expanded Insulation BSV D1.65 Heat Shrink Butt Splice Heat Shrink Insulation BSH D1.68 Butt Splice Parallel Splice Wire Joint Brazed Seam Seamless Barrel BS PS J D1.66 D1.67 D1.68 Material B2.
PAGE 521
ELECTRICAL SOLUTIONS A. System Overview Butt Splice, Nylon Insulated B1. Cable Ties Type BSN • Designed to splice two solid or stranded wires together to repair or lengthen wires • Butted configuration provides low profile for limited space applications • Brazed seam protects terminal barrel from splitting during the crimp process Part Number BSN22-C* Wire Range 26 – 22 AWG Color Code Yellow Max. Ins. (In.) 0.080 Figure Dimensions (In.) BSN18-C 22 – 18 AWG Red 0.115 1.
PAGE 522
ELECTRICAL SOLUTIONS A. System Overview Butt Splice, Non-Insulated B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Type BS • Designed to splice two solid or stranded wires together to repair or lengthen wires • Butted configuration provides low profile for limited space applications • Brazed seam protects terminal barrel from splitting during the crimp process C1.
PAGE 523
ELECTRICAL SOLUTIONS A. System Overview Parallel Splice, Non-Insulated B1.
PAGE 524
ELECTRICAL SOLUTIONS A. System Overview Wire Joint, Non-Insulated B1. Cable Ties B2. Cable Accessories Type J • Large barrel, designed to accommodate from one to seven wires with just one crimp • Accommodates multiple wire sizes in varying combinations • Non-insulated barrel can be used to provide an economical termination when insulation is not required B3.
PAGE 525
ELECTRICAL SOLUTIONS A. System Overview Metric Butt Splice, Non-Insulated B1.
PAGE 526
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories PAN-TERM ® FERRULES Panduit® Pan-Term ® Ferrule end sleeves terminate stranded wire into terminal blocks with superior termination performance. A wide assortment of ferrule styles and tool designs provide a proven way to make reliable connections, especially for limited space applications.Insulation flare allows for ease of wire insertion and eliminates loose strands of wire.
PAGE 527
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Pan-Term ® Ferrules Panduit ferrules are available for wiring applications from #26 – 1 AWG. Offerings include insulated and non-insulated ferrules, in single-wire or double-wire configurations. Insulated ferrules are color-coded to DIN or French standards. Crimped on the metal barrel these ferrules provide improved performance for terminal block and panel building applications.
PAGE 528
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Pan-Term ® Ferrules B1. Cable Ties Material B3. Stainless Steel Ties Type Page Number Style Feature Polypropylene Ferrules, Single Wire Ferrules, Single Wire Ferrules, Single Wire Ferrules, Twin Wire DIN Color Code French Color Code On Strips DIN Color Code FSD FSF FS FTD D1.73 D1.74 D1.75 D1.75 Non-Insulated Ferrules Seamless Tube F D1.76, D1.77 B2. Cable Accessories C1. Wiring Duct Ferrules C2. Surface Raceway C3.
PAGE 529
ELECTRICAL SOLUTIONS A. System Overview Insulated Ferrules – Single Wire DIN End Sleeve Type FSD • • • • Polypropylene insulation housing conforms to DIN color requirements Meets DIN standards for single wire containment Funnel entry for faster insertion and lower installed cost Designed with a seamless barrel to contain loose wire strands for superior terminations B2. Cable Accessories L P Max. Wire Insul. Dia. Wire Size Part Number FSD72-6-D FSD72-8-D AWG mm2 Color Code 26 AWG 0.14 Gray 0.
PAGE 530
ELECTRICAL SOLUTIONS A. System Overview Insulated Ferrules – Single Wire French End Sleeve Type FSF B1. Cable Ties B2. Cable Accessories • • • • Polypropylene insulation housing conforms to French color requirements Meets DIN standards for single wire containment Funnel entry for faster insertion and lower installed cost Designed with a seamless barrel to contain loose wire strands for superior terminations L C1. Wiring Duct Part Number FSF72-6-D FSF72-8-D AWG 26 AWG FSF74-6-D 0.25 0.
PAGE 531
ELECTRICAL SOLUTIONS A. System Overview Insulated Ferrules – Twin Wire DIN End Sleeve Type FTD • • • • Meets DIN standards for twin wire containment Polypropylene insulation housing conforms to DIN color requirements Funnel entry for faster insertion and lower installed cost Designed with a seamless barrel to contain loose wire strands for superior terminations B1.
PAGE 532
ELECTRICAL SOLUTIONS A. System Overview Ferrules, Non-Insulated B1. Cable Ties B2. Cable Accessories Type F • Designed with a seamless barrel to contain loose wire strands for superior terminations • Eases insertion of wire into terminal block • Meets DIN standards for wire containment • Suitable for limited space panel applications • Multiple pin lengths available for a variety of terminal blocks B3. Stainless Steel Ties L ID C1. Wiring Duct OD C2. Surface Raceway C3. Abrasion Protection C4.
PAGE 533
ELECTRICAL SOLUTIONS A. System Overview Ferrules, Non-Insulated (continued) B1.
PAGE 534
ELECTRICAL SOLUTIONS A. System Overview Ferrule Assortment Kits B1. Cable Ties • Large selection of ferrules in a convenient compact case • Plastic case is both durable and reusable keeping ferrules organized and separated B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Part Number KP-FSD1 Part Description Ferrule kit includes: #24 – 18 AWG insulated DIN ferrules. Case includes: 30 pieces each of FSD73-6, FSD74-6, FSD75-8, FSD76-8 and FSD77-8.
PAGE 535
ELECTRICAL SOLUTIONS A. System Overview TERMINAL CRIMPING TOOLS Panduit offers a wide assortment of tools to provide solutions for installing terminals, disconnects,splices,ferrules and lugs. Panduit installation tools provide quality performance and ease of installation at the lowest installed cost.The long-term reliability of Panduit installation tools provides the highest level of service to meet customer requirements. B1. Cable Ties B2. Cable Accessories B3.
PAGE 536
ELECTRICAL SOLUTIONS A. System Overview Crimping Guidelines for Panduit ® Pan-Term ® Terminals, Disconnects, Splices and Wire Joints B1. Cable Ties 1. Select the proper Panduit terminal for the application and wire size used B2. Cable Accessories B3.
PAGE 537
ELECTRICAL SOLUTIONS A. System Overview Crimping Guidelines for Panduit ® Pan-Term ® Terminals, Disconnects, Splices and Wire Joints (continued) B1. Cable Ties Non-Insulated Terminals and Disconnects B2. Cable Accessories A. Locate terminal in appropriate wire gauge crimp die pocket with indenter centered on barrel seam. B. Rotate terminal so tongue is level with crimp die. C.
PAGE 538
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Crimping Guidelines for Panduit ® Pan-Term ® Terminals, Disconnects, Splices and Wire Joints (continued) Insulated and Non-Insulated Wire Joints B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management A. Properly strip wires per manufacturer’s recommendations on product package label. B. Twist stripped wire ends together and insert wires into wire joint. C.
PAGE 539
ELECTRICAL SOLUTIONS A. System Overview Hand Operated Plier Type Tools • Installer controlled crimp • Available with wire stripping and cutting features Part Number CT-260 CT-260 CT-200 CT-200 B1. Cable Ties • Plier type crimp for #22 – 10 AWG insulated and non-insulated terminal products Part Description Crimps most Panduit #22 – 10 AWG insulated and non-insulated terminals. Forged steel tool. Cuts wire. Forged steel tool.
PAGE 540
ELECTRICAL SOLUTIONS A. System Overview Contour Crimp ™ Controlled Cycle Tools B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct • Controlled cycle mechanism assures high quality, consistent terminations • Ergonomic tool design assures operator comfort, safety, and performance CT-1525 Std. Pkg. Qty. 1 Part Number CT-1525 Part Description Crimps Panduit #26 – 22 AWG insulated terminals and splices, #22 – 10 AWG fully insulated disconnects and insulated parallel splices.
PAGE 541
ELECTRICAL SOLUTIONS A. System Overview Controlled Cycle Crimping Tools • Specialty crimping tools for fully insulated right angle disconnects and heat shrink insulated terminals, disconnects, and splices Part Number CT-300-1 Part Description Crimps Panduit #22 – 14 AWG fully insulated right angle disconnects (DNFR-FIB series). CT-310 Blue handle tool crimps Panduit #22 – 10 AWG heat shrink insulated terminals, disconnects, and splices. CT-300-1 B1.
PAGE 542
ELECTRICAL SOLUTIONS A. System Overview Semiautomatic Ferrule Crimping Tool CT-1000 B1. Cable Ties B2. Cable Accessories • Innovative rapid load design utilizes continuously molded ferrules to significantly reduce installation time • Controlled cycle tool cuts, strips, and crimps wire to maximize efficiency Part Number CT-1000 B3.
PAGE 543
ELECTRICAL SOLUTIONS A. System Overview Die Type, Manual, Crimping Tool • High quality, durable tool construction provides long term dependability • Develops 6 tons of crimping force, crimps copper compression lugs and splices up to 500 kcmil Part Number CT-720 B1.
PAGE 544
ELECTRICAL SOLUTIONS A. System Overview CT-2500 Battery Powered Crimping Tool B1. Cable Ties B2. Cable Accessories • Quick two-second crimping cycle results in less time to crimp terminals compared to conventional methods • Lightweight 3.3 lb. design provides maximum productivity and ease of use in continuous workflow operations Part Number B3. Stainless Steel Ties C1.
PAGE 545
ELECTRICAL SOLUTIONS A. System Overview CT-2600 Battery Powered Hydraulic, 4 Ton, Crimping Tool • Battery powered hydraulic design delivers quick termination of #8 – 2 AWG large wire insulated and non-insulated ring terminals • Quick 4 second crimping cycle results in less time to crimp terminals compared to conventional methods • Compact, portable, and lightweight (3.5 lbs.
PAGE 546
ELECTRICAL SOLUTIONS Tooling Selection Guide for Panduit Terminals, Splices, and Disconnects Heat shrink splices BSN Nylon insulated butt splices BSV Vinyl insulated butt splices C3. Abrasion Protection D, DR C4. Cable Management D-M Non-insulated male blade adapters D-M Non-insulated male disconnects Non-insulated right angle female disconnects and noninsulated male butted seam disconnects Nylon, funnel entry, barrel insulated disconnects (not .110/.111) D1. Terminals D2.
PAGE 547
ELECTRICAL SOLUTIONS A.
PAGE 548
ELECTRICAL SOLUTIONS Tooling Selection Guide for Panduit Terminals, Splices, and Disconnects (continued) C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3.
PAGE 549
ELECTRICAL SOLUTIONS A.
PAGE 550
ELECTRICAL SOLUTIONS A. System Overview Tooling Selection Guide for Panduit Ferrules B1. Cable Ties B2. Cable Accessories Controlled Cycle Hand Tools Panduit Ferrule Series Ferrule Description F Non-insulated ferrules B3. Stainless Steel Ties C1. Wiring Duct FSD, FSF C2. Surface Raceway C3. Abrasion Protection C4.
PAGE 551
ELECTRICAL SOLUTIONS A. System Overview Technical Specification and Selection Information The following pages provide information helpful in specifying Panduit terminals and selecting the appropriate terminal and tooling for your applications. B2. Cable Accessories Panduit Terminal Approvals Logo (Symbol) Agency Underwriters Laboratories, Inc.
PAGE 552
ELECTRICAL SOLUTIONS A. System Overview Performance Requirements B1. Cable Ties #26 #24 #22 Wire Size (AWG) #20 #18 #16 #14 #12 #10 UL 486A (TERMINALS), UL 310 (MALE BLADE ADAPTERS) B2. Cable Accessories Test Current for Max. 50°C Rise (Amps) Min. Tensile Strength* (Lbs.) • UL 486A (Terminals) 3.5 7 9 12 17 18 30 35 50 • UL 486C (Splices) 3 5 8 13 20 30 50 70 80 • UL 310 (Blade Adapters) 5.5 7 9 12 17 18 30 35 50 3 5 8 10 10 15 25 35 40 UL 486C (SPLICES) B3.
PAGE 553
ELECTRICAL SOLUTIONS A. System Overview Stud Size Chart (Inches/Millimeters) B1. Cable Ties Standard Stud Size Metric Stud Size (mm) Stud Size Decimal Equivalent #2 #4 #5 #6 #8 #10 1/4" 5/16" 3/8" 7/16" M2 M2.5 M3 M.35 M4 M5 M6 M8 M10 M11 .086" .112" .127" .138" .164" .190" .250" .312" .375" .438" Metric Diameter (mm) 2.18 2.84 3.18 3.51 4.17 4.83 6.35 7.92 9.53 11.13 Terminal Hole Diameter .090" .118" .130" .147" .173" .204" .270" .343" .392"* .406"** .
PAGE 554
ELECTRICAL SOLUTIONS A. System Overview Equivalent Tables B1. Cable Ties Decimal/Inches/Millimeters B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management Common Conductor Size Chart (Stranded Wire) Individual Strand Size D1. Terminals Size D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F.
PAGE 555
ELECTRICAL SOLUTIONS A. System Overview Common Conductor Sizes and Strandings Reference Chart Conductor AWG Metric mm2 No. Overall Conductor Size Diameter Area mm In. mm In. Circ. MILS Conductor AWG Individual Strands Diameter Metric mm2 No. Overall Conductor Size Diameter Area mm In. mm In. Circ. MILS 0.05 25 0.05 0.002 0.25 0.010 97 19 0.25 0.010 1.30 0.051 1841 0.06 41 0.05 0.002 0.36 0.014 159 1 1.13 0.044 1.13 0.044 1979 26 24 0.25 22 0.38 0.5 20 0.
PAGE 556
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Common Conductor Sizes and Strandings Reference Chart (continued) Conductor AWG B3. Stainless Steel Ties C1. Wiring Duct Individual Strands Diameter Metric mm2 No. mm In. Overall Conductor Size Diameter Area mm In. Circ. MILS Conductor AWG Individual Strands Diameter Metric mm2 No. Overall Conductor Size Diameter Area mm In. mm In. Circ. MILS 19 2.57 0.101 12.8 0.505 187500 37 1.83 0.072 12.5 0.
PAGE 557
ELECTRICAL SOLUTIONS A. System Overview REEL SMART ™ SYSTEM The Panduit ® Reel Smart ™ System provides the best solution for quality, high volume terminations designed to dramatically reduce set-up time and production downtime. This increased efficiency translates into real cost savings throughout the termination process from start to finish.
PAGE 558
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway Features and Benefits – Reel Smart ™ Termination System The Panduit continuously molded Reel Smart ™ products are designed such that the terminal, disconnect, and butt splice housings are connected by an integral molded carrier in the barrel crimp zone, producing a continuous length of product.
PAGE 559
ELECTRICAL SOLUTIONS A.
PAGE 560
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 561
ELECTRICAL SOLUTIONS A. System Overview Ring Terminals, Vinyl Insulated – Funnel Entry Type PV-RB • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Ring tongue design assures a secure connection in high vibration applications • Insulation support helps to prevent wire damage in bending applications • UL Flammability UL 94V-0, maximum insulation temperature 221°F (105°C) • UL and CSA rated up 600 V per UL 486A/B L B1.
PAGE 562
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 563
ELECTRICAL SOLUTIONS A.
PAGE 564
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 565
ELECTRICAL SOLUTIONS A. System Overview Fork Terminals, Vinyl Insulated – Funnel Entry Type PV-FB • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Fork design provides for fast and easy installation, without the need to remove fastener B1.
PAGE 566
ELECTRICAL SOLUTIONS A. System Overview Locking Fork Terminals, Nylon Insulated – Non-Funnel Entry Type PN-LF B1. Cable Ties B2. Cable Accessories B3.
PAGE 567
ELECTRICAL SOLUTIONS A. System Overview Locking Fork Terminals, Vinyl Insulated – Funnel Entry Type PV-LFB • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Snap in place for secure connection • Fork design provides for fast and easy installation, without the need to remove fastener B1.
PAGE 568
ELECTRICAL SOLUTIONS A. System Overview Short Locking Fork Terminals, Nylon Insulated – Non-Funnel Entry Type PN-SLF B1. Cable Ties B2. Cable Accessories B3.
PAGE 569
ELECTRICAL SOLUTIONS A. System Overview Short Locking Fork Terminals, Vinyl Insulated – Funnel Entry Type PV-SLFB • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Lock in place for a secure connection in limited spaces • Fork design provides for fast and easy installation, without the need to remove fastener B1.
PAGE 570
ELECTRICAL SOLUTIONS A. System Overview Flanged Fork Terminals, Nylon Insulated – Funnel Entry Type PNF-FF B1. Cable Ties B2.
PAGE 571
ELECTRICAL SOLUTIONS A.
PAGE 572
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 573
ELECTRICAL SOLUTIONS A.
PAGE 574
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 575
ELECTRICAL SOLUTIONS A.
PAGE 576
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 577
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Reel Smart ™ Disconnects Supra-Grip ™ Nylon Fully Insulated Funnel Entry, Female Receptacle Type DNG-FB Available in tab sizes to accommodate .187" or .250" tabs Fully insulated design provides protection from electrical shorts Disco-Lok ™ Nylon Fully Insulated, Funnel Entry, Female Receptacle Type DNG-FL Available in tab sizes to accommodate .
PAGE 578
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Part Number System for Reel Smart ™ Disconnects FIB NF 14 Type Insulation Wire Range D = Disconnects NF 18 = #22 – 18 110 = 0.110 x 0.032 tab size B = Butted seam K 14 = #16 – 14 111 = 0.110 x 0.020 tab size C KD = 1,500 10 = #12 – 10 Nylon Funnel Entry Metal Insulation Grip 145 = 0.145 x 0.
PAGE 579
ELECTRICAL SOLUTIONS A.
PAGE 580
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 581
ELECTRICAL SOLUTIONS A.
PAGE 582
ELECTRICAL SOLUTIONS A. System Overview DiscoGrip ™ Female Disconnects, Fully Insulated Type DPF-FIB B1. Cable Ties B2. Cable Accessories B3.
PAGE 583
ELECTRICAL SOLUTIONS A.
PAGE 584
ELECTRICAL SOLUTIONS A. System Overview Disco ™ Male Disconnects, Nylon Fully Insulated – Funnel Entry Type DNF-FIM B1. Cable Ties B2. Cable Accessories • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Male tab couples with (all 0.250 x 0.
PAGE 585
ELECTRICAL SOLUTIONS A. System Overview Disco ™ Male Disconnects, Nylon Barrel Insulated – Funnel Entry Type DNF-M • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Male tab couples with (all 0.250 x 0.
PAGE 586
ELECTRICAL SOLUTIONS A. System Overview Pin Terminals, Vinyl Insulated – Funnel Entry Type PV-PB B1. Cable Ties B2.
PAGE 587
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Reel Smart ™ Metric Disconnects Metric Supra-Grip Nylon Fully Insulated Female Disconnects Type DMNG-FB ™ Fully insulated design provides protection from electrical shorts Available in tab sizes to accommodate 4.8mm and 6.3mm tabs Metric Disco-Lok Nylon Fully Insulated, Funnel Entry, Female Receptacle Type DMNG-FL ™ Available in tab sizes to accommodate 6.
PAGE 588
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Part Number System for Reel Smart ™ Metric Disconnects DM NF 1 Type Insulation Wire Range D = Disconnect Metric B3. Stainless Steel Ties N = Nylon NF = Nylon Funnel Entry V = 285 FIB 3K Size and Type Special Configuration Std. Pkg. Size — 1 = 0.5 – 1.0mm 2 = 1.5 – 2.5mm 2 283 = 2.8mm x 0.3mm Tab Size 2 285 = 2.8mm x 0.
PAGE 589
ELECTRICAL SOLUTIONS A. System Overview Metric Disco-Lok ™ Female Disconnects, Nylon Fully Insulated – Funnel Entry B1.
PAGE 590
ELECTRICAL SOLUTIONS A. System Overview Metric Disco ™ Female Disconnect, Nylon Fully Insulated – Expanded Wire Entry B1. Cable Ties Type DMNF-FIBX B2. Cable Accessories • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Expanded wire entry designed to accommodate wire with a larger insulation thickness • Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost B3.
PAGE 591
ELECTRICAL SOLUTIONS A. System Overview Metric Disco ™ Female Disconnects, Vinyl Barrel Insulated – Funnel Entry B1.
PAGE 592
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 593
ELECTRICAL SOLUTIONS A. System Overview Metric Disco Male Disconnects, Nylon Fully Insulated – Expanded Wire Entry ™ Type DMNF-FIMX • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Expanded wire entry designed to accommodate wire with a larger insulation thickness • Male tab couples with (all 6.3mm x 0.
PAGE 594
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 595
ELECTRICAL SOLUTIONS A.
PAGE 596
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Features and Benefits – Reel Smart ™ Ferrules Panduit ferrules are available in strips and reels for wiring applications from #20 – 14 AWG. Offerings include insulated ferrules in singe wire configurations. These insulated ferrules are color-coded to DIN standards. Insulated Ferrules – Single Wire Type FS and FSD B2. Cable Accessories Seamless tubular barrel provides consistent quality crimps B3.
PAGE 597
ELECTRICAL SOLUTIONS A.
PAGE 598
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Semiautomatic Ferrule Crimping Tool – CT-1000 • Innovative rapid load design utilizes continuously molded ferrules to significantly reduce installation time • Controlled cycle tool cuts, strips, and crimps wire to maximize efficiency Part Number CT-1000 B3.
PAGE 599
ELECTRICAL SOLUTIONS A.
PAGE 600
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Electric Bench Press • For use with Panduit Applicators and Reel Smart ™ Continuously Molded Terminals and Ferrules to provide a superior solution for quality, high volume terminations • CP-871 press has a microprocessor based controller and LCD that displays text messages and cycle count with multi-language capability B3. Stainless Steel Ties Part Number CP-871 C1.
PAGE 601
ELECTRICAL SOLUTIONS A. System Overview Die Information Part Number CD-800-1 CD-800-1D*** CD-800-2 CD-800-2D*** CD-800-3 AWG Wire Range 22 – 18, 22 – 16 60/40 Solder Slug Dia. Color Code (1) Wire Insulation Strain Relief Red Plastic Ins. Crimp, Insulation Support, Metal Ins. Crimp, Plastic Ins. Crimp PV, DV-MB, DV-B, BSN, PN, PNF, DNF-M, BSP (Premium Nylon) Blue Plastic Ins. Crimp, Insulation Support, Metal Ins. Crimp, Plastic Ins.
PAGE 602
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Die Information (continued) 60/40 Solder Slug Diameter Part Number CD9-1A CD9-1AD*** Color Code AWG Wire Range Wire Insulation Strain Relief Part No. Prefix In. mm 22 – 16, 22 – 18 Insulation Support, Plastic Ins. Crimp, Plastic Ins. Crimp, Metal Ins. Grip BSN, BSP, PV, DV-B, DV-MB, PN, PNF, DNF-M 0.188 4.
PAGE 603
ELECTRICAL SOLUTIONS A.
PAGE 604
ELECTRICAL SOLUTIONS A. System Overview Performance Requirements Wire Size (AWG) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties #26 #24 #22 #20 #18 #16 #14 #12 #10 UL 486A (Terminals), UL 310 (Male Blade Adapters) Test current for max. 50° rise (amps) Min. tensile strength* (lbs.) 3.5 7 9 12 17 18 30 35 50 3 5 8 13 20 30 50 70 80 5.5 7 9 12 17 18 30 35 50 3 5 8 10 10 15 25 35 40 UL 486C (Splices) Test current for max. 50°C rise (amps) Min.
PAGE 605
ELECTRICAL SOLUTIONS A. System Overview NOTES B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S.
PAGE 606
ELECTRICAL SOLUTIONS A. System Overview Compression Connector Reference Information B1. Cable Ties B2. Cable Accessories Selection Guide ELECTRICAL SOLUTIONS A. System Overview Selection Guide – PAN-LUG ™ Copper Compression Connectors for Copper Code Conductor Connector Type Short barrel with inspection window LCAS LCAS-H 45° bent LCAS-F 90° bent D2.6, D2.7 D2.8, D2.9 D2.10, D2.11 LCA LCA-H 45° bent LCA-F 90° bent LCAN narrow tongue LCA-00 blank tongue D2.12, D2.13 D2.14, D2.15 D2.16, D2.17 D2.
PAGE 607
ELECTRICAL SOLUTIONS A. System Overview PAN-LUG ™ COMPRESSION CONNECTORS Panduit® Pan-Lug ™ Compression Connectors provide permanent terminations for a variety of power and grounding applications, with innovation, highest reliability, and lowest installed cost. Panduit offers the first and only copper compression lugs and splices that meet Network Equipment-Building Systems (NEBS) Level 3 requirements as tested by Telcordia Technologies.
PAGE 608
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – Pan-Lug™ Compression Connectors B1. Cable Ties Bolded features are unique to Panduit. Copper Lugs B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2.
PAGE 609
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Pan-Lug™ Copper Compression Connectors for Copper Code Conductor Connector Barrel Style Type Short Barrel with Inspection Window LCAS LCAS-H 45° bent LCAS-F 90° bent D2.7, D2.8 D2.9, D2.10 D2.11, D2.12 LCA LCA-H 45° bent LCA-F 90° bent LCAN narrow tongue LCA-00 blank tongue D2.13, D2.15, D2.17, D2.19, Long Barrel no Inspection Window LCB LCB-H 45° bent LCB-F 90° bent LCBH with corona relief taper D2.22, D2.23 D2.24, D2.25 D2.26, D2.27 D2.
PAGE 610
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Selection Guide – Pan-Lug™ Copper Compression Connectors for Copper Code and/or Flex Conductor Code B2. Cable Accessories Connector Flex Barrel Style Type Page Number Standard Barrel with Inspection Window Code and Flex LCAX LCAX-H 45° bent LCAX-F 90° bent LCAXN narrow tongue D2.66, D2.67 D2.68, D2.69 D2.70, D2.71 D2.72 LCAF LCAF-H 45° bent LCAF-F 90° bent D2.73, D2.74 D2.75, D2.76 D2.77, D2.78 LCBX LCBX-H 45° bent LCBX-F 90° bent D2.
PAGE 611
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Pan-Lug™ Aluminum Compression Connectors for Aluminum or Copper Code Conductor Connector Type One-Hole Lugs LAA B1. Cable Ties Page Number D2.112 B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Two-Hole Lugs LAB D2.113 C2. Surface Raceway C3. Abrasion Protection Butt Splices SA D2.115 C4. Cable Management D1. Terminals Reducing Splices SAR D2.116 D2. Power Connectors D3.
PAGE 612
ELECTRICAL SOLUTIONS A. System Overview Part Number System for Pan-Lug ™ Compression AWG Lugs B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection LCD 2/0 Type Conductor Size Ex: LCD Lug, Copper Two-Hole Standard Barrel — 38 D F Stud Hole Size Two Stud Hole Spacing Tongue Angle Standard Package Size 10 = #10 A = .625" H = 45° Angle 1 =1 14 = 1/4" B = .750" F = 90° Angle 2 =2 56 = 5/16" C = .
PAGE 613
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Short Barrel with Window Lug B1.
PAGE 614
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Short Barrel with Window Lug (continued) B1. Cable Ties B2. Cable Accessories W 0.96 B 0.83 T 0.13 5/16 0.96 0.83 3/8 0.96 0.83 LCAS3/0-12-X 1/2 0.96 LCAS4/0-14-X 1/4 1.06 LCAS3/0-56-X LCAS3/0-38-X B3. Stainless Steel Ties 3/0 AWG LCAS4/0-56-X C1. Wiring Duct C3. Abrasion Protection L 1.97 Panduit Color Code Orange Panduit Die Index No.‡ P50 Burndy Die Index No.‡ 14 T&B Die Index No.‡ 50 Wire Strip Length (In.
PAGE 615
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Short Barrel with Window Lug, 45° Angle B1.
PAGE 616
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Code Conductor, One-Hole, Short Barrel with Window Lug, 45° Angle (continued) L 1.68 Panduit Color Code Orange Panduit Die Index No.‡ P50 Burndy Die Index No.‡ 14 T&B Die Index No.‡ 50 Wire Strip Length (In.) 7/8 Std. Pkg. Qty. 10 W 0.96 B 0.83 T 0.13 5/16 0.96 0.83 3/8 0.96 0.83 0.13 1.68 Orange P50 14 50 7/8 10 0.13 1.74 Orange P50 14 50 7/8 LCAS3/0-12H-X 1/2 0.96 10 0.83 0.13 1.
PAGE 617
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Short Barrel with Window Lug, 90° Angle B1.
PAGE 618
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Code Conductor, One-Hole, Short Barrel with Window Lug, 90° Angle (continued) W 0.96 B 0.83 T 0.13 5/16 0.96 0.83 3/8 0.96 0.83 LCAS3/0-12F-X 1/2 0.96 LCAS4/0-14F-X 1/4 1.06 LCAS3/0-56F-X B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway LCAS3/0-38F-X 3/0 AWG LCAS4/0-56F-X L 1.67 Panduit Color Code Orange Panduit Die Index No.‡ P50 Burndy Die Index No.‡ 14 T&B Die Index No.
PAGE 619
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Standard Barrel with Window Lug B1.
PAGE 620
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Standard Barrel with Window Lug (continued) B1. Cable Ties B2. Cable Accessories W 0.76 B 0.94 T 0.12 5/16 0.76 0.94 3/8 0.76 0.94 LCA1/0-12-X 1/2 0.80 LCA2/0-14-X 1/4 LCA2/0-56-X LCA1/0-56-X LCA1/0-38-X B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D3. Grounding Connectors E1. Labeling Systems E2. Labels E4. Permanent Identification E5.
PAGE 621
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Standard Barrel with Window Lug, 45° Angle For Use with Stranded Copper Conductors B1.
PAGE 622
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Standard Barrel with Window Lug, 45° Angle (continued) B1. Cable Ties B2. Cable Accessories W 0.70 B 0.88 T 0.11 5/16 0.70 0.88 3/8 0.70 0.88 LCA1-12H-E 1/2 0.75 LCA1/0-14H-X 1/4 LCA1/0-56H-X LCA1-56H-E LCA1-38H-E B3. Stainless Steel Ties LCA1/0-38H-X C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D3. Grounding Connectors E1. Labeling Systems E2. Labels E3.
PAGE 623
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Standard Barrel with Window Lug, 90° Angle For Use with Stranded Copper Conductors B1.
PAGE 624
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Standard Barrel with Window Lug, 90° Angle (continued) B1. Cable Ties B2. Cable Accessories L 1.31 Panduit Color Code Green Panduit Die Index No.‡ P37 Burndy Die Index No.‡ 11 T&B Die Index No.‡ 37 Wire Strip Length (In.) 15/16 Std. Pkg. Qty. 20 W 0.70 B 0.88 T 0.11 5/16 0.70 0.88 3/8 0.70 0.88 0.11 1.44 Green P37 11 37 15/16 20 0.11 1.51 Green P37 11 37 15/16 LCA1-12F-E 1/2 0.75 20 0.88 0.09 1.
PAGE 625
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Standard Barrel with Window, Narrow Tongue Lug For Use with Stranded Copper Conductors B1.
PAGE 626
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Standard Barrel with Window, Narrow Tongue Lug (continued) B1. Cable Ties B2. Cable Accessories L 2.47 Panduit Die Index No.‡ P62 Burndy Die Index No.‡ 16 T&B Die Index No.‡ 62 Wire Strip Length (In.) 1 5/16 Std. Pkg. Qty. 10 0.15 2.55 Yellow P62 16 62 1 5/16 10 1.44 0.16 2.90 White P66 17 66 1 1/2 10 1.44 0.16 2.94 White P66 17 66 1 1/2 10 0.88 1.44 0.17 2.98 Red P71 18 71 1 1/2 10 0.88 1.44 0.
PAGE 627
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Short Blank Tongue, Standard Barrel with Window Lug For Use with Stranded Copper Conductors B1.
PAGE 628
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 629
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Long Barrel Lug (continued) Part Number LCB2/0-38-X LCB2/0-12-X Copper Conductor Size 2/0 AWG LCB3/0-38-X LCB3/0-12-X 3/0 AWG LCB4/0-38-X LCB4/0-12-X 4/0 AWG LCB250-12-X LCB250-78-X 250 kcmil LCB300-56-X LCB300-38-X Figure Dimensions (In.) Stud Hole Size (In.) 3/8 L 2.82 Panduit Color Code Black Panduit Die Index No.‡ P45 Burndy Die Index No.‡ 13 T&B Die Index No.‡ 45 Wire Strip Length (In.) 1 9/16 Std. Pkg. Qty. 10 W 0.
PAGE 630
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 631
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Long Barrel Lug, 45° Angle (continued) Figure Dimensions (In.) L 2.48 Panduit Color Code Purple Panduit Die Index No.‡ P54 Burndy Die Index No.‡ 15 T&B Die Index No.‡ 54 Wire Strip Length (In.) 1 5/8 Std. Pkg. Qty. 10 0.14 2.67 Purple P54 15 54 1 5/8 10 1.61 0.14 2.74 Yellow P62 16 62 1 11/16 10 1.61 0.12 3.27 Yellow P62 16 62 1 11/16 10 1.19 2.24 0.16 3.24 White P66 17 66 2 5/16 10 3/8 1.19 2.
PAGE 632
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 633
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Long Barrel Lug, 90° Angle (continued) Part Number LCB250-12F-X LCB250-78F-X LCB350-12F-X LCB350-78F-X LCB400-58F-6 LCB400-78F-6 Copper Conductor Size 250 kcmil 350 kcmil 400 kcmil LCB500-12F-6 LCB500-58F-6 500 kcmil LCB500-78F-6 LCB600-12F-6 LCB600-58F-6 600 kcmil Figure Dimensions (In.) Stud Hole Size (In.) 1/2 L 2.57 Panduit Color Code Yellow Panduit Die Index No.‡ P62 Burndy Die Index No.‡ 16 T&B Die Index No.
PAGE 634
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 635
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, One-Hole, Long Barrel with Window Lug, 45° Angle For Use with Stranded Copper Conductors B1.
PAGE 636
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 637
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Standard Barrel with Window Lug For Use with Stranded Copper Conductors B1.
PAGE 638
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Standard Barrel with Window Lug (continued) B1. Cable Ties B2. Cable Accessories Part Number LCD1-14A-E LCD1-14B-E C1. Wiring Duct C2. Surface Raceway 0.70 0.88 0.11 2.54 Green P37 11 37 15/16 20 0.70 0.88 0.11 2.79 Green P37 11 37 15/16 20 LCD1-38D-E 3/8 1.00 0.70 0.88 0.11 2.99 Green P37 11 37 15/16 20 LCD1-12-E 1/2 1.75 0.75 0.88 0.09 4.16 Green P37 11 37 15/16 20 LCD1/0-14A-X 1/4 0.
PAGE 639
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Standard Barrel with Window Lug, 45° Angle For Use with Stranded Copper Conductors B1.
PAGE 640
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Standard Barrel with Window Lug, 45° Angle (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway L 2.11 Panduit Color Code Brown Panduit Die Index No.‡ P33 Burndy Die Index No.‡ 10 Part Number LCD2-14AH-Q W 0.60 B 0.88 T 0.10 LCD2-14BH-Q 1/4 0.75 0.60 0.88 LCD2-14DH-Q 1/4 1.00 0.60 0.88 0.10 2.24 Brown P33 10 33 15/16 0.10 2.
PAGE 641
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Standard Barrel with Window Lug, 90° Angle For Use with Stranded Copper Conductors B1.
PAGE 642
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Standard Barrel with Window Lug, 90° Angle (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway Part Number LCD2-14AF-Q C4. Cable Management D1. Terminals 0.60 0.88 0.10 1.99 Brown P33 10 33 15/16 25 1.00 0.60 0.88 0.10 2.24 Brown P33 10 33 15/16 25 5/16 0.75 0.66 0.88 0.10 2.11 Brown P33 10 33 15/16 25 LCD2-38DF-Q 3/8 1.00 0.66 0.88 0.
PAGE 643
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Standard Barrel with Window, Narrow Tongue Lug For Use with Stranded Copper Conductors B1.
PAGE 644
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 645
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Standard Barrel with Window, Narrow Tongue Lug, 90° For Use with Stranded Copper Conductors B1.
PAGE 646
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 647
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Long Barrel Lug For Use with Stranded Copper Conductors B1.
PAGE 648
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Long Barrel Lug (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection Part Number LCC1/0-14A-X D1. Terminals D2. Power Connectors D3. Grounding Connectors E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions W 0.76 B 1.44 T 0.12 L 3.18 Panduit Color Code Pink Panduit Die Index No.
PAGE 649
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Long Barrel Lug, 45° Angle For Use with Stranded Copper Conductors B1.
PAGE 650
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Long Barrel Lug, 45° Angle (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors Part Number LCC1-14AH-E E1. Labeling Systems E4. Permanent Identification W 0.70 B 1.36 T 0.11 L 2.53 Panduit Color Code Green Panduit Die Index No.‡ P37 Burndy Die Index No.‡ 11 T&B Wire Strip Std.
PAGE 651
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Long Barrel Lug, 90° Angle For Use with Stranded Copper Conductors B1.
PAGE 652
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Long Barrel Lug, 90° Angle (continued) B1. Cable Ties B2. Cable Accessories Part Number LCC1-14AF-E C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection D2. Power Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification L 1.94 T&B Wire Strip Std. Die Index Length Pkg. No.‡ (In.) Qty. 37 1 7/16 20 0.75 0.70 1.36 0.11 2.06 Green P37 11 37 1 7/16 20 0.75 0.70 1.
PAGE 653
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Long Barrel with Window Lug For Use with Stranded Copper Conductors B1.
PAGE 654
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Long Barrel with Window Lug (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification Part Number LCC4-10AW-L Copper Figure Conductor No. Size 1 Stud Hole Size (In.
PAGE 655
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Long Barrel with Window Lug (continued) Part Number LCC3/0-14BW-X Copper Figure Conductor No. Size 1 Stud Hole Spacing (In.) .75 W .96 B 1.50 T .13 L 3.39 Panduit Color Code Orange 5/16 1.00 .96 1.50 .13 3.64 Orange P50 14 50 1 9/16 10 3/8 1.00 .96 1.50 .13 3.70 Orange P50 14 50 1 9/16 10 Figure Dimensions (In.) Wire Panduit Burndy T&B Strip Die Index Die Index Die Index Length No.‡ No.‡ No.‡ (In.
PAGE 656
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 657
ELECTRICAL SOLUTIONS Code Conductor, Two-Hole, Long Barrel with Window Lug, 45° Angle (continued) Part Number LCC4-10AWH-L Copper Figure Conductor No. Size 1 Stud Hole Size (In.) #10 Stud Hole Spacing (In.) 0.63 W 0.55 B 1.05 T 0.09 L 2.11 #10 0.75 0.55 1.05 0.09 2.23 Gray P29 8 29 1 1/8 50 1/4 0.63 0.55 1.05 0.09 2.20 Gray P29 8 29 1 1/8 50 1/4 0.75 0.55 1.05 0.09 2.32 Gray P29 8 29 1 1/8 50 1.05 0.08 2.79 Gray P29 8 29 1 1/8 50 Figure Dimensions (In.
PAGE 658
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Long Barrel with Window Lug, 45° Angle (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management Part Number LCC250-56DWH-X Stud Hole Size (In.) 5/16 Stud Hole Spacing (In.) 1.00 W 1.17 B 1.61 T 0.14 L 3.31 3/8 1.00 1.17 1.61 0.14 3.38 Yellow P62 16 62 1 11/16 10 1/2 1.00 1.17 1.61 0.14 3.
PAGE 659
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Long Barrel with Window Lug, 90° Angle For Use with Stranded Copper Conductors B1.
PAGE 660
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Long Barrel with Window Lug, 90° Angle (continued) B1. Cable Ties Part Number LCC4-10AWF-L B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index D2.
PAGE 661
ELECTRICAL SOLUTIONS Code Conductor, Two-Hole, Long Barrel with Window Lug, 90° Angle (continued) Part Number LCC250-56DWF-X ◆ ◆ ◆ ◆ ◆ ◆ Copper Figure Conductor No. Size 1 Stud Hole Size (In.) 5/16 Stud Hole Spacing (In.) 1.00 W 1.17 B 1.61 T 0.14 L 2.83 3/8 1.00 1.17 1.61 0.14 2.90 Yellow P62 16 62 1 11/16 10 Figure Dimensions (In.) Panduit Panduit Burndy T&B Wire Strip Std. Color Die Index Die Index Die Index Length Pkg. Code No.‡ No.‡ No.‡ (In.) Qty.
PAGE 662
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 663
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Blank Tongue, Long Barrel Lug For Use with Stranded Copper Conductors B1.
PAGE 664
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 665
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Short Barrel, Butt Splice For Use with Stranded Copper Conductors B1.
PAGE 666
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 667
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Long Barrel, Butt Splice For Use with Stranded Copper Conductors B1.
PAGE 668
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 669
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Long Barrel, T Splice For Copper-to-Copper Stranded Conductors B1.
PAGE 670
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Code Conductor, Color-Coded Parallel Splice For Use with Stranded Copper Conductors Type PSC B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Figure Dimensions (In.) Part Number PSCRED-L C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1.
PAGE 671
ELECTRICAL SOLUTIONS A. System Overview Copper Compression Parallel Splice How to Use This Guide B1. Cable Ties Example: (3) #14 AWG wires (2) #12 AWG wires 1 In Table 1 find #14 AWG wire size and # of wires on vertical axis. 2 Find #12 AWG wire size and # of wires on horizontal axis. 3 Find the intersection of 1 and 2 to identify the correct color coded splice, which corresponds to the part number in Table 2. blue = PSCBLU-L 4 See tool chart on page D3.
PAGE 672
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Flex Conductor, One-Hole, Standard Barrel with Window Lug For Use with Flexible, Extra-Flexible, and Code Stranded Copper Conductors Type LCAX B2. Cable Accessories B3.
PAGE 673
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, One-Hole, Standard Barrel with Window Lug (continued) B1. Cable Ties Part Number LCAX1/0-14-X Flex Conductor Size Code Class Diesel Conductor G, H, I, K, M Locomotive Size LCAX1/0-56-X LCAX1/0-38-X 1/0 AWG 1/0 AWG 1/0 AWG LCAX1/0-12-X Stud Hole Size (In.) 1/4 Figure Dimensions (In.) W B T L 0.85 0.72 0.13 1.82 Panduit Color Code Pink Panduit Die Index No.‡ P42 Burndy Die Index No.‡ 12 T&B Die Index No.‡ 42 5/16 0.85 0.72 0.13 1.
PAGE 674
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Flex Conductor, One-Hole, Standard Barrel with Window Lug, 45° Angle For Use with Flexible, Extra-Flexible, and Code Stranded Copper Conductors Type LCAX-H B2. Cable Accessories B3.
PAGE 675
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, One-Hole, Standard Barrel with Window Lug, 45° Angle (continued) B1. Cable Ties Part Number LCAX2/0-10H-X Figure Dimensions Flex Conductor Size (In.) Code Stud Class Diesel Conductor Hole Size W B T L G, H, I, K, M Locomotive Size (In.) #10 0.96 0.83 0.13 1.56 Panduit Color Code Black Panduit Die Index No.‡ P45 Burndy Die Index No.‡ 13 T&B Die Index No.‡ 45 Wire Strip Std. Length Pkg. (In.) Qty. 7/8 10 LCAX2/0-14H-X 1/4 0.96 0.83 0.13 1.
PAGE 676
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Flex Conductor, One-Hole, Standard Barrel with Window Lug, 90° Angle For Use with Flexible, Extra-Flexible, and Code Stranded Copper Conductors Type LCAX-F B2. Cable Accessories B3.
PAGE 677
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, One-Hole, Standard Barrel with Window Lug, 90° Angle (continued) B1. Cable Ties Part Number LCAX2/0-10F-X Figure Dimensions Flex Conductor Size (In.) Code Class Diesel Conductor Stud Hole B T L G, H, I, K, M Locomotive Size (In.) W Size #10 0.96 0.83 0.13 1.42 Panduit Color Code Black Panduit Die Index No.‡ P45 Burndy Die Index No.‡ 13 T&B Die Index No.‡ 45 Wire Std. Strip Length Pkg. Qty. (In.) 7/8 10 LCAX2/0-14F-X 1/4 0.96 0.83 0.13 1.
PAGE 678
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 679
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, One-Hole, Standard Barrel with Window, Flared NEBS Lug For Use with Flexible and Extra-Flexible Copper Conductors B1.
PAGE 680
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, One-Hole, Standard Barrel with Window, Flared NEBS Lug (continued) B1. Cable Ties B2. Cable Accessories Part Number LCAF2/0-14-X Flex Conductor Size Diesel Class K and M Locomotive LCAF2/0-56-X C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors L 2.49 Std. Pkg. Qty. 10 1.35 0.13 2.49 Orange P50 1 7/16 10 1.35 0.13 2.55 Orange P50 1 7/16 10 LCAF2/0-12-X 1/2 0.96 1.35 0.13 2.
PAGE 681
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, One-Hole, Standard Barrel with Window, Flared NEBS Lug, 45° Angle B1. Cable Ties For Use with Flexible and Extra-Flexible Copper Conductors Type LCAF-H • Tin-plated to inhibit corrosion • UL Listed and CSA Certified to 35 KV** and temperature rated to 90°C when crimped with Panduit crimping tools and dies • Tested by Telcordia – meets NEBS Level 3 • American Bureau of Shipping approved W B2. Cable Accessories B3. Stainless Steel Ties C1.
PAGE 682
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, One-Hole, Standard Barrel with Window, Flared NEBS Lug, 45° Angle (continued) B1. Cable Ties B2. Cable Accessories Part Number LCAF3/0-14H-X Flex Conductor Size Diesel Class K and M Locomotive LCAF3/0-56H-X C3. Abrasion Protection C4. Cable Management D1. Terminals T 0.14 L 2.11 Wire Strip Length (In.) 1 7/16 Std. Pkg. Qty. 10 1.06 1.35 0.14 2.13 Purple P54 1 7/16 10 1.35 0.14 2.
PAGE 683
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, One-Hole, Standard Barrel with Window, Flared NEBS Lug, 90° Angle B1.
PAGE 684
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, One-Hole, Standard Barrel with Window, Flared NEBS Lug, 90° Angle (continued) B1. Cable Ties Figure Dimensions (In.) Flex Conductor Size B2. Cable Accessories Part Number LCAF2/0-14F-X Class K and M Diesel Locomotive 2/0 AWG 2/0 AWG LCAF2/0-56F-X C4. Cable Management D1. Terminals D2. Power Connectors 1.35 0.13 1.71 Orange P50 1 7/16 10 1.35 0.13 1.77 Orange P50 1 7/16 10 LCAF2/0-12F-X 1/2 0.96 1.35 0.13 2.
PAGE 685
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, One-Hole, Long Barrel with Window Lug For Use with Flexible, Extra-Flexible, and Code Stranded Copper Conductors B1.
PAGE 686
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 687
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, One-Hole, Long Barrel with Window Lug, 90° Angle For Use with Flexible, Extra-Flexible, and Code Stranded Copper Conductors B1.
PAGE 688
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 689
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, Two-Hole, Standard Barrel with Window Lug (continued) Part Number LCDX1/0-14A-X .75 .85 .72 .13 2.57 Pink P42 12 42 3/4 10 .85 .72 .13 2.57 Pink P42 12 42 3/4 10 5/16 1.00 .85 .72 .13 2.82 Pink P42 12 42 3/4 10 LCDX1/0-38D-X 3/8 1.00 .85 .72 .13 2.89 Pink P42 12 42 3/4 10 LCDX1/0-12D-X 1/2 1.00 .85 .72 .13 3.14 Pink P42 12 42 3/4 10 LCDX1/0-12-X 1/2 1.75 .85 .72 .13 4.
PAGE 690
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 691
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, Two-Hole, Standard Barrel with Window Lug, 45° Angle (continued) B1. Cable Ties Figure Dimensions Stud Stud Flex Conductor Size (In.) Code Panduit Hole Hole Class Diesel Conductor Size Spacing Color Part Number W B T L G, H, I, K, M Locomotive Size Code (In.) (In.) LCDX1/0-14AH-X 1/4 .63 .85 .72 .13 2.21 Pink Panduit Burndy T&B Wire Std. Die Die Die Strip Index Index Index Length Pkg. Qty. No.‡ No.‡ No.‡ (In.
PAGE 692
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 693
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, Two-Hole, Standard Barrel with Window Lug, 90° Angle (continued) B1. Cable Ties Figure Dimensions Stud Stud Flex Conductor Size (In.) Code Hole Hole Class Diesel Conductor Size Spacing Part Number W B T L G, H, I, K, M Locomotive Size (In.) (In.) LCDX1/0-14AF-X 1/4 .63 .85 .72 .13 2.22 Panduit Color Code Pink Panduit Die Index No.‡ P42 Burndy Die Index No.‡ 12 T&B Die Index No.‡ 42 Wire Strip Std. Length Pkg. Qty. (In.
PAGE 694
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 695
ELECTRICAL SOLUTIONS Flex Conductor, Two-Hole, Standard Barrel with Window, Narrow Tongue Lug, 45° For Use with Flexible Copper Conductors A. System Overview B1.
PAGE 696
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 697
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, Two-Hole, Long Barrel with Window Lug (continued) Part Number LCCX2-14A-E* Stud Flex Conductor Size Code Hole Class Diesel Conductor Size G, H, I, K, M Locomotive Size (In.) 1/4 LCCX2-14B-E* Stud Hole Spacing (In.) 0.63 B1. Cable Ties Figure Dimensions (In.) Panduit Color W B T L Code 0.70 1.36 0.11 2.89 Brown Panduit Burndy T&B Wire Die Die Die Strip Std. Index Index Index Length Pkg. Qty. No.‡ No.‡ No.‡ (In.) P33 10 33 1 7/16 20 1/4 0.
PAGE 698
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 699
ELECTRICAL SOLUTIONS Flex Conductor, Two-Hole, Long Barrel with Window Lug, 45° Angle (continued) Figure Dimensions (In.) Stud Hole Size (In.) Stud Hole Spacing (In.) 1/4 0.63 0.85 1.50 0.13 2.76 Pink P42 12 42 1 9/16 10 1/4 0.75 0.85 1.50 0.13 2.88 Pink P42 12 42 1 9/16 10 3/8 1.00 0.85 1.50 0.13 3.20 Pink P42 12 42 1 9/16 10 LCCX1/0-12H-X 1/2 1.75 0.85 1.50 0.13 4.36 Pink P42 12 42 1 9/16 10 LCCX2/0-14AH-X 1/4 0.63 0.96 1.50 0.13 2.
PAGE 700
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 701
ELECTRICAL SOLUTIONS Flex Conductor, Two-Hole, Long Barrel with Window Lug, 90° Angle (continued) Part Number LCCX2/0-14AF-X Flex Conductor Size Code Class G, Diesel Conductor H, I, K, M Locomotive Size LCCX2/0-14BF-X Stud Hole Size (In.) 1/4 Figure Dimensions Stud (In.) Hole Spacing W B T L (In.) 0.63 0.96 1.50 0.13 2.29 Burndy T&B Wire Panduit Panduit Die Die Strip Std. Color Die Index Index Index Length Pkg. Code No.‡ Qty. No. No. (In.) Black P45 13 45 1 9/16 10 1/4 0.75 0.96 1.50 0.13 2.
PAGE 702
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 703
ELECTRICAL SOLUTIONS A. System Overview Flex Conductor, Two-Hole, Long Barrel, Flared NEBS Lug (continued) Part Number LCCF1/0-14A-X Flex Conductor Size Class Diesel K and M Locomotive LCCF1/0-14B-X Stud Hole Size (In.) 1/4 Stud Hole Spacing (In.) .63 Figure Dimensions (In.) W .85 B 1.50 T .13 L 3.38 B1. Cable Ties Panduit Color Code Black Panduit Die Index No.‡ P45 Wire Strip Length (In.) 1 9/16 Std. Pkg. Qty. 10 1/4 .75 .85 1.50 .13 3.51 Black P45 1 9/16 10 5/16 .88 .85 1.50 .
PAGE 704
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 705
ELECTRICAL SOLUTIONS Flex Conductor, Two-Hole, Long Barrel, Flared NEBS Lug, 45° Angle (continued) Part Number LCCF4/0-14BH-X Flex Conductor Size Class Diesel K and M Locomotive LCCF4/0-38DH-X LCCF4/0-38H-X 4/0 AWG 4/0 AWG ◆ LCCF4/0-12H-X LCCF250-14BH-X LCCF250-38DH-X LCCF250-12EH-X 250 kcmil 262.6 kcmil ◆ LCCF250-12H-X LCCF300-14BH-6 LCCF300-38DH-6 Figure Dimensions (In.) Stud Hole Size (In.) 1/4 Stud Hole Spacing (In.) .75 W 1.17 B 1.61 T .14 3/8 1.00 1.17 1.61 3/8 1.75 1.17 1.
PAGE 706
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 707
ELECTRICAL SOLUTIONS Flex Conductor, Two-Hole, Long Barrel, Flared NEBS Lug, 90° Angle (continued) Part Number LCCF4/0-14BF-X Flex Conductor Size Class Diesel K and M Locomotive LCCF4/0-38DF-X LCCF4/0-38F-X 4/0 AWG 4/0 AWG ◆ LCCF4/0-12F-X LCCF250-14BF-X LCCF250-38DF-X LCCF250-12EF-X 250 kcmil 262.6 kcmil ◆ LCCF250-12F-X LCCF300-14BF-6 LCCF300-38DF-6 300 kcmil 313.1 kcmil ◆ LCCF300-12F-6 LCCF350-14BF-6 LCCF350-38DF-6 LCCF350-12EF-6 350 kcmil 373.
PAGE 708
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 709
ELECTRICAL SOLUTIONS A. System Overview Code/Flex Conductor, with Window, In-Line Reducing Splice Kit Type RSCK • Includes all components in one package for making a complete electrical connection: Panduit copper compression RSC in-line reducing splice (see pages D2.105 – D2.
PAGE 710
ELECTRICAL SOLUTIONS A. System Overview Code/Flex Conductor, with Window, In-Line Reducing Splice Kit (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Std. Pkg. Qty. 1 Part Number RSCK4/0-1/0-1 Part Description Kit contains: 1 pc. RSC4/0-1/0-X copper compression in-line reducing splice. 1 pc. HSTTPN100-775-Q crystal clear PVC heat shrink 1" dia. x 7.750" long. 1 pc. HSTTPN75-775-Q crystal clear PVC heat shrink 3/4" dia. x 7.750" long. RSCK4/0-2/0-1 Kit contains: 1 pc.
PAGE 711
ELECTRICAL SOLUTIONS A. System Overview Code/Flex Conductor, with Window, In-Line Reducing Splice For Use with Stranded Copper Code and Class I Flex Conductors B1.
PAGE 712
ELECTRICAL SOLUTIONS A. System Overview Code/Flex Conductor, with Window, In-Line Reducing Splice (continued) B1. Cable Ties B2. Cable Accessories Part Number RSC750-4/0-6 RSC750-X4/0-6 B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection RSC750-X350-6 RSC750-500-6 RSC750-X500-6 RSC750-750-6 RSCX750-4/0-3 RSCX750-750-3 Figure Dimensions (In.) Reduces From Copper Conductor Size 750 kcmil B 2.06 Reduces To 4/0 AWG 1.50 Reduces From 750 kcmil 2.
PAGE 713
ELECTRICAL SOLUTIONS A. System Overview Part Number System for Metric Lugs B1. Cable Ties B2. Cable Accessories LCMA 150 – 10 150 = 150mm2 – B3. Stainless Steel Ties X 10 = 10mm 1=1 5=5 X = 10 L = 50 C = 100 C1. Wiring Duct Part Number System for Pan-Lug ™ Compression Metric Lugs LCMA 150 Type Conductor Size 10 — X — Stud Hole Size 5 = 6 = 8 = 10 = 12 = 14 = 16 = 20 = 00 = C2. Surface Raceway Standard Package Size C3.
PAGE 714
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index D2.
PAGE 715
ELECTRICAL SOLUTIONS A. System Overview Metric Conductor, Two-Hole, Standard Barrel with Window Lug B1.
PAGE 716
ELECTRICAL SOLUTIONS A. System Overview Metric Conductor, Two-Hole, Standard Barrel with Window Lug (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3.
PAGE 717
ELECTRICAL SOLUTIONS A. System Overview Metric Conductor, Standard Barrel, Butt Splice B1. Cable Ties For Use with Class 2 Stranded Copper Conductors Type SCMS • Tin-plated to inhibit corrosion • UL Listed, UL Recognized, and CSA Certified to 35 KV** and temperature rated to 90°C when crimped with Panduit tools and dies • Product information marked on connector for selection and installation • Internally beveled wire entry for fast and easy installation B2. Cable Accessories B3.
PAGE 718
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Code Conductor, One-Hole, Aluminum Lug For Use with Stranded Aluminum or Copper Code Conductors Type LAA • Manufactured from high conductivity thick wall wrought aluminum • Factory pre-filled with joint compound and sealed with easy pull-out end plug to inhibit corrosion • Color-coded end plug and Panduit and specified competitor die index numbers marked on barrel for proper crimp die selection B3.
PAGE 719
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Two-Hole, Aluminum Lug For Use with Stranded Aluminum or Copper Code Conductors B1.
PAGE 720
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Belleville Compression Washers Type CW • Conical spring washer for use when assembling aluminum connectors to copper and/or steel pads, compensates for differing rates of thermal expansion to keep hardware assembly from loosening B3. Stainless Steel Ties C2. Surface Raceway C3. Abrasion Protection C4. Cable Management Figure Dimensions (In.) Stud Hole Size (In.) 1/4 D .68 H .09 T .05 Std. Pkg. Qty. 50 CW-56-L 5/16 .
PAGE 721
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Aluminum Splice For Use with Stranded Aluminum-to-Aluminum or Copper-to-Copper Conductors B1.
PAGE 722
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 723
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Aluminum, Bi-Metallic Pin Connector Provides Copper Pigtail for Connecting Aluminum Conductors to a Copper or Aluminum/Copper Rated Mechanical Lug B1.
PAGE 724
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Joint Compounds For Use with Aluminum Connectors Type CMP • Oxide inhibitor for compression conductor connections lowers electrical resistance of compression joint while sealing out air and moisture to prevent the formation of surface oxides • Wide operating temperature range; can be used in a wide range of electrical and environmental conditions • Packaged in convenient dispenser bottles B3. Stainless Steel Ties C1.
PAGE 725
ELECTRICAL SOLUTIONS A. System Overview PAN-LUG ™ MECHANICAL CONNECTORS Panduit offers a broad variety of mechanical lugs, splices, and split bolt connectors suitable for a wide range of electrical terminations using code conductor. Designed to be reusable and installed without special tooling, Pan-Lug ™ Mechanical Connectors provide quality performance, ease of installation, and lowest installed cost. B1. Cable Ties B2. Cable Accessories B3.
PAGE 726
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1.
PAGE 727
ELECTRICAL SOLUTIONS Selection Guide – Pan-Lug™ Mechanical Connectors, Cast Copper 1. Select Connector Type and Stud Hole Size Desired ‡ Mechanical Connector Type Copper Code Conductor Size Stud #8 #6 #4 #2 #1 1/0 2/0 3/0 4/0 250 300 350 500 600 750 800 1000 Hole #14 #12 #10 Size AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil Panduit Part Number (In.) HL1-25-X ■ * One-Hole, Straight Tongue HL D2.
PAGE 728
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Pan-Lug ™ Mechanical Connectors, Stamped and Formed 1. Select Connector Type and Stud Hole Size Desired B1. Cable Ties Mechanical Current Connector Rating Type AMPS B2. Cable Accessories 25 1/8 50 3/16 One-Hole, Offset Tongue CB C1. Wiring Duct 90 225 5/16 1/2 50 3/16 125 225 300 D1. Terminals D2.140 D2.136 One-Hole, Straight “Fixed” Tongue CX 35 3/16 One-Hole, Straight Tongue CS D3.
PAGE 729
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Pan-Lug ™ Mechanical Connectors, Aluminum 1. Select Connector Type and Stud Hole Size Desired 2. Determine Conductor Size and then Select Panduit Part Number B1. Cable Ties Aluminum/Copper Code Conductor Size Mechanical Connector Type Stud Hole Size (In.) D2.
PAGE 730
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Selection Guide – Pan-Lug ™ Mechanical Connectors, Split Bolts and Multi-Taps 1. Select Split Bolt Style Desired Copper Split Bolt Connectors – SBC For Use with Copper Code Conductors C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4.
PAGE 731
ELECTRICAL SOLUTIONS A. System Overview Split Bolt, Copper For Use with Copper Code Conductors B1.
PAGE 732
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Split Bolt, Copper, Tin-Plated For Specified Combinations of Copper and Aluminum Code Conductors Type SBCT • Made from high strength copper alloy to provide premium electrical and mechanical performance • Tin-plated to inhibit corrosion and oxidation • Offered with dual rating for use with aluminum or copper conductors • Wide wire range-taking capability minimizes inventory requirements B3.
PAGE 733
ELECTRICAL SOLUTIONS A. System Overview Split Bolt, Aluminum For Use with Copper and Aluminum Code Conductors B1.
PAGE 734
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 735
ELECTRICAL SOLUTIONS A. System Overview One-Hole, Straight Tongue, Tin-Plated, Barrel Post Lug For Use with Copper Code Conductors B1.
PAGE 736
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 737
ELECTRICAL SOLUTIONS A. System Overview One-Hole, Straight Tongue, 90° Lug For Use with Copper Code Conductors B1.
PAGE 738
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 739
ELECTRICAL SOLUTIONS A. System Overview Two-Hole, Straight Tongue Lug with NEMA Hole Sizes and Spacing For Use with Copper Code Conductors B1.
PAGE 740
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 741
ELECTRICAL SOLUTIONS A. System Overview Two-Set Screw Splice For Use with Copper Code Conductors B1.
PAGE 742
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 743
ELECTRICAL SOLUTIONS A. System Overview One-Hole, Straight Floating Tongue Lug For Use with Stranded Copper Code Conductors B1.
PAGE 744
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 745
ELECTRICAL SOLUTIONS A. System Overview One-Hole, Offset Floating Tongue Lug For Use with Stranded Copper Code Conductors B1.
PAGE 746
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 747
ELECTRICAL SOLUTIONS A. System Overview One-Hole, Single Barrel Lug For Use with Stranded Aluminum or Copper Code Conductors B1.
PAGE 748
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 749
ELECTRICAL SOLUTIONS A. System Overview One-Hole, Vertical Two-Barrel Lug For Use with Stranded Aluminum or Copper Code Conductors B1.
PAGE 750
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 751
ELECTRICAL SOLUTIONS A. System Overview Four-Hole, Three-Barrel Lug For Use with Stranded Aluminum or Copper Code Conductors B1.
PAGE 752
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 753
ELECTRICAL SOLUTIONS A. System Overview Transformer Lug Kit For Use with Stranded Aluminum or Copper Code Conductors B1.
PAGE 754
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 755
ELECTRICAL SOLUTIONS A. System Overview Multi-Tap Connector with Clear Insulation, Single-Sided For Use with Aluminum or Copper Code Conductors B1.
PAGE 756
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 757
ELECTRICAL SOLUTIONS A. System Overview Multi-Tap Connector with Clear Insulation, Double-Sided (continued) Figure Dimensions (In.) No. of Ports 2 L 2.17 W 3.00 H 2.50 S 1.00 Hex Key Size (In.) 3/8 Std. Pkg. Qty. 4 PCSB350-3-4 3 3.17 3.00 2.50 1.00 3/8 4 PCSB350-4-3 4 4.17 3.00 2.50 1.00 3/8 3 PCSB350-5-3 5 5.17 3.00 2.50 1.00 3/8 3 6 6.17 3.00 2.50 1.00 3/8 2 8 8.17 3.00 2.50 1.00 3/8 2 PCSB350-10-2Y 10 10.17 3.00 2.50 1.00 5/16 2 PCSB350-12-1Y 12 12.
PAGE 758
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 759
ELECTRICAL SOLUTIONS A. System Overview Multi-Tap Connector with Clear Insulation, Single-Sided, with Mounting Holes For Use with Aluminum or Copper Code Conductors B1.
PAGE 760
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3.
PAGE 761
ELECTRICAL SOLUTIONS A. System Overview Belleville Compression Washers Type CW • Conical spring washer for use when assembling aluminum connectors to copper and/or steel pads, compensates for differing rates of thermal expansion to keep hardware assembly from loosening B1. Cable Ties • For assembly information, see page D2.158 • Made from hardened steel to provide high strength • Cadmium-plated to inhibit corrosion Figure Dimensions (In.) Stud Hole Size (In.) 1/4 D 0.68 H 0.09 T 0.05 Std. Pkg. Qty.
PAGE 762
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Guidelines for Installing Aluminum Mechanical Connectors 1. Select the correct connector for your application. • • B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway 2. Remove the insulation from insulated cable. • • • C3. Abrasion Protection C4. Cable Management D1. Terminals • D2. Power Connectors E1. Labeling Systems • • E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index D2.
PAGE 763
ELECTRICAL SOLUTIONS A. System Overview Panduit Power Connector Approvals B1. Cable Ties Logo (Symbol) Agency Spec/Approval Applicable Products Underwriters Laboratories, Inc. UL 486A-486B Wire Connectors and Soldering Lugs for use in US and Canada As shown on product pages. Underwriters Laboratories, Inc. UL 486A-486B Wire Connectors and Soldering Lugs for use in US As shown on product pages. Underwriters Laboratories, Inc.
PAGE 764
ELECTRICAL SOLUTIONS A. System Overview Recommended Termination Hardware B1. Cable Ties Hex nut B2. Cable Accessories Split lock washer or belleville (conical) washer recommended for aluminum lugs Flashwasher B3. Stainless Steel Ties Copper or aluminum compression or mechanical lug C1. Wiring Duct Threaded stud C2. Surface Raceway Busbar or mounting pad C3. Abrasion Protection Use of CMP-100 joint compound between aluminum lug and copper or aluminum busbar or mounting pad is recommended C4.
PAGE 765
ELECTRICAL SOLUTIONS A. System Overview Conductor Sizes Copper Concentric Stranded Conductor Sizes B1. Cable Ties Flexible Copper Conductor Sizes Conductor Size AWG or kcmil Number of Strands Nominal Diameter (In.) Class Conductor Size AWG or kcmil Number of Strands Nominal Diameter (In.
PAGE 766
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index D2.
PAGE 767
ELECTRICAL SOLUTIONS A. System Overview Conductor Sizes (continued) Copper Solid Conductor Sizes Aluminum Compact Stranded Conductor Sizes Solid Copper Conductor Size AWG or kcmil Conductor Diameter (In.) #18 #17 #16 #15 #14 #13 #12 #11 #10 #9 #8 #7 #6 #5 #4 #3 #2 #1 1/0 2/0 3/0 4/0 .040 .045 .050 .057 .064 .071 .080 .090 .101 .114 .128 .128 .162 .181 .204 .229 .257 .289 .324 .364 .409 .
PAGE 768
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Common Conductor Sizes and Strandings Reference Chart Conductor AWG Metric mm2 No. .05 25 .06 B3. Stainless Steel Ties C1. Wiring Duct 26 24 C2. Surface Raceway 0.25 C3. Abrasion Protection C4. Cable Management 22 D1. Terminals 0.38 D2. Power Connectors .5 D3. Grounding Connectors 20 E1. Labeling Systems .75 E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5.
PAGE 769
ELECTRICAL SOLUTIONS A. System Overview Common Conductor Sizes and Strandings Reference Chart (continued) Conductor AWG Individual Strands Diameter Metric mm2 No. mm In. Overall Conductor Size Diameter Area mm In. Circ. MILS Conductor AWG Individual Strands Diameter Metric mm2 No. Overall Conductor Size Diameter Area mm In. mm In. Circ. MILS 19 2.57 0.101 12.8 0.505 187500 37 1.83 0.072 12.5 0.504 187500 19 2.89 0.1055 13.4 0.528 211600 37 2.06 0.081 14.4 0.
PAGE 770
ELECTRICAL SOLUTIONS A. System Overview Stud Size Chart (Inches/Millimeters) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Standard Stud Size #2 #4 #5 #6 #8 #10 1/4" 5/16" 3/8" 7/16" Stud Size Decimal Equivalent .086" .112" .127" .138" .164" .190" .250" .312" .375" .438" Terminal Hole Diameter .090" .118" .130" .147" .173" .204" .270" .343" .392"* .406"** .
PAGE 771
ELECTRICAL SOLUTIONS A. System Overview STRUCTUREDGROUND™ GROUNDING CONNECTORS Panduit StructuredGround Grounding Connectors provide innovative solutions for joining ground conductors to water pipe, ground rods, rebar, conduit, iron pipe and structural steel. Designed with the needs of the end user in mind, StructuredGround ™ Grounding Connectors feature easy installation, lowest installed cost, and long-term reliability. ® ™ B1. Cable Ties B2. Cable Accessories B3.
PAGE 772
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – StructuredGround ™ Compression Connectors B1. Cable Ties Bolded features are unique to Panduit. Copper HTAPs Clear Covers for Copper HTAPs B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 773
ELECTRICAL SOLUTIONS A. System Overview StructuredGround Direct Burial Compression Grounding System Roadmap ™ B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Service Entrance C1. Wiring Duct Transformer 4 6 C2. Surface Raceway C3. Abrasion Protection Service Panel C4. Cable Management 3 5 D1. Terminals 1 2 D2. Power Connectors D3. Grounding Connectors 1 Conductor to Conductor E Style Grounding Connectors: Create bonds between parallel grounding conductors. (see page D3.
PAGE 774
ELECTRICAL SOLUTIONS A. System Overview Service Entrance Grounding Roadmap B1. Cable Ties • Complies with J-STD-607-A and IEEE Std 1100 (IEEE Emerald Book) • Grounding Equalizer (GE) is required when two or more Telecommunications Bonding Backbones (TBB) are used within a multi-story building; bond TBBs together with a GE at the top floor and at a minimum of every third floor in between B2. Cable Accessories Telecommunications Bonding Backbone (TBB)** 2 B3.
PAGE 775
ELECTRICAL SOLUTIONS A. System Overview Access Floor Grounding Clamp B1. Cable Ties Type GPQC • Bond mesh common bonding network (MCBN) conductors to each other and bond the access floor pedestals to the conductors • Specifically designed to bond perpendicular MCBN conductors per TIA-942 • Bond to the pedestal with a single bolt to simplify installation • Accommodate conductors from #6 – 1/0 AWG, minimizes inventory requirements • Bond round and square access floor pedestals for greater flexibility B2.
PAGE 776
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories BICSI/J-STD-607-A Telecommunications Grounding Busbars Type GB • Meets BICSI and J-STD-607-A requirements for network systems grounding applications • Made of high conductivity copper and tin-plated to inhibit corrosion • Comes pre-assembled with brackets and insulators attached for quick installation B3.
PAGE 777
ELECTRICAL SOLUTIONS A. System Overview NEMA Hole Pattern Grounding Busbars Type GBN • Provided with standard NEMA hole pattern spacing • Made of high conductivity copper and tin-plated to inhibit corrosion B1. Cable Ties • Come pre-assembled with brackets and insulators attached for quick installation • Insulators provide 600 V of insulation B2. Cable Accessories No. of Mounting Positions Std. Pkg. Qty.
PAGE 778
ELECTRICAL SOLUTIONS A. System Overview E Style Grounding Connectors B1. Cable Ties Type GCE B2. Cable Accessories B3.
PAGE 779
ELECTRICAL SOLUTIONS A. System Overview Grounding Cross Connectors B1.
PAGE 780
ELECTRICAL SOLUTIONS A. System Overview Universal Beam Grounding Clamp B1. Cable Ties Type GUBC B2. Cable Accessories • Universal, fits on a wide range of standard (angled) and wide flange (parallel) structural steel beams • Provide a mounting pad suitable for a two-hole compression lug • Install quickly and easily with standard 1/4" key hex wrench tooling • UL 467 Listed and CSA 22.
PAGE 781
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Thin Wall, CTAP B1.
PAGE 782
ELECTRICAL SOLUTIONS A. System Overview Code Conductor, Heavy Duty, CTAP B1. Cable Ties For Use with Solid and Stranded Copper Code Conductors Type CTAP B2. Cable Accessories B3.
PAGE 783
ELECTRICAL SOLUTIONS A. System Overview Clear Covers for HTCT HTAPs B1.
PAGE 784
ELECTRICAL SOLUTIONS A. System Overview Code/Flex Conductor HTAP B1. Cable Ties For Making Parallel and Multiple Tap Connections on Code and Flex Conductors Type HTCT B2. Cable Accessories B3. Stainless Steel Ties C1.
PAGE 785
ELECTRICAL SOLUTIONS A. System Overview Code/Flex Conductor HTAP Kit B1.
PAGE 786
ELECTRICAL SOLUTIONS A. System Overview Features and Benefits – StructuredGround™ Mechanical Connectors B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2.
PAGE 787
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – StructuredGround ™ Mechanical Connectors Copper Code Conductor Size UL Listed Direct Burial Service Post Type Stud Size (In.) 1/4-20 5/16-18 Bronze Service Post One Conductor SP1 3/8-16 1/2-13 5/8-11 3/4-10 D3.20 1/4-20 5/16-18 Bronze Service Post Two Conductors SP2 3/8-16 1/2-13 5/8-11 3/4-10 D3.21 1/4-20 Bronze Service Post One Conductor SPF1 5/16-18 3/8-16 1/2-13 5/8-11 D3.
PAGE 788
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – StructuredGround ™ Mechanical Connectors (continued) Copper Code Conductor Size UL Listed Direct Burial B1. Cable Ties D3.24 Ground Clamp Type One Barrel, One-Hole LI B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway Bronze Ground Clamp One Conductor GPL Ground Rod Size (In.) Pipe Size (In.) — — 5/8 or 3/4 3/8 7/8 or 1 1/2 or 3/4 — 1 — 1 1/4 — 1 1/2 — 2 — 2 1/2 — 3 — 3 1/2 D3.25 C3.
PAGE 789
ELECTRICAL SOLUTIONS A. System Overview Panduit Grounding Connector Approvals B1. Cable Ties Logo (Symbol) Agency Spec/Approval Applicable Products Underwriters Laboratories, Inc. UL 486A Wire Connectors and Soldering Lugs for use in US and Canada As shown on product pages. Underwriters Laboratories, Inc. UL 486A – 486B Wire Connectors and Soldering Lugs for use in US As shown on product pages. UL 467 Grounding and Bonding Equipment for use in US and Canada As shown on product pages.
PAGE 790
ELECTRICAL SOLUTIONS A. System Overview Service Post Connector, Male Stud, Single Conductor, Bronze B1. Cable Ties Type SP1 B2. Cable Accessories B3.
PAGE 791
ELECTRICAL SOLUTIONS A. System Overview Service Post Connector, Male Stud, Two Conductor, Bronze B1.
PAGE 792
ELECTRICAL SOLUTIONS A. System Overview Service Post Connector, Female Thread, Single Conductor, Bronze B1. Cable Ties B2. Cable Accessories Type SPF1 • For grounding one copper code conductor to steel structures, busbars, or transformers or for tapping from busbar using external studs, screws, or bolts • Made from high copper content, hard drawn copper rod provides high strength • Wide wire range-taking capability minimizes inventory requirements B3.
PAGE 793
ELECTRICAL SOLUTIONS A. System Overview Service Post Connector, Female Thread, Two Conductor, Bronze B1.
PAGE 794
ELECTRICAL SOLUTIONS A. System Overview One-Hole Aluminum Lay-In Lug B1. Cable Ties B2. Cable Accessories Type LI • Used for quick installation of a continuous grounding conductor • Made from high strength, extruded aluminum alloy to provide premium electrical and mechanical performance • Tin-plated to inhibit corrosion • Wide wire range-taking capability minimizes inventory requirements • UL Listed and CSA Certified for use up to 600 V and UL temperature rated 90°C B3. Stainless Steel Ties W C1.
PAGE 795
ELECTRICAL SOLUTIONS A. System Overview Grounding Clamp, U-Bolt, Bronze B1. Cable Ties Type GPL • Used to ground copper conductor parallel or at a right angle to a rod, tube, or pipe • Made from high strength, electrolytic cast bronze • High strength silicon bronze hardware provides long term reliable assembly • Accommodates a wide range of pipe, tube, rod and conductor sizes – minimizes inventory requirements • UL Listed for grounding and bonding and suitable for direct burial in earth or concrete B3.
PAGE 796
ELECTRICAL SOLUTIONS A. System Overview Grounding Clamp, U-Bolt, for Two Cables, Bronze B1. Cable Ties B2.
PAGE 797
ELECTRICAL SOLUTIONS A. System Overview Grounding Clamp for Water Pipe with Copper Strap, Bronze B1.
PAGE 798
ELECTRICAL SOLUTIONS A. System Overview Grounding Clamp for Water Pipes, Aluminum B1. Cable Ties Type GC B2. Cable Accessories • Dual-rated for grounding aluminum or copper code conductors to copper water pipe, galvanized pipe, or steel conduit • Made from high strength, extruded aluminum alloy to provide long term durability • Tin-plated to inhibit corrosion and oxidation and for low contact resistance B3.
PAGE 799
ELECTRICAL SOLUTIONS A. System Overview Grounding Clamp with Spacer for Flat Surfaces, Bronze B1.
PAGE 800
ELECTRICAL SOLUTIONS A. System Overview Flat Braided Bonding Straps B1. Cable Ties Type BS B2. Cable Accessories B3.
PAGE 801
ELECTRICAL SOLUTIONS A. System Overview COMPRESSION CONNECTOR CRIMPING TOOLS Panduit offers a wide range of tools to provide solutions for installing compression lugs and splices. Panduit installation tools provide quality performance, ease of installation, and lowest installed cost. The long-term reliability of Panduit installation tools provides the highest level of service to meet and surpass customer requirements. B1. Cable Ties B2. Cable Accessories B3.
PAGE 802
ELECTRICAL SOLUTIONS A. System Overview Crimping Guidelines for Panduit ® Pan-Lug ™ Compression Lugs and Splices B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection 1. Select the proper Panduit compression connector for the conductor type and size being used.
PAGE 803
ELECTRICAL SOLUTIONS A. System Overview Crimping Guidelines for Panduit ® StructuredGround ™ Compression Connectors B1. Cable Ties TAP Installation B2. Cable Accessories Figure A 1. Locate desired position of TAP along main wire run. Allow clearance for tap wires (and cover installation if applicable). See clear cover table on page D3.13. 2. Strip insulation from wires to the length shown in the TAP table on page D3.14. Use care to avoid damaging the conductors. Crimping Direction 3.
PAGE 804
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Compression Connector Tools B1. Cable Ties Tool Selection Guide for Crimping Panduit Copper Compression Lugs and Splices for use with Copper Code Conductors Copper Conductor Range B2.
PAGE 805
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Compression Connector Tools (continued) Tool Selection Guide for Crimping Panduit Copper Compression Lugs and Splices for use with Copper Flex Conductor B1.
PAGE 806
ELECTRICAL SOLUTIONS A. System Overview Selection Guide – Compression Connector Tools (continued) B1. Cable Ties Tool Selection Guide for Crimping Panduit Aluminum Compression Lugs and Splices for use with Copper or Aluminum Code Conductor Copper or Aluminum Conductor Range B2. Cable Accessories Conductor Type Connector Type Manual Crimping Tools B3. Stainless Steel Ties Manual Hydraulic Crimping Tool C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1.
PAGE 807
ELECTRICAL SOLUTIONS A. System Overview Die Type, Manual, Crimping Tool • High quality, durable tool construction provides long term dependability Part Number CT-720 B1.
PAGE 808
ELECTRICAL SOLUTIONS A. System Overview Die Type, Manual, Crimping Tool and Die Kits B1. Cable Ties • Available with or without controlled cycle feature to meet specific applications B2. Cable Accessories Part Number CT-720-7 B3. Stainless Steel Ties • Kits available with three or full set of seven dies for crimping partial or full range of connector sizes Std. Pkg. Qty. 1 Part Description Basic tool kit with seven dies.
PAGE 809
ELECTRICAL SOLUTIONS A.
PAGE 810
ELECTRICAL SOLUTIONS A. System Overview Die Type, Lithium-Ion Powered Hydraulic, 6 Ton, In-Line Crimping Tool B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 811
ELECTRICAL SOLUTIONS A. System Overview Die Type, Lithium-Ion Powered Hydraulic, 6 Ton, Crimping Tool with Open “C-Head” • Lithium-Ion battery powered, provides fingertip operation and up to 120% more crimps per battery charge than tools powered with NiCd or NiMH batteries • Pistol grip tool design with low profile, open “C-Head” provides easy loading of crimping dies and rotates 180°, for reaching into tight spaces • Lightweight and ergonomically balanced for easy operation without fatigue, weighs 11.
PAGE 812
ELECTRICAL SOLUTIONS A. System Overview CD-2001 Crimping Dies B1. Cable Ties • Color-coded to provide easy matching to color-coding marked on connectors • Embosses die index number on connector barrels to provide post crimp inspection • Part number permanently marked on crimping die for easy identification • Provide circumferential crimp results in terminations with premium electrical and mechanical performance B2. Cable Accessories Used to Install Panduit Compression Lug and Splice Sizes B3.
PAGE 813
ELECTRICAL SOLUTIONS A. System Overview Die Type, Lithium-Ion Powered Hydraulic, 14 Ton, Crimping Tool • Lithium-Ion battery powered, provides fingertip operation and up to 63% more crimps per battery charge than tools powered with NiCd or NiMH batteries • Pistol grip tool design with open “C-Head” provides easy loading of crimping dies and rotates 180°, for reaching into tight spaces • Ergonomically balanced for easy operation without fatigue, weighs 17.9 lbs.
PAGE 814
ELECTRICAL SOLUTIONS A. System Overview Die Type, Lithium-Ion Powered Hydraulic, 15 Ton, Crimping Tool B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 815
ELECTRICAL SOLUTIONS A.
PAGE 816
ELECTRICAL SOLUTIONS A. System Overview Die Type, Remote Hydraulic, 15 Ton, Crimp Head B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3.
PAGE 817
ELECTRICAL SOLUTIONS A.
PAGE 818
ELECTRICAL SOLUTIONS A. System Overview Die Type, Remote Hydraulic, 10.5 Ton, Crimp Head B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals • Low pressure system extends life of crimp head for high volume crimping applications • Develops 10.
PAGE 819
ELECTRICAL SOLUTIONS A.
PAGE 820
ELECTRICAL SOLUTIONS A. System Overview CD-920 Crimping Dies B1. Cable Ties B2.
PAGE 821
ELECTRICAL SOLUTIONS A. System Overview CD-940 Crimping Dies • Color-coded for easy matching to color-coding marked on connectors • Embosses die index number on connector barrels for post crimp inspection B1. Cable Ties • Part number permanently marked on crimping die for easy identification • Provides circumferential crimp results in terminations with premium electrical and mechanical performance B2.
PAGE 822
ELECTRICAL SOLUTIONS A. System Overview Uni-Die ™ Dieless, Manual Hydraulic, 6.2 Ton, Crimping Tool B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals • Dieless crimping tool design eliminates purchase or lost crimping dies, saves cost • Develops 6.
PAGE 823
ELECTRICAL SOLUTIONS A. System Overview Uni-Die ™ Dieless, Lithium-Ion Powered Hydraulic, 6.
PAGE 824
ELECTRICAL SOLUTIONS A. System Overview Uni-Die ™ Dieless, Remote Hydraulic, 6.2 Ton, Crimp Head B1. Cable Ties B2. Cable Accessories • Dieless crimping tool design eliminates purchase or lost crimping dies, saves cost • Develops 6.
PAGE 825
ELECTRICAL SOLUTIONS A.
PAGE 826
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories For use with Copper Conductors How to read this chart For LCA6 lug and CT-2001 crimping tool: Installation Tooling and Die Selections for: Types LCAS and SCSS Die Part Number Color Code CD-2001-6 Blue P24 (1) Die Index Number Number of Crimps B3. Stainless Steel Ties Panduit (See Compression Connector Tools Selection Guide, Pages D3.34 – D3.36) C1. Wiring Duct C2. Surface Raceway Panduit Part Number L=Lug S=Splice Std.
PAGE 827
ELECTRICAL SOLUTIONS For use with Copper Conductors A. System Overview Installation Tooling and Die Selections for: Types LCAS and SCSS (continued) B1. Cable Ties B2.
PAGE 828
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories For use with Copper Conductors Installation Tooling and Die Selections for: Types LCA, LCAN, LCD, LCDN and SCS Die Part Number How to read this chart CD-2001-6 For LCA6 lug Color Die Index Blue P24 and CT-2001 Code Number (1) crimping tool: Number of Crimps B3. Stainless Steel Ties Panduit (See Compression Connector Tools Selection Guide, Pages D3.34 – D3.36) C1. Wiring Duct C2.
PAGE 829
ELECTRICAL SOLUTIONS For use with Copper Conductors A. System Overview Installation Tooling and Die Selections for: Types LCA, LCAN, LCD, LCDN and SCS (continued) B1. Cable Ties B2. Cable Accessories Thomas & Betts PennAnderson Union Greenlee Burndy B3.
PAGE 830
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties For use with Copper Conductors Installation Tooling and Die Selections for: Types LCA, LCAN, LCD, LCDN and SCS (continued) Panduit (See Compression Connector Tools Selection Guide, Pages D3.34 – D3.36) B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3.
PAGE 831
ELECTRICAL SOLUTIONS For use with Copper Conductors A. System Overview Installation Tooling and Die Selections for: Types LCA, LCAN, LCD, LCDN and SCS (continued) Thomas & Betts Burndy TBM8-750M-1, TBM14M, TBM15, TBM8-750, TBM14BSCR, Y2MR, TBM15I, TBM8-750BSCR, BPLT14BSCR, Y1MR, TBM15BSCR TBM750BSCR ➇ 13100A Y1MRTC MY29 BAT35, Y35BH, Y750, Y39BH, Y750BH, Y750-2, Y750HS, Y750BH-2, Y39, PAT750, Y35, BAT750 B1.
PAGE 832
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories For use with Copper Conductors C2. Surface Raceway Number of Crimps Panduit Part Number L = Lug S = Splice LCB10 LCC10 C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index D3.
PAGE 833
ELECTRICAL SOLUTIONS For use with Copper Conductors A. System Overview Installation Tooling and Die Selections for: Types LCB, LCBN, LCC, LCCN and SCL (continued) Thomas & Betts PennAnderson Union Greenlee Burndy Y35, Y35BH, Y39, Y39BH, Y750, Y750-2, TBM8-750M-1, TBM14M, Y750BH, Y750HS, TBM15, TBM8-750, TBM14BSCR, Y2MR, Y750BH-2, TBM15I, TBM750BSCR➇, BPLT14BSCR, Y1MR, PAT750, TBM15BSCR TBM8-750BSCR 13100A Y1MRTC MY29 BAT750, BAT35 B1. Cable Ties B3.
PAGE 834
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties For use with Copper Conductors Installation Tooling and Die Selections for: Types LCB, LCBN, LCC, LCCN and SCL (continued) Panduit (See Compression Connector Tools Selection Guide, Pages D3.34 – D3.36) B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3.
PAGE 835
ELECTRICAL SOLUTIONS For use with Copper Conductors Installation Tooling and Die Selections for: Types LCB, LCBN, LCC, LCCN and SCL (continued) Thomas & Betts TBM15, TBM15I, TBM15BSCR A. System Overview TBM8-750M-1, TBM8-750, TBM750BSCR➇, TBM8-750BSCR Burndy TBM14M, TBM14BSCR, BPLT14BSCR, 13100A Y35, Y35BH, Y39, Y39BH, Y750, Y750-2, Y750BH, Y750HS, Y750BH-2, PAT750, BAT750, BAT35 Y45➆, Y46➆ B1. Cable Ties Anderson Y644M, Y644HS, Y644MBH, PAT644, BAT644 PennUnion Greenlee B2.
PAGE 836
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories For use with Copper Conductors How to read this chart For LCBH6 lug and CT-2001 crimping tool: Installation Tooling and Die Selections for: Types LCBH, LCCH, and SCH Panduit (See Compression Connector Tools Selection Guide, Pages D3.34 – D3.36) Die Part Number Color Code CD-2001-6 Blue P24 (2) Die Index Number Number of Crimps B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4.
PAGE 837
ELECTRICAL SOLUTIONS For use with Copper Conductors Installation Tooling and Die Selections for: Types LCBH, LCCH, and SCH (continued) Thomas & Betts TBM15, TBM15I, TBM15BSCR A. System Overview TBM8-750M-1, TBM8-750, TBM8-750BSCR, TBM750BSCR➇ B1. Cable Ties Burndy TBM14M, TBM14BSCR, BPLT14BSCR, 13100A MY29 Y39, Y35, Y35BH, BAT35, Y750, Y750BH-2, Y750HS, Y750-2, BAT750, PAT750, Y39BH, Y750BH Anderson Y45➆, Y46➆ Y644, Y644HS, PAT644, BAT644, Y644MBH PennUnion Greenlee B2.
PAGE 838
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories For use with Copper Conductors How to read this chart For SCT2-2 splice and CT-2001 crimping tool: Installation Tooling and Die Selections for: Type SCT Die Part Number Color Code CD-2001-2 Brown P33 (2) Die Index Number Panduit (See Compression Connector Tools Selection Guide, Pages D3.34 – D3.36) Number of Crimps B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3.
PAGE 839
ELECTRICAL SOLUTIONS Installation Tooling and Die Selections for: For use with Copper Conductors Type SCT (continued) B1. Cable Ties Thomas & Betts TBM12 13642M A. System Overview TBM15, TBM8-750M-1, TBM15I, TBM8-750, TBM15BSCR TBM8-750BSCR Burndy TBM14M, TBM14BSCR, BPLT14BSCR, 13100A MY29 Y39, Y35, Y35BH, Y750HS, Y750, BAT35, Y45, Y39BH, Y46, Y750-2, BAT750, PAT750, Y750BH-2, Y750BH Anderson PennUnion Greenlee B3. Stainless Steel Ties Y644, Y644HS, PAT644, BAT644, Y644MBH C1.
PAGE 840
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories For use with Copper Conductors How to read this chart For LCAX6 lug and CT-2001 crimping tool: Installation Tooling and Die Selections for: Types LCAX, LCAXN, LCBX, LCDX, LCDXN and LCCX Die Part Number Color Code CD-2001-6 Blue P24 (1) Die Index Number Panduit (See Compression Connector Tools Selection Guide, Pages D3.34 – D3.36) Number of Crimps B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 841
ELECTRICAL SOLUTIONS For use with Copper Conductors A. System Overview Installation Tooling and Die Selections for: Types LCAX, LCAXN, LCBX, LCDX, LCDXN and LCCX (continued) Thomas & Betts TBM12 TBM8 TBM6, 25000 B1. Cable Ties B2. Cable Accessories Burndy Y35, Y39, Y750, TBM14BSCR, Y46➄, Y750-2, TBM6BSCR, TBM8-750, TBM14M, BCT500HS, Y750BH, BAT35-14V, TBM6H TBM8-750M-1 TBM15 Y500CT-HS Y644M BAT750-14V, Pat750-18V B3.
PAGE 842
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties For use with Copper Conductors Installation Tooling and Die Selections for: Types LCAX, LCAXN, LCBX, LCDX, LCDXN and LCCX (continued) Panduit (See Compression Connector Tools Selection Guide, Pages D3.34 – D3.36) B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management Panduit Part Number Std.
PAGE 843
ELECTRICAL SOLUTIONS For use with Copper Conductors A. System Overview Installation Tooling and Die Selections for: Types LCAX, LCAXN, LCBX, LCDX, LCDXN and LCCX (continued) Thomas & Betts TBM12 TBM8 TBM6, 25000 B1. Cable Ties Burndy Y35, Y39, Y750, Y46➄, Y750-2, TBM14BSCR, Y750BH, TBM6BSCR, TBM8-750, TBM14M, BCT500HS, BAT35-14V, TBM6H TBM8-750M-1 TBM15 Y500CT-HS Y644M BAT750-14V, PAT750-18V MRC840 B2. Cable Accessories B3.
PAGE 844
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories For use with Copper Conductors How to read this chart For LCAF6 lug and CT-2931 crimping tool: Installation Tooling and Die Selections for: Types LCAF, LCCF, and SCSF Die Part Number CD-920-6 Blue P24 (1) Color Code Die Index Number Panduit (See Compression Connector Tools Selection Guide, Pages D3.34 – D3.
PAGE 845
ELECTRICAL SOLUTIONS For use with Copper Conductors A. System Overview Installation Tooling and Die Selections for: Types LCAF, LCCF, and SCSF (continued) B1. Cable Ties Panduit (See Compression Connector Tools Selection Guide, Pages D3.34 – D3.36) CT-930, CT-930CH, CT-2930, CT-2930/L, CT-2930/LE, CT-2931, CT-920, CT-920CH, CT-2920, CT-940CH➀, CT-2940➀ , CT-2940/L➀, CT-2940/LE➀ Panduit Part Number L = Lug S = Splice Die Part Number/Color Code and Die Index Number/ (Number Of Crimps) Std.
PAGE 846
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories For use with Copper Conductors How to read this chart For RSC4-6 splice and CT-2001 crimping tool: C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5.
PAGE 847
ELECTRICAL SOLUTIONS For use with Copper Conductors A. System Overview Installation Tooling and Die Selections for: Type RSC In-Line Reducing Splice (continued) B1. Cable Ties Panduit (See Compression Connector Tools Selection Guide, Pages D3.34–D3.
PAGE 848
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties For use with Copper Conductors Installation Tooling and Die Selections for: Type RSC In-Line Reducing Splice (continued) B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Reducing From Panduit Part Number Standard Wire Size Reducing To Cable Classes Wire Strip Length (In.) Standard Wire Size Cable Classes Wire Strip Length (In.
PAGE 849
ELECTRICAL SOLUTIONS For use with Copper Conductors A. System Overview Installation Tooling and Die Selections for: Type RSC In-Line Reducing Splice (continued) B1.
PAGE 850
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties For use with Copper Conductors Installation Tooling and Die Selections for: Type RSC In-Line Reducing Splice (continued) B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5.
PAGE 851
ELECTRICAL SOLUTIONS For use with Copper Conductors A. System Overview Installation Tooling and Die Selections for: Type RSC In-Line Reducing Splice (continued) B1. Cable Ties Thomas & Betts TBM20S, TBM25S Reducing Reducing From To TBM5, TBM6, TBM8 Reducing Reducing From To TBM12, 13642M Reducing Reducing From To TBM14BSCR, BPLT14BSCR, 13100A, TBM14M Reducing Reducing From To Color Code/Die Index Number/ (Number of Crimps) B2. Cable Accessories B3. Stainless Steel Ties C1.
PAGE 852
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories For use with Copper Conductors How to read this chart For PSCBRN-L parallel splice and CT-2001 crimping tool: Installation Tooling and Die Selections for: Type PSC Die Part Number Color Code CD-2001-2 Brown P33 (1) Die Index Number Number of Crimps B3. Stainless Steel Ties Panduit Crimping Tool Part Number (See Compression Connector Tools Selection Guide, pages D3.34 – D3.36) C1. Wiring Duct C2. Surface Raceway C3.
PAGE 853
ELECTRICAL SOLUTIONS For use with Copper Conductors How to read this chart For LCMA16 lug and CT-2001 crimping tool: A. System Overview Installation Tooling and Die Selections for: Types LCMA, LCMD, and SCMS B1.
PAGE 854
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories For use with Copper or Aluminum Conductors How to read this chart For LAA6 and CT-2931 crimping tool: B3. Stainless Steel Ties C1. Wiring Duct Panduit Part Number L = Lug S = Splice SA6 LAA4 SA4 C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5.
PAGE 855
ELECTRICAL SOLUTIONS For use with Copper or Aluminum Conductors A. System Overview Installation Tooling and Die Selections for: Types LAA, LAB, and SA (continued) B1. Cable Ties B2.
PAGE 856
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4.
PAGE 857
ELECTRICAL SOLUTIONS For use with Copper or Aluminum Conductors Installation Tooling and Die Selections for: Type SAR (continued) A. System Overview B1. Cable Ties B2. Cable Accessories Thomas & Betts TBM5 TBM8 TBM15, TBM15I, TBM15BSCR Burndy MY29 Y35, Y39, Y750, Y750-HS, BAT35, BAT750, PAT750, Y35BH, Y39BH, Y750BH, Y750-2, Y750BH-2 Anderson B3.
PAGE 858
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories For use with Copper or Aluminum Conductors C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index D3.
PAGE 859
ELECTRICAL SOLUTIONS For use with Copper or Aluminum Conductors A. System Overview Installation Tooling and Die Selections for: Type BPC (continued) B1. Cable Ties Thomas & Betts 13642M TBM8 B2.
PAGE 860
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Installation Tooling and Die Selections for: For use with Copper Conductors How to read this chart For GCE250-1/0 and CT-2930 tool: Types GCE, GCC and GPC Die Part Number Color Code CD-930G-250 Black PG25 (1) Installation Tools Die Index Number 12 TON 14 TON Number of Crimps B3. Stainless Steel Ties Panduit C1.
PAGE 861
ELECTRICAL SOLUTIONS For use with Copper Conductors How to read this chart For CTAPF4-6 tap and CT-2001 crimping tool: Installation Tooling and Die Selections for: Type CTAP B1. Cable Ties Die Part Number B2. Cable Accessories CD-2001-BG (2) Panduit Number of Crimps Panduit Part Number A. System Overview Wire Strip Length (In.
PAGE 862
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories For use with Copper Conductors Installation Tooling and Die Selections for: Type CTAPF Die Part Number How to read this chart CD-2001-4 Color For Die Index Gray P29 CTAPF6-12 tap Code Number (1) and CT-2001 crimping tool: Panduit Number of Crimps B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 863
ELECTRICAL SOLUTIONS For use with Copper Conductors A. System Overview Installation Tooling and Die Selections for: Type CTAPF (continued) B1.
PAGE 864
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories For use with Copper Conductors How to read this chart For HTCT6X-6X tap and CT-2931 crimping tool: Installation Tooling and Die Selections for: Type HTCT Installation Tools Die Part Number 15 TON 14 TON CD-920H-6 PH6 12 TON Panduit CT-940CH➀ CT-2940➀, CT-2940/L➀, CT-2940/LE➀, Die Index Number B3.
PAGE 865
ELECTRICAL SOLUTIONS A. System Overview NOTES B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S.
PAGE 866
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management LABELING SYSTEMS Panduit is a global leader in reliable and innovative solutions for identification and safety. Products are engineered for a wide variety of industries and applications – including electrical, electronics, industrial and network.
PAGE 867
ELECTRICAL SOLUTIONS A. System Overview PRINTERS: THERMAL TRANSFER DESKTOP AND HAND-HELD Panduit desktop thermal transfer printers enable fast, high quality label production for all your identification requirements. Use Panduit labeling software and desktop thermal transfer printers to produce on demand identification solutions quickly and economically. Panduit hand-held printers are designed for flexibility. Programmed with advanced functionality, Panduit printers make custom labeling easy.
PAGE 868
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 869
ELECTRICAL SOLUTIONS A. System Overview Hand-Held Thermal Transfer Printing Solutions B1. Cable Ties P a n T h e r™ L S 8 E B2. Cable Accessories C o u g a r™ L S 9 Self-Laminating Labels Page E1.3 Die-Cut Vinyl Cloth Labels Page E1.6 Turn-Tell ™ Labels Page E1.6 Marker Plates Page E1.7 Flag Labels Page E1.7 Die-Cut Heat Shrink Tubing Page E1.9 Die-Cut Component Labels Page E1.10 Vinyl Cloth Continuous Tapes Page E1.5 Page E1.5 Nylon Cloth Continuous Tapes Page E1.5 Page E1.
PAGE 870
ELECTRICAL SOLUTIONS A. System Overview P1 ™ Self-Laminating Label Cassettes for PanTher ™ LS8E Hand-Held Thermal Transfer Printer (continued) B1. Cable Ties B2. Cable Accessories Part Number S050X075VAC S050X125VAC B3. Stainless Steel Ties S050X150VAC S075X075VAC C1. Wiring Duct S075X100VAC S075X125VAC C2. Surface Raceway S075X150VAC C3. Abrasion Protection S100X125VAC C4. Cable Management S100X150VBC D1. Terminals D2. Power Connectors D3.
PAGE 871
ELECTRICAL SOLUTIONS A. System Overview P1™ Non-Laminated Label Cassettes • P1 ™ Label Cassette contains an integrated memory device for automatic formatting, recall of last legend used, and number of labels remaining in the cassette • Fast loading label cassette includes both label material and ribbon to make changing labels easy • Non-laminated adhesive labels for wire/cable identification B1. Cable Ties B2. Cable Accessories B3.
PAGE 872
ELECTRICAL SOLUTIONS A. System Overview P1™ Non-Laminated Label Cassettes (continued) B1. Cable Ties Part Number Width In. mm Part Description Length In. mm Min. Cable O.D. In. mm Max. Cable O.D. In. mm Std. Pkg. Qty. Std. Ctn. Qty. Die-Cut – For Use in PanTher ™ LS8E Hand-Held Thermal Transfer Printers B2. Cable Accessories N050X075CBC B3. Stainless Steel Ties N100X125CBC C1. Wiring Duct N100X175CBC White, perforated vinyl cloth label for 18 – 14 AWG wires, 125/cassette.
PAGE 873
ELECTRICAL SOLUTIONS A. System Overview P1 ™ Marker Plate Label Cassettes for PanTher ™ LS8E Hand-Held Thermal Transfer Printer • Fast loading P1 ™ Label Cassette includes both label material and ribbon to make changing labels easy • Marker plates are designed for use on larger diameter wire/cables and may be applied after all terminations are complete • Meets requirements for MIL-STD-202F, Notice 12 Method 215J • Temperature range: -40°F to 176°F (-40°C to 80°C) B1. Cable Ties B2.
PAGE 874
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 875
ELECTRICAL SOLUTIONS P1 ™ Military Grade Die-Cut Heat Shrink Label Cassettes for PanTher ™ LS8E Hand-Held Thermal Transfer Printer • P1 ™ Label Cassette contains an integrated memory device for automatic formatting, recall of last legend used, and number of labels remaining in the cassette • Fast loading label cassette includes both label material and ribbon to make changing labels easy • Meets print performance requirements of MIL-M-81531 and MIL-STD-202F Method 215A, Solution A, C, and D A.
PAGE 876
ELECTRICAL SOLUTIONS A. System Overview P1 ™ General Component Label Cassettes for PanTher ™ LS8E Hand-Held Thermal Transfer Printers B1. Cable Ties B2.
PAGE 877
ELECTRICAL SOLUTIONS A. System Overview P1 ™ Continuous Tape Cassettes for PanTher ™ LS8E and Cougar ™ LS9 Hand-Held Thermal Transfer Printers B1.
PAGE 878
ELECTRICAL SOLUTIONS A. System Overview P1 ™ Continuous Tape Cassettes for PanTher ™ LS8E and Cougar ™ LS9 Hand-Held Thermal Transfer Printers (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3.
PAGE 879
ELECTRICAL SOLUTIONS A. System Overview TDP43MY Thermal Transfer Desktop Printer and Accessories • Compact, lightweight design enables use in office or remote locations • 300 dpi thermal transfer printer creates crisp, clear legends with superior legibility • Up to 2.00 inches per second print speed for fast label production • Use to print a wide variety of self-laminating labels, component labels, non-laminated labels, heat shrink labels, marker plates and continuous tapes up to 4.
PAGE 880
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties TDP42HY, TDP43HY, TDP46HY Thermal Transfer Desktop Printers • Rugged, high speed industrial printer • 203, 305, or 609 dpi thermal transfer printers create crisp, clear legends with superior legibility • Up to 10.00 inches per second print speed for fast label production B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Part Number TDP42HY TDP43HY TDP46HY C2.
PAGE 881
ELECTRICAL SOLUTIONS A. System Overview LABELING SOFTWARE Panduit labeling software is custom designed to address your requirements for wire/cable labeling, component identification, network administration, as well as, safety and facility identification. From control panel wire identification, terminal block and facility pipe marking to patch panel, faceplate and wire/cable marking, Panduit software is the solution for your on-demand identification requirements. B1. Cable Ties B2. Cable Accessories B3.
PAGE 882
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 883
ELECTRICAL SOLUTIONS A. System Overview LABELS: LASER, INK JET, AND THERMAL TRANSFER Panduit provides a full line of on demand printable labels designed to meet all of your identification needs. B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties • Laser/ink jet labels supplied on 8.50" x 11.
PAGE 884
ELECTRICAL SOLUTIONS A. System Overview Laser/Ink Jet Self-Laminating Labels • Labels can be printed in both laser and ink jet printers • Self-laminating adhesive labels include a colored print-on area and clear overlaminate B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Part Number System for Self-Laminating Labels C1. Wiring Duct S C2. Surface Raceway Label Type C3. Abrasion Protection 1 0 0 X 1 Length (In.) “X” Width (In.
PAGE 885
ELECTRICAL SOLUTIONS A. System Overview Laser/Ink Jet Self-Laminating Labels (continued) Part Number S050X075YAJ S050X125YAJ S050X150YAJ S075X075YAJ S075X125YAJ S075X150YAJ S100X075YAJ S100X125YAJ S100X150YAJ* S100X225YAJ* S100X400YAJ S100X650YAJ S150X400YAJ S150X400YIJ S200X150YAJ S200X225YAJ S200X400YAJ S200X650YAJ Part Description White print-on area, polyester label for 18 – 14 AWG wire. White print-on area, polyester label for 12 – 10 AWG wire. White print-on area, polyester label for Cat. 5e/Cat.
PAGE 886
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Laser/Ink Jet Non-Laminated Labels • Labels can be printed in both laser/ink jet printers • Use as a wrap around label or flag style labels for wire/cable labeling • Available in polyolefin material and supplied on 8.50" x 11.00" sheets • Panduit labeling software packages include all label formats for quick and easy label production B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Part Number System for Non-Laminated Labels C2.
PAGE 887
ELECTRICAL SOLUTIONS A. System Overview Laser/Ink Jet Flag Style Labels B1. Cable Ties B2. Cable Accessories Part Number N050X150FJJ Part Description White, polyolefin label. Width In. mm .50 12.70 N100X150FJJ White, polyolefin label. 1.00 25.40 Length In. mm 1.50 38.10 Min. Cable O.D. In. mm .06 1.52 Max. Cable O.D. In. mm .15 3.81 Std. Pkg. Qty. 5000 Std. Ctn. Qty. 25000 1.50 .12 .22 2500 10000 38.10 3.05 5.58 B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 888
ELECTRICAL SOLUTIONS A. System Overview Laser/Ink Jet Component Labels (continued) B1. Cable Ties Height In. mm 0.38 9.7 Std. Pkg. Qty. 10000 Std. Ctn. Qty. 50000 Part Number C038X038YJJ White, polyester label. Width In. mm 0.38 9.7 C038X038YLJ Yellow, polyester label. 0.38 9.7 0.38 9.7 10000 50000 C050X044YJJ White, polyester label. 0.50 12.7 0.44 11.2 10000 50000 C060X020YJJ White, polyester label. 0.60 15.3 0.20 5.1 10000 50000 B3.
PAGE 889
ELECTRICAL SOLUTIONS A. System Overview Thermal Transfer Self-Laminating Labels • Self-laminating adhesive labels supplied on rolls, include a colored print-on area and clear overlaminate • Use with Panduit RMH4BL hybrid thermal transfer ribbon B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1.
PAGE 890
ELECTRICAL SOLUTIONS A. System Overview Thermal Transfer Self-Laminating Labels (continued) B1. Cable Ties Max. Wire O.D. In. mm 0.16 4.04 Std. Std. Pkg. Ctn. Qty. Qty. 5000 20000 3.1 0.28 7.0 5000 20000 0.16 4.0 0.32 8.1 5000 20000 6.4 0.08 2.0 0.16 4.0 2500 10000 0.25 6.4 0.08 2.1 0.16 4.0 5000 10000 31.8 0.38 9.7 0.12 3.1 0.28 7.0 2500 10000 1.25 31.8 0.38 9.7 0.12 3.1 0.28 7.0 5000 10000 25.4 1.50 38.1 0.50 12.7 0.16 4.0 0.32 8.1 2500 30000 1.00 25.
PAGE 891
ELECTRICAL SOLUTIONS A. System Overview Thermal Transfer Self-Laminating Labels (continued) B1. Cable Ties Print-On Area Min. Cable Height O.D. In. mm In. mm 0.75 19.1 0.24 6.06 Max. Wire O.D. In. mm 0.48 12.1 Std. Std. Pkg. Ctn. Qty. Qty. 5000 20000 6.1 0.48 12.1 5000 20000 0.24 6.1 0.48 12.1 5000 20000 0.24 6.1 0.48 12.1 5000 20000 Width In. mm 1.00 25.4 Length In. mm 2.25 57.2 S100X225VETY* Gray print-on area, vinyl label for 8 – 4 AWG wires. 1.00 25.4 2.25 57.2 0.75 19.1 0.
PAGE 892
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 893
ELECTRICAL SOLUTIONS A. System Overview Thermal Transfer Non-Laminated Labels • Labels offer crisp, clear legends with superior legibility • Use as a wrap-around label or flag style marker for wire/cable labeling • Available in vinyl cloth material for long-term or temporary labeling and supplied on rolls • Panduit labeling software packages include all label formats for quick and easy label production B1. Cable Ties B2. Cable Accessories B3.
PAGE 894
ELECTRICAL SOLUTIONS A. System Overview B1.
PAGE 895
ELECTRICAL SOLUTIONS A. System Overview Thermal Transfer Military Grade Heat Shrink Labels (continued) H100X084H1T* Part Description White, 1/2" diameter polyolefin, 1000/roll. Width In. mm 1.00 25.4 Length In. mm 0.84 21.3 Min. Cable O.D. In. mm 0.170 4.3 Max. Cable O.D. In. mm 0.50 12.7 H100X165H1T* White, 1" diameter polyolefin, 500/roll. 1.00 25.4 1.65 41.9 0.33 8.4 1.00 25.4 1 H150X025H1T* White, 1/8" diameter polyolefin, 500/roll. 1.50 38.1 0.25 6.4 0.04 1.0 0.13 3.
PAGE 896
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2.
PAGE 897
ELECTRICAL SOLUTIONS A. System Overview 2-Sided Military Grade Printable Heat Shrink Labels (continued) Part Number* H200X025H1T-2-B Width In. mm 2.00 50.8 Part Description 2-sided Military Grade printable heat shrink label, white, 1/8" diameter polyolefin, 2500/roll. Height In. mm 0.25 6.4 Min. Cable O.D. In. mm 0.04 1.0 Max. Wire O.D. In. mm 0.13 3.3 Std. Pkg. Qty. 1 Std. Ctn. Qty. — H200X034H1T-2 2-sided Military Grade printable heat shrink label, white, 3/16" (4.
PAGE 898
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Thermal Transfer Component Labels • Labels offer crisp, clear legends with superior legibility • Available in polyester, vinyl cloth, and polyimide materials and supplied on rolls • Designed for use with thermal transfer desktop printers, including the TDP43MY and TDP42HY printers • Panduit labeling software packages include all label formats for quick and easy label production B2. Cable Accessories B3. Stainless Steel Ties C1.
PAGE 899
ELECTRICAL SOLUTIONS A. System Overview Thermal Transfer Component Labels (continued) Part Number C025X025KBT Part Description White, polyimide label. In. 0.25 mm 6.4 In. 0.25 mm 6.4 Std. Pkg. Qty. 10000 C025X025KCT Tan, polyimide label. 0.25 6.4 0.25 6.4 10000 C025X025YJT White, polyester label. 0.25 6.4 0.25 6.4 10000 40000 C038X038KBT White, polyimide label. 0.38 9.7 0.38 9.7 10000 40000 C038X038KCT Tan, polyimide label. 0.38 9.7 0.38 9.
PAGE 900
ELECTRICAL SOLUTIONS A. System Overview Thermal Transfer Component Labels (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions Part Number C125X038YJT Part Description White, polyester label. In. 1.
PAGE 901
ELECTRICAL SOLUTIONS A. System Overview Thermal Transfer Tamper Evident Polyester Component Labels • Labels offer crisp, clear legends with superior legibility • Panduit labeling software packages include all label formats for quick and easy label production Width Part Number C075X025AAT C100X050AAT C200X100AAT C275X125AAT Part Description Tamper-evident polyester, silver, for indoor/outdoor applications. Tamper-evident polyester, silver, for indoor/outdoor applications.
PAGE 902
ELECTRICAL SOLUTIONS A. System Overview Thermal Transfer Raised Panel Labels (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway Part Number C180X180APT-30 C180X180A8T-30 C180X180AST-30 C180X180AWT-30 C180X180A0T-30 C180X180YK-30* C240X240APT-30 C240X240A8T-30 C240X240AST-30 C240X240AWT-30 C240X240A0T-30 C240X240YK-30* Part Description White, raised panel component label. Yellow, raised panel component label.
PAGE 903
ELECTRICAL SOLUTIONS A. System Overview Thermal Transfer Continuous Tapes • Tapes offer crisp, clear legends with superior legibility • Available in continuous color vinyl or clear polyester and supplied on rolls • Panduit labeling software packages include all label formats for quick and easy label production B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Part Number System for Continuous Tapes T 4 Label Type 0 0 X “X” Width (In.) 0 0 Length (Ft.
PAGE 904
ELECTRICAL SOLUTIONS A. System Overview Thermal Transfer Continuous Tapes (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors Part Number T100X000VP1Y T100X000VQ1Y T100X000VS1Y T100X000VU1Y T100X000VW1Y T100X000VX1Y T100X000VY1Y T100X000YK1 T200X000VP1Y T200X000VQ1Y T200X000VS1Y T200X000VU1Y Part Description White, vinyl tape.
PAGE 905
ELECTRICAL SOLUTIONS A. System Overview Size Illustrations of Self-Laminating Labels S050X075* S050X125* S050X150* S075X075* S075X125* S075X150* S100X075* S100X125* B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties S100X150* S100X225* S100X400* S150X150* S150X225* C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals S150X400* D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3.
PAGE 906
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Size Illustrations of Self-Laminating Labels (continued) S100X650* S200X225* S200X650* B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway S200X400* C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index E2.
PAGE 907
ELECTRICAL SOLUTIONS Size Illustrations of Non-Laminated and Flag Style Labels A. System Overview B1. Cable Ties B2. Cable Accessories N050X075* N025X075* B3. Stainless Steel Ties N050X100* N025X125* N050X125* N025X150* C1. Wiring Duct N050X150* N050X175* N025X175* C2. Surface Raceway C3. Abrasion Protection N100X075* C4. Cable Management N100X125* N100X150* N100X175* D1. Terminals *Represents material type and print method of part number. D2. Power Connectors D3.
PAGE 908
ELECTRICAL SOLUTIONS A. System Overview Size Illustrations of Flattened Heat Shrink Labels B1. Cable Ties B2. Cable Accessories H075X025* H050X025* H075X044* H050X044* H050X064* B3. Stainless Steel Ties C1. Wiring Duct H075X034* H050X034* H100X025* H100X034* H100X044* H100X064* C2. Surface Raceway H100X084* C3. Abrasion Protection H100X165* C4. Cable Management D1. Terminals H150X025* H150X034* H150X044* D2. Power Connectors D3. Grounding Connectors H200X025* H200X034* H200X044* E1.
PAGE 909
ELECTRICAL SOLUTIONS A. System Overview Size Illustrations for Component Labels B1. Cable Ties C060X020* C075X025* C080X020* C100X025* C025X025* C038X038* C100X050* C050X044* C160X020* B2. Cable Accessories B3. Stainless Steel Ties C200X050* C150X075* C1. Wiring Duct C2. Surface Raceway C200X075* C3. Abrasion Protection C200X100* C4. Cable Management D1. Terminals C300X100* D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems C400X100* C225X450* E2. Labels E3.
PAGE 910
ELECTRICAL SOLUTIONS A. System Overview Size Illustrations for Component Labels (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management C400X400* D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions C400X600* C350X500* C500X700* F. Index E2.
PAGE 911
ELECTRICAL SOLUTIONS A. System Overview PRE-PRINTED AND WRITE-ON MARKERS Panduit offers a variety of pre-printed and write-on marker solutions in multiple formats to meet your specific requirements. B1. Cable Ties B2. Cable Accessories B3.
PAGE 912
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pre-Printed Marker Books • Convenient, pocket-sized book • Markers are perforated and can be torn in half to mark both ends of conductors B2. Cable Accessories • Terminal block markers are included to properly identify connectors • Ten pages of markers per book Material Chart Material B3.
PAGE 913
ELECTRICAL SOLUTIONS A. System Overview Blank Self-Laminating Write-On Cable Marker Books • 10 pages of markers per book • Clear section of marker over laminates and protects printed legend • Markers have ink receptive area to allow handwritten legends B1. Cable Ties Width Part Number PSCB-12Y PSCB-13Y PSCB-16Y PSCB-3Y PSCB-3YELY* PSCB-5Y PSCB-6Y In. 0.50 1.50 1.50 1.00 1.00 1.00 1.00 mm 12.7 38.1 38.1 25.4 25.4 25.4 25.4 Length In. mm 1.50 38.1 3.00 76.2 6.00 152.4 3.00 76.2 3.00 76.2 5.00 127.0 6.
PAGE 914
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pre-Printed Marker Cards PCM Type • Marker cards printed in a variety of legends allows “kitting” for project builds • Plastic liner provides easy removal of markers while protecting unused markers Material Chart B2. Cable Accessories Material Vinyl Cloth, White Print Method Pre-Printed B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection PCM-7 C4. Cable Management D1. Terminals D2. Power Connectors D3.
PAGE 915
ELECTRICAL SOLUTIONS A. System Overview Pre-Printed Marker Cards PCM Type (continued) B1. Cable Ties PCM-A1 Part Number PCM-A thru PCM-Z PCM-A-Z PCM-A-Z-0-9 PCM-A1 thru PCM-A4 PCM-B1 thru PCM-B5 PCM-C1 thru PCM-C4 PCM-E1 thru PCM-E3 PCM-F1 thru PCM-F4 PCM-H1 thru PCM-H5 PCM-L1 thru PCM-L5 PCM-M1 thru PCM-M2 PCM-P1 thru PCM-P3 PCM-R1 thru PCM-R5 PCM-S1 thru PCM-S5 PCM-T1 thru PCM-T9 PCM-X1 thru PCM-X4 Legend A thru Z Width In. mm Length In. mm Markers Per Card Std. Std. Pkg. Ctn. Card(s) Card(s) 0.
PAGE 916
ELECTRICAL SOLUTIONS A. System Overview Pre-Printed Marker Cards PCM Type (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3.
PAGE 917
ELECTRICAL SOLUTIONS A. System Overview Wire Marker Card Number Combination Packs Numbers Letters Part Number PCMCP-1-25* PCMCP-26-50* PCMCP-51-75* PCMCP-76-100* PCMCP-101-125* PCMCP-126-150* PCMCP-A-Z** Cards Per Legend 1 each 1 each 1 each 1 each Legend 1 thru 25 26 thru 50 51 thru 75 76 thru 99 100 101 thru 125 126 thru 150 A thru Z Markers Per Card 36 36 25 1 each 1 each 1 each 25 36 Std. Pkg. Qty. 1 1 1 1 Std. Ctn. Qty. 4 4 4 4 1 1 1 4 4 4 Marker size: Full size marker – 1.50" (38.10mm).
PAGE 918
ELECTRICAL SOLUTIONS A. System Overview Pre-Printed Marker Cards PPM Type B1. Cable Ties Material Chart B2. Cable Accessories Material High Temp, White B3. Stainless Steel Ties Print Method Pre-Printed PPM-1-33 C3. Abrasion Protection C4. Cable Management Features -40°F to 275°F (-40°C to 135°C) Indoor/outdoor rated; self-extinguishing; ideal for component labeling in harsh environments PPM-7 C1. Wiring Duct C2.
PAGE 919
ELECTRICAL SOLUTIONS A. System Overview Write-On Marker Cards – Self-Laminating • Clear section of marker overlaminates and protects write-on legend • Markers have ink receptive area to allow hand-written legends B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct Type PSCC Part Number PSCC-3Y PSCC-5Y PSWM-375Y PSWM-750Y PSWM-1500Y PSWMH-375Y PSWMH-750Y Type PSWM Width In. mm 1.00 25.40 1.00 25.40 0.38 9.53 0.75 19.05 1.50 38.05 0.38 9.53 0.75 19.05 Length In. mm 3.00 76.
PAGE 920
ELECTRICAL SOLUTIONS A. System Overview Pre-Printed Marker Tape Refills B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3.
PAGE 921
ELECTRICAL SOLUTIONS A. System Overview Self-Laminating Wire Marker Dispenser • Self-laminating labels are provided in handy dispenser which protects markers when not in use • Clear section of marker overlaminates and protects write-on legend • Quick, easy to use for smaller installations and maintenance B1. Cable Ties Material Chart Material Part Number Pre-Printed Width In. mm Part Description Temperature Range Print Method Self-Laminating Vinyl, White Print-On B2.
PAGE 922
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Pre-Printed Clip-On Wire Markers (continued) Part Number Legend No. of Markers Per Wand Markers Per Pkg. Std. Pkg. Qty. Std. Ctn. Qty. 1 10 1 1 1 10 10 10 1 10 1 1 1 10 10 10 1 10 1 1 1 10 10 10 1 10 1 1 1 10 10 10 1 10 1 1 1 10 10 10 1 10 1 1 1 10 10 10 60 1 10 80 1 1 1 1 1 1 1 10 10 10 10 10 10 10 60 1 10 1 1 1 1 10 10 10 10 1 10 Wire/Cable Diameter 0.11" – 0.13" (2.80mm – 3.30mm) B2. Cable Accessories B3.
PAGE 923
ELECTRICAL SOLUTIONS A. System Overview PERMANENT IDENTIFICATION Panduit offers the widest range of permanent identification solutions in the industry to withstand the test of time and provide legibility in harsh environments. Safe, quick, and easy to install, Panduit permanent identification solutions include stainless steel and aluminum marker plates, tags, marking tools and ties to deliver improved productivity and workplace safety. B1. Cable Ties B2. Cable Accessories B3.
PAGE 924
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Panduit Factory Custom Marking Service Panduit factory custom marking service simplifies identification with high quality, made-to-order custom embossed marker plates and tags or laser etched cable ties, marker plates, and tags. Panduit offers rapid direct shipment with fast turn around on custom marking orders worldwide. Work with Panduit to create an effectively identified workplace.
PAGE 925
ELECTRICAL SOLUTIONS A. System Overview Stainless Steel and Brass Marker Plates and Tags • Provides permanent identification of pipes, conduit, valves, cables and equipment in harsh environments • Designed for use with Panduit ® Pan-Steel ® Stainless Steel Cable Ties for fast installation at lowest installed cost • All marker plates/tags can be embossed or laser etched with Panduit Factory Custom Marking Service • For on-site custom marking see page E4.
PAGE 926
ELECTRICAL SOLUTIONS A. System Overview Stainless Steel and Brass Marker Plates and Tags (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties MT350-C MT350W17-Q MT172-C MT172W38-C MTB1D-Q MTB150D-Q MTB213D-Q MT125S-Q C1. Wiring Duct C2. Surface Raceway Custom Marking Parameters* C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3.
PAGE 927
ELECTRICAL SOLUTIONS A. System Overview Aluminum Marker Plates – Pan-Alum ™ MMP Series • Lightweight, aluminum construction for flexibility and ease of handling • Five color options in addition to natural aluminum provide quick visual identification, ideal for applications requiring color-coding B1. Cable Ties • Easy feed marker plate design includes a raised slot to simplify cable tie installation and improve productivity B2. Cable Accessories B3. Stainless Steel Ties C1.
PAGE 928
ELECTRICAL SOLUTIONS A. System Overview Metal Indenting Machine B1. Cable Ties • Provides quick, easy, and permanent identification with Panduit ® Pan-Alum ™ Marker Plates and Cable Ties and Pan-Steel ® Stainless Steel Marker Plates, Tags, Cable Ties and Straps B2. Cable Accessories • Automatic table indexing advances material forward for convenience and improved productivity • New, improved design features aluminum base and durable construction Part Number Std. Pkg. Qty.
PAGE 929
ELECTRICAL SOLUTIONS A. System Overview LOCKOUT/TAGOUT The Occupational Safety and Health Administration (OSHA) mandates that all energy sources be isolated and locked out to protect employees from injuries caused by the accidental startup of equipment under repair or service. OSHA 1910.147 outlines the control of this hazardous energy with an effective lockout/tagout program. Panduit offers a complete line of lockout/tagout products to aid in compliance with OSHA 1910.147 including: B1. Cable Ties B2.
PAGE 930
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties OSHA Lockout/Tagout Compliance and Training Kit •Takes you step-by-step through the process of bringing your company into compliance with OSHA Standard 1910.147; also provides training materials and devices for educating employees on the elements and applications of lockout tagout B2. Cable Accessories B3.
PAGE 931
ELECTRICAL SOLUTIONS A. System Overview “No Tool” Circuit Breaker Lockout Devices • Individual circuit breaker can be locked in the off position quickly and easily without any tools • Compact, universal design fits a wide range of single, double, and triple handle circuit breakers • Accommodates breaker handle sizes ranging from .30 – .60 inches (7.62mm – 15.24mm) tall and .16 – .35 inches (4.06mm x 8.
PAGE 932
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Plug Lockout Device • Individual plugs in a wide range of sizes can be locked out to prevent energization • Accommodates padlocks with shackle lengths of 1.50 inches (38.10mm) or greater and plugs with a hole in a blade • Constructed of rugged polycarbonate providing strength, durability, added security and corrosion resistance B2. Cable Accessories Part Number PSL-P PSL-PI B3. Stainless Steel Ties Part Description Plug lockout.
PAGE 933
ELECTRICAL SOLUTIONS A. System Overview Toggle Switch Lockout Device • Compact secure design fits most toggle switches and some small circuit breakers • Easily attached without removal of faceplate or screws Part Number PSL-WS • Accommodates switches .45 – .78 inches (11.43mm – 19.81mm) tall x .25 – .38 inches (6.35mm – 9.65mm) wide x .25 – .40 inches (6.35mm – 10.
PAGE 934
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Ball Valve Lockout Devices • Ball valves regulating hydraulic, pneumatic, and chemical energy can be locked out quickly and easily • Accommodates valve diameters ranging from .25 inches (6.35mm) to 3.00 inches (76.20mm) B2. Cable Accessories Part Number PSL-BV1 PSL-BV2 B3. Stainless Steel Ties PSL-BV3 PSL-BFV C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2.
PAGE 935
ELECTRICAL SOLUTIONS A. System Overview Electrician Lockout Kit • Kit contains a variety of lockout/tagout devices commonly used by an individual electrician Part Number PSL-PK-EA (1) (1) (1) (1) (1) (1) (1) (5) Contents Screwdriver. PSL-PK pouch. PSL-8 red non-conductive lockout padlock. PSL-MLD multiple lockout device. PSL-WS wall switch lockout device. PSL-CBNT “No Tool” circuit breaker lockout device. PSL-P plug lockout device. PVT-30 electrician’s blocking tags. Std. Std. Pkg. Ctn. Qty. Qty.
PAGE 936
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Metal Wall Mount Cabinet • Conveniently store lockout tools and accessories in one common area B2. Cable Accessories Part Number PSL-STATION PSL-PK PSL-KT PSL-BX B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway Std. Pkg. Qty. 1 1 1 1 Part Description Metal wall mount cabinet. Empty pouch for PSL-PK-EA. Empty plastic kit box for PSL-KT-CONA. Empty plastic kit Box for PSL-KT-MROA.
PAGE 937
ELECTRICAL SOLUTIONS A. System Overview Warning Label • Warning label prohibits tampering with push buttons during repair or service • Write-on area for adding your own warning message • Made of vinyl cloth material that allows label to be removed easily after repairs are completed • Features the international prohibition symbol for “Do Not Throw Switch” B2.
PAGE 938
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Non-Conductive Lockout Padlocks • Non-conductive lock body and shackle provide protection against electrical hazards • Available in six assorted colors for quick visual color identification • Padlocks can be ordered with various keying options (keyed-alike and master-keyed) Part Number PSL-8 PSL-8BL PSL-8BU PSL-8GR PSL-8OR PSL-8YL PSL-8BR PSL-8PU B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3.
PAGE 939
ELECTRICAL SOLUTIONS A. System Overview Laminated Steel Padlocks • Standard locks are keyed differently – each padlock is supplied with two keys • Hardened steel shackle with double-ball locking mechanism provides protection from cutting, prying, and rusting • Available in six vinyl bumper colors for quick visual color identification • Padlocks can be ordered with various keying options (keyed-alike and master-keyed) • Galvanized layer design provides corrosion resistance in harsh environments B1.
PAGE 940
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Self-Laminating Padlock Labels • Used to identify employees’ locks; employees sign the label, attach it to the padlock, and overwrap with the clear vinyl to protect the legend • Available in six colors for departmental coding • One-piece design is easy to use B2. Cable Accessories Width Part Number PSL-PL1BLKY PSL-PL1BLUY PSL-PL1GRNY PSL-PL1REDY PSL-PL1WHTY PSL-PL1YELY B3. Stainless Steel Ties C1.
PAGE 941
ELECTRICAL SOLUTIONS A. System Overview Metal I.D. Tags and Collars PSL-TG1 MTB1D-Q PSL-SC Part Number PSL-TG1 PSL-SC MTB1D-Q MT172W38-C Part Description Brass padlock identification tag. Padlock shackle collar and rivet. Marker tag, 1.00" circular, brass. Marker tag, one hole, 304 Stainless Steel, rectangle, 1.72" x .38". Std. Std. Pkg. Ctn. Qty. Qty. 12 48 12 48 25 250 100 1000 B1. Cable Ties B2. Cable Accessories MT172W38-C B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 942
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Write-On Safety Tags • Meet OSHA Standard 1910.147 requirements for tagout applications • Semi-rigid plastic tags are 3.00" (76.00mm) W x 5.75" (146.00mm) H with a .38" (9.00mm) brass grommet for greater strength and increased durability • Tags can be attached with a lockout device or with a Panduit PLT2S nylon tie (50 lb. loop tensile strength) supplied with each tag B3.
PAGE 943
ELECTRICAL SOLUTIONS A. System Overview Write-On Safety Tags (continued) B1. Cable Ties B2. Cable Accessories DANGER LIVE WIRE B3. Stainless Steel Ties C1. Wiring Duct Signed By: Date: PANDUIT Front PVT-43 Back Front PVT-44 PVT-44-Q Back Front PVT-56 PVT-56-Q Back C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors Front PVT-57-Q Back Front PVT-62-Q Back Front PVT-96 PVT-96-Q Back D3. Grounding Connectors E1.
PAGE 944
ELECTRICAL SOLUTIONS A. System Overview Write-On Safety Tags (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway Front PVT-148-Q Back Front PVT-150-Q Back Front PVT-153-Q Back C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors Front PVT-155-Q Back Front PVT-156-Q Front PVT-160-Q Back Front PVT-157-Q Back E1. Labeling Systems E2. Labels E3.
PAGE 945
ELECTRICAL SOLUTIONS A. System Overview Bilingual Write-On Safety Tags • Meet OSHA Standard 1910.147 requirements for tagout applications • Semi-rigid plastic tags are 3.00"W x 5.75"H (76.00mm x 146.00mm) with a .38" (9.00mm) brass grommet for greater strength and increased durability • Tags can be attached with a lockout device or with a Panduit PLT2S nylon tie (50 lb.
PAGE 946
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Self-Laminating Photo Tags • Semi-rigid plastic tags with polyester laminate to protect photos and other written data are 3.00"W x 5.75"H (76.00mm x 146.00mm) with a .38" (9.00mm) brass grommet for greater strength and durability • Tags have write-on surface and can be attached with a lockout device or with a Panduit PLT2S nylon tie (50 lb.
PAGE 947
ELECTRICAL SOLUTIONS A. System Overview Lockout/Tagout Safety Signs Indoor/Outdoor Sub-Surface Printed Adhesive Polyester (Type PPS) • High quality signs for use indoors and outdoors • Excellent resistance to UV light, chemical atmosphere, and abrasion • Excellent life and adhesion properties • Printed graphics are protected by clear polyester laminate Indoor/Outdoor Rigid Polyethylene (Type PRS) • Rugged signs for indoors and outdoors • Abrasion resistant • Used where adhesives will not work B1.
PAGE 948
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1.
PAGE 949
ELECTRICAL SOLUTIONS A.
PAGE 950
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1.
PAGE 951
ELECTRICAL SOLUTIONS A. System Overview SAFETY AND FACILITY IDENTIFICATION Panduit offers a full line of safety and facility identification products to ensure employee safety with an effectively identified workplace. B1. Cable Ties B2. Cable Accessories B3.
PAGE 952
ELECTRICAL SOLUTIONS A. System Overview Electrical Hazard Safety Signs Material Chart B1. Cable Ties Material Polyester (PPS) B2. Cable Accessories Rigid Polyethylene (PRS) B3. Stainless Steel Ties Print Method Pre-Printed Temperature Features Range -40°F to 275°F Indoor/outdoor rated; laminated label material (-40°C to 135°C) protects legend from abrasion and chemicals; resistant to UV light, chemical atmosphere, and abrasion; excellent life and adhesion properties.
PAGE 953
ELECTRICAL SOLUTIONS A. System Overview Short Circuit Warning Signs • Aids in compliance with UL 508A requirement B1. Cable Ties Material Chart WARNING RISK OF FIRE OR ELECTRIC SHOCK Material Polyester (PPS) Print Method Pre-Printed Temperature Range -40°F to 275°F (-40°C to 135°C) The opening of the branch-circuit protective device may be an indication that a fault current has been interrupted.
PAGE 954
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Conductor Identification Labels Material Chart Material Polyester Print Method Temperature Range Features Pre-Printed -40°F to 250°F (-40°C to 121°C) Indoor/outdoor rated; laminated label material protects legend from abrasion and chemicals; resistant to UV light, chemical atmosphere, and abrasion; excellent life and adhesion properties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3.
PAGE 955
ELECTRICAL SOLUTIONS A. System Overview ISO Warning Symbols Material Chart Material Print Method Paper (WL1, WL3) Polyester (WL25) Pre-Printed Vinyl (PESW, WL32Y, WL33Y, WL35Y, WL36Y) Part Number -40°F to 176°F (-40°C to 80°C) Symbol B1. Cable Ties Temperature Range Features -65°F to 200°F Indoor rated; general purpose and (-54°C to 80°C) material; excellent adhesion properties when applied to a clean, dry surface.
PAGE 956
ELECTRICAL SOLUTIONS A. System Overview Electrical Labels in Dispenser Material Chart B1. Cable Ties Material Polyester Print Method Pre-Printed Temperature Range -40°F to 250°F (-40° to 121°C) B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5.
PAGE 957
ELECTRICAL SOLUTIONS A. System Overview Write-On Labels on Cards B1. Cable Ties Material Chart Material Vinyl Cloth Print Method Pre-Printed Temperature Range -50°F to 170°F (-46°C to 77°C) Features Indoor/outdoor rated; conformable material with repositionable adhesive allows label to be removed and reused or used in temporary applications; provides durability, high temperature resistance, and dimensional stability for rough or textured surfaces. B2. Cable Accessories B3.
PAGE 958
ELECTRICAL SOLUTIONS A. System Overview Write-On Quality Labels in Dispenser B1. Cable Ties Material Chart Material Polyester B2. Cable Accessories Temperature Range -40°F to 250°F (-40° to 121°C) Print Method Pre-Printed Features Indoor/outdoor rated; laminated label material protects legend from abrasion and chemicals; resistant to UV light, chemical atmosphere, and abrasion; excellent life and adhesion properties. B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3.
PAGE 959
ELECTRICAL SOLUTIONS A. System Overview Inspection Plates Material Chart Material Destructible Vinyl Print Method Temperature Range Pre-Printed -50°F to 225°F (-46°C to 107°C) B1. Cable Ties Features Indoor/outdoor rated; label will destruct upon removal; for permanent and tamper resistant labeling applications. Year 12 In. 0.59 mm 15.0 Markers Per Card 10 13 0.59 15.0 10 10 100 14 0.59 15.0 10 10 100 PEIP-A-15Y 15 0.59 15.0 10 10 100 PEIP-D-12Y 2012 1.38 35.
PAGE 960
ELECTRICAL SOLUTIONS A. System Overview Voltage and Fiber Optic Markers B1. Cable Ties Style A B C B2. Cable Accessories Material Polyester C1. Wiring Duct C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers F. Index E5.32 In. 2.25 1.13 0.
PAGE 961
ELECTRICAL SOLUTIONS A. System Overview Voltage and Safety Marker Books Material Chart Material Print Method Vinyl Pre-Printed Part Number Temperature Range -40°F to 200°F (-40°C to 93°C) B1. Cable Ties Features Indoor rated; economical general purpose material; excellent adhesion properties when applied to a clean, dry surface. Markers Per Page Legend Markers Per Book B2. Cable Accessories Std. Qty. Book(s) Voltage Markers 1.50" x 3.25" (38.00mm x 82.
PAGE 962
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties Reflective Tapes • Reflective tapes can be used for illuminating or highlighting a range of objects • Increases safety during power outages or other low light conditions • Custom legends can be printed using a Panduit TDP43MY thermal printer • Tapes are laminated for improved print quality and durability B2.
PAGE 963
ELECTRICAL SOLUTIONS A. System Overview Underground Hazard Tape Material Chart Material Part Number Print Method Polyethylene (HTU, HTB) Pre-Printed Detectible Laminated Aluminum (HTDU) Pre-Printed Temperature Range -30°F to 200°F (-34°C to 93°C) -30°F to 220°F (-34°C to 104°C) Color (Legend/Background) Legend B1.
PAGE 964
ELECTRICAL SOLUTIONS A. System Overview Barricade Tapes B1. Cable Ties B2. Cable Accessories C1. Wiring Duct Std. Height Length Pkg. In. mm Ft. m Qty. 3.00 76.20 1000.00 305.00 1 Part Number HTB3-C-M Legend CAUTION HTB3-DNE-M CAUTION DO NOT ENTER Black/Yellow 3.00 76.00 1000.00 305.00 1 CAUTION HIGH VOLTAGE Black/Yellow 3.00 76.00 1000.00 305.00 1 HTB3-HV-M B3. Stainless Steel Ties Color (Legend/ Background) Black/Yellow Vinyl Letters and Numbers Material Chart C2.
PAGE 965
ELECTRICAL SOLUTIONS A.
PAGE 966
ELECTRICAL SOLUTIONS A. System Overview Vinyl Cloth Letters and Numbers (continued) B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway Part Number PCL300-0 PCL300-1 thru PCL300-9 PCL300-A thru PCL300-Z PCLCP300-0-9 PCLCP300-A-Z PCL300-DSH Legend 0 1 thru 9 A thru Z 1 thru 5 6 thru 0 A thru Z – Legend Height In. mm 3.00 76.2 Height In. mm 3.50 88.9 Width In. mm 1.50 38.1 Color (Legend/Background) Markers Std. Std. Per Pkg. Ctn.
PAGE 967
ELECTRICAL SOLUTIONS A.
PAGE 968
ELECTRICAL SOLUTIONS A. System Overview B1.
PAGE 969
ELECTRICAL SOLUTIONS A. System Overview Self-Laminating Adhesive Sign Carriers Material Chart Material Rigid Vinyl Part Number B1. Cable Ties Print Method Pre-Printed In. Temperature Range Features -40°F to 150°F Indoor/outdoor rated; rigid material accepts (-40°C to 66°C) ink; resistant to UV light, chemical atmosphere, and abrasion; excellent for applications where adhesives will not work. Height mm In. mm Carriers Per Pkg. Std. Std. Pkg. Ctn. Qty. Qty.
PAGE 970
ELECTRICAL SOLUTIONS A. System Overview Self-Laminating Fiber Optic Cable Marker Tags B1. Cable Ties Material Chart Material Rigid Vinyl, Self-Laminating B2. Cable Accessories Print Method Pre-Printed Temperature Range Features 0°F to 176°F Indoor/outdoor rated; high quality, rugged (-18°C to 80°C) material resistant to abrasion; legend is protected by overlaminate; use where adhesives will not work. B3. Stainless Steel Ties C1. Wiring Duct C2.
PAGE 971
ELECTRICAL SOLUTIONS Panduit Corp. Generic Padlock Order Form One Form per Generic Padlock Option Fax orders to Panduit Corp., Attn: Customer Service (708) 570-3570 Generic Locks are Non-Returnable Date: From: Telephone #: End User: Panduit Sales Rep: Distributor: A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Telephone#/Fax#: Account #: Distributor Contact: Telephone#/Fax#: Account #: Generic Padlock Op ons C1. Wiring Duct C2. Surface Raceway C3.
PAGE 972
ELECTRICAL SOLUTIONS A. System Overview Panduit Corp. Generic PVT Vinyl Tag Order Form One Form per Generic Tag Option Fax orders to Panduit Corp., Attn: Customer Service (708) 570-3570 Generic Tags are Non-Returnable B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Date: From: Telephone #: End User: Panduit Sales Rep: Distributor: Distributor Contact: C1. Wiring Duct Telephone#/Fax#: Account #: C2. Surface Raceway C3. Abrasion Protection C4.
PAGE 973
ELECTRICAL SOLUTIONS A. System Overview Panduit Corp. Generic Adhesive PPS Safety Sign Order Form One Form per Generic Sign Option Fax orders to Panduit Corp., Attn: Customer Service (708) 570-3570 Generic Signs are Non-Returnable Date: From: Telephone #: End User: B1. Cable Ties Panduit Sales Rep: Distributor: B2. Cable Accessories B3. Stainless Steel Ties Distributor Contact: Telephone#/Fax#: C1. Wiring Duct Telephone#/Fax#: Account #: Account #: C2.
PAGE 974
ELECTRICAL SOLUTIONS A. System Overview Panduit Corp. Generic Semi-Rigid PRS Safety Sign Order Form One Form per Generic Sign Option Fax orders to Panduit Corp., Attn: Customer Service (708) 570-3570 Generic Signs are Non-Returnable B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Date: From: Telephone #: End User: Panduit Sales Rep: Distributor: Distributor Contact: C1. Wiring Duct Telephone#/Fax#: Telephone#/Fax#: Account #: Account #: C2.
PAGE 975
ELECTRICAL SOLUTIONS A. System Overview Panduit Corp. Generic Conduit and Voltage Marker Order Form One Form per Generic Marker Option Fax orders to Panduit Corp., Attn: Customer Service (708) 570-3570 Generic Markers are Non-Returnable Date: From: Telephone #: End User: B1. Cable Ties Panduit Sales Rep: Distributor: B2. Cable Accessories B3. Stainless Steel Ties Distributor Contact: Telephone#/Fax#: C1. Wiring Duct Telephone#/Fax#: Account #: Account #: C2.
PAGE 976
ELECTRICAL SOLUTIONS A. System Overview Panduit Corp. Generic Utility Tapes Order Form One Form per Generic Utility Tape Option Fax orders to Panduit Corp., Attn: Customer Service (708) 570-3570 Generic Utility Tapes are Non-Returnable B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties Date: From: Telephone #: End User: Panduit Sales Rep: Distributor: Distributor Contact: C1. Wiring Duct Telephone#/Fax#: Telephone#/Fax#: Account #: Account #: C2. Surface Raceway C3.
PAGE 977
ELECTRICAL SOLUTIONS Panduit Corp. Generic Custom Engraved Marker Plate Order Form One Form per Custom Engraved Marker Plate Option Fax orders to Panduit Corp., Attn: Customer Service (708) 570-3570 Custom Engraved Marker Plates are Non-Returnable A. System Overview B1.
PAGE 978
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories Wire Size Selection Guide To use this guide place your wire or cable in the appropriate circle to determine wire, outside diameter. Diameter .10" (2.50mm) Electrical Cables Approximate Wire Outside Diameter In. (mm) Diameter .20" (5.10mm) B3. Stainless Steel Ties Diameter .28" (7.10mm) C1. Wiring Duct Diameter .54" (13.70mm) C2. Surface Raceway Diameter .94" (23.90mm) C3. Abrasion Protection C4. Cable Management D1.
PAGE 979
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties NOTES B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index E5.52 Order number of pieces required, in multiples of Standard Package Quantity.
PAGE 980
ELECTRICAL SOLUTIONS Page Number Part Number A A1C12-A-C8. . . . . . . . . . . . . . . . . . . . B2.32 A1C25-A-C8. . . . . . . . . . . . . . . . . . . . B2.32 A1C38-A-C8. . . . . . . . . . . . . . . . . . . . B2.32 A1C50-A-C8 . . . . . . . . . . . . . . . . . . . B2.32 A2C12-A-C8 . . . . . . . . . . . . . . . . . . . B2.33 A2C25-A-C8 . . . . . . . . . . . . . . . . . . . B2.33 A2C38-A-C8 . . . . . . . . . . . . . . . . . . . B2.33 A2C50-A-C8 . . . . . . . . . . . . . . . . . . . B2.33 ABM100-A-C . . . . .
PAGE 981
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.2 Page Number Part Number BT1.5I-M30 . . . . . . . . . . . . . . . . . . . . B1.47 BT1.5I-M39 . . . . . .
PAGE 982
ELECTRICAL SOLUTIONS Part Number Page Number C300X100YJT . . . . . . . . . . . . . . . . . . E2.18 C300X100YMT. . . . . . . . . . . . . . . . . . E2.18 C300X200YJT . . . . . . . . . . . . . . . . . . E2.18 C300X200YMT. . . . . . . . . . . . . . . . . . E2.18 C300X250A0T . . . . . . . . . . . . . . . . . . E2.20 C300X250A8T . . . . . . . . . . . . . . . . . . E2.20 C300X250AMT. . . . . . . . . . . . . . . . . . E2.20 C300X250APT . . . . . . . . . . . . . . . . . . E2.20 C300X250AST . . . . . . . . . . . .
PAGE 983
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.4 Part Number Page Number CD-920-300 . . . . . . . . . . . . . . . . . . . . D3.50 CD-920-350 . . . . . .
PAGE 984
ELECTRICAL SOLUTIONS Part Number Page Number CS35-36-CY. . . . . . . . . . . . . . . . . . . D2.137 CS400-38-3Y . . . . . . . . . . . . . . . . . . D2.137 CS650-12-3Y . . . . . . . . . . . . . . . . . . D2.137 CS70-14-CY. . . . . . . . . . . . . . . . . . . D2.137 CSA70-14-CY . . . . . . . . . . . . . . . . . D2.137 CSC1LG6. . . . . . . . . . . . . . . . . . . . . . C1.29 CSCS-M . . . . . . . . . . . . . . . . . . . . . . . B2.27 CSH-D0 . . . . . . . . . . . . . . . . . . . . . . . B2.26 CSH-D20 . . . . .
PAGE 985
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.6 Part Number Page Number DMNF2-63FIMB-K . . . . . . . . . . . . . . D1.136 DMNF2-63FIMX-2K . . . . . . .
PAGE 986
ELECTRICAL SOLUTIONS Page Number Part Number DT44EH-C0 . . . . . . . . . . . . . . . . . . . . B1.53 DT4EH-L0 . . . . . . . . . . . . . . . . . . . . . B1.53 DT8EH-Q0 . . . . . . . . . . . . . . . . . . . . . B1.53 DTHEH-Q0. . . . . . . . . . . . . . . . . . . . . B1.53 DTHH-Q0 . . . . . . . . . . . . . . . . . . . . . . B1.53 DTKEH-0 . . . . . . . . . . . . . . . . . . . . . . B1.53 DTKH-0 . . . . . . . . . . . . . . . . . . . . . . . B1.53 DTREH-LR0 . . . . . . . . . . . . . . . . . . . . B1.
PAGE 987
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.8 Part Number Page Number FCBI2-S10-C20 . . . . . . . . . . . . . . . . . B2.25 FCBI3-A-C20 . . . . . . .
PAGE 988
ELECTRICAL SOLUTIONS Page Number Part Number G G.5X.5LG6 . . . . . . . . . . . . . . . . . . . . . C1.13 G.5X.5LG6-A . . . . . . . . . . . . . . . . . . . C1.33 G.5X.5WH6-A . . . . . . . . . . . . . . . . . . C1.33 G.5X1LG6 . . . . . . . . . . . . . . . . . . . . . C1.13 G.5X1LG6-A . . . . . . . . . . . . . . . . . . . C1.33 G.5X1WH6-A . . . . . . . . . . . . . . . . . . . C1.33 G.5X2LG6 . . . . . . . . . . . . . . . . . . . . . C1.13 G.75X.75LG6 . . . . . . . . . . . . . . . . . . . C1.13 G.75X.75LG6-A .
PAGE 989
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.10 Page Number Part Number GPQC15-1/0. . . . . . . . . . . . . . . . . . . D3.5 GPQC17-1/0. . . . . . . .
PAGE 990
ELECTRICAL SOLUTIONS Part Number Page Number HST0.8-48-5-2Y. . . . . . . . . . . . . . . . . C3.38 HST0.8-48-5Y . . . . . . . . . . . . . . . . . . C3.38 HST0.8-6-3Y . . . . . . . . . . . . . . . . . . . C3.38 HST0.8-6-X2Y . . . . . . . . . . . . . . . . . . C3.38 HST0.8-6-XY . . . . . . . . . . . . . . . . . . . C3.38 HST0.8-9-X2Y . . . . . . . . . . . . . . . . . . C3.38 HST0.8-9-XY . . . . . . . . . . . . . . . . . . . C3.38 HST1.1-12-5-2Y. . . . . . . . . . . . . . . . . C3.38 HST1.1-12-5Y . . . . . .
PAGE 991
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.12 Part Number Page Number HSTTT93-48-5 . . . . . . . . . . . . . . . . . . C3.34 HSTTV05-48-Q . . . . .
PAGE 992
ELECTRICAL SOLUTIONS Page Number Part Number JMCMB25-3-X . . . . . . . . . . . . . . . . . . . C4.8 JMDWB-1-X . . . . . . . . . . . . . . . . . . . . . C4.8 JMDWB-3-X . . . . . . . . . . . . . . . . . . . . . C4.8 JMJH2-X20 . . . . . . . . . . . . . . . . . . . . . C4.8 JMJH2W-X20 . . . . . . . . . . . . . . . . . . . . C4.8 JMN2-C . . . . . . . . . . . . . . . . . . . . . . . D1.69 JMN6-C . . . . . . . . . . . . . . . . . . . . . . . D1.69 JMSBCB87-1-X . . . . . . . . . . . . . . . . . . C4.
PAGE 993
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.14 Part Number Page Number LC5-A-C8 . . . . . . . . . . . . . . . . . . . . . . B2.37 LCA1-00-E . . . . .
PAGE 994
ELECTRICAL SOLUTIONS Part Number Page Number LCAF1/0-38F-X . . . . . . . . . . . . . . . . . D2.77 LCAF1/0-38H-X . . . . . . . . . . . . . . . . . D2.75 LCAF1/0-56-X . . . . . . . . . . . . . . . . . . D2.73 LCAF1/0-56F-X . . . . . . . . . . . . . . . . . D2.77 LCAF1/0-56H-X . . . . . . . . . . . . . . . . . D2.75 LCAF2-12-E . . . . . . . . . . . . . . . . . . . . D2.73 LCAF2-12F-E. . . . . . . . . . . . . . . . . . . D2.77 LCAF2-12H-E . . . . . . . . . . . . . . . . . . D2.75 LCAF2-14-E . . . . . . . . .
PAGE 995
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.16 Part Number Page Number LCAS250-12F-X. . . . . . . . . . . . . . . . . D2.12 LCAS250-12H-X . . . . . .
PAGE 996
ELECTRICAL SOLUTIONS Part Number Page Number LCAX500-56H-6. . . . . . . . . . . . . . . . . D2.69 LCAX500-58-6 . . . . . . . . . . . . . . . . . . D2.67 LCAX500-58F-6 . . . . . . . . . . . . . . . . . D2.71 LCAX500-58H-6. . . . . . . . . . . . . . . . . D2.69 LCAX6-10-L . . . . . . . . . . . . . . . . . . . . D2.66 LCAX6-10F-L . . . . . . . . . . . . . . . . . . . D2.70 LCAX6-10H-L. . . . . . . . . . . . . . . . . . . D2.68 LCAX6-14-L . . . . . . . . . . . . . . . . . . . . D2.66 LCAX6-14F-L . . . . . . .
PAGE 997
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.18 Part Number Page Number LCBX3/0-38H-X . . . . . . . . . . . . . . . . . D2.80 LCBX300-12F-6 . . . . .
PAGE 998
ELECTRICAL SOLUTIONS Part Number Page Number LCC2/0-38DH-X. . . . . . . . . . . . . . . . . D2.44 LCC2/0-38DW-X . . . . . . . . . . . . . . . . D2.48 LCC2/0-38DWF-X . . . . . . . . . . . . . . . D2.54 LCC2/0-38DWH-X . . . . . . . . . . . . . . . D2.51 LCC2/0-56D-X . . . . . . . . . . . . . . . . . . D2.42 LCC2/0-56DF-X . . . . . . . . . . . . . . . . . D2.46 LCC2/0-56DH-X. . . . . . . . . . . . . . . . . D2.44 LCC2/0-56DW-X . . . . . . . . . . . . . . . . D2.48 LCC2/0-56DWF-X . . . . . . . . . . . . . . .
PAGE 999
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.20 Part Number Page Number LCC6-14BW-L . . . . . . . . . . . . . . . . . . D2.47 LCC6-14BWF-L . . . . . .
PAGE 1000
ELECTRICAL SOLUTIONS Part Number Page Number LCCF600-12H-6. . . . . . . . . . . . . . . . . D2.99 LCCF750-12-3 . . . . . . . . . . . . . . . . . . D2.97 LCCF750-12F-3 . . . . . . . . . . . . . . . . D2.101 LCCF750-12H-3. . . . . . . . . . . . . . . . . D2.99 LCCF750-38D-3. . . . . . . . . . . . . . . . . D2.97 LCCF750-38DF-3 . . . . . . . . . . . . . . D2.101 LCCF750-38DH-3 . . . . . . . . . . . . . . . D2.99 LCCF8-14A-L. . . . . . . . . . . . . . . . . . . D2.96 LCCF8-14AF-L. . . . . . . . . . . . . . .
PAGE 1001
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.22 Part Number Page Number LCD2-14A-Q . . . . . . . . . . . . . . . . . . . D2.31 LCD2-14AF-Q . . . . . .
PAGE 1002
ELECTRICAL SOLUTIONS Part Number Page Number LCDX1/0-56BF-X . . . . . . . . . . . . . . . . D2.87 LCDX1/0-56BH-X. . . . . . . . . . . . . . . . D2.85 LCDX1/0-56D-X . . . . . . . . . . . . . . . . . D2.83 LCDX1/0-56DF-X. . . . . . . . . . . . . . . . D2.87 LCDX1/0-56DH-X . . . . . . . . . . . . . . . D2.85 LCDX2-12-E. . . . . . . . . . . . . . . . . . . . D2.82 LCDX2-12F-E . . . . . . . . . . . . . . . . . . D2.86 LCDX2-12H-E . . . . . . . . . . . . . . . . . . D2.84 LCDX2-14A-E . . . . . . . . . . . . . .
PAGE 1003
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.24 Part Number Page Number LCMA16-6-C . . . . . . . . . . . . . . . . . . D2.108 LCMA16-8-C . . . . . . .
PAGE 1004
ELECTRICAL SOLUTIONS Part Number Page Number MBSH-TR316. . . . . . . . . . . . . . . . . . . B3.12 MC100X100IG2 . . . . . . . . . . . . . . . . . C1.19 MC100X50IG2 . . . . . . . . . . . . . . . . . . C1.19 MC100X75IG2 . . . . . . . . . . . . . . . . . . C1.19 MC25X25IG2 . . . . . . . . . . . . . . . . . . . C1.19 MC25X37IG2 . . . . . . . . . . . . . . . . . . . C1.19 MC25X50IG2 . . . . . . . . . . . . . . . . . . . C1.19 MC25X62IG2 . . . . . . . . . . . . . . . . . . . C1.19 MC25X75IG2 . . . . . . . . . .
PAGE 1005
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.26 Part Number Page Number MPMS25-C0. . . . . . . . . . . . . . . . . . . . B2.21 MPMWH32-L0 . . . . . .
PAGE 1006
ELECTRICAL SOLUTIONS Page Number Part Number NNC100X50LG2 . . . . . . . . . . . . . . . . C1.23 NNC100X75LG2 . . . . . . . . . . . . . . . . C1.23 NNC25X25LG2 . . . . . . . . . . . . . . . . . C1.23 NNC25X37LG2 . . . . . . . . . . . . . . . . . C1.23 NNC25X50LG2 . . . . . . . . . . . . . . . . . C1.23 NNC25X75LG2 . . . . . . . . . . . . . . . . . C1.23 NNC37X37LG2 . . . . . . . . . . . . . . . . . C1.23 NNC37X50LG2 . . . . . . . . . . . . . . . . . C1.23 NNC37X75LG2 . . . . . . . . . . . . . . . . . C1.
PAGE 1007
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.28 Part Number Page Number PATM-RKS. . . . . . . . . . . . . . . . . . B1.119 PATM-TT . . . . . . . . . .
PAGE 1008
ELECTRICAL SOLUTIONS Part Number Page Number PCSB2/0-14-1Y . . . . . . . . . . . . . . . . D2.150 PCSB2/0-14S-1Y . . . . . . . . . . . . . . . D2.149 PCSB2/0-2-12 . . . . . . . . . . . . . . . . . D2.150 PCSB2/0-2S-6 . . . . . . . . . . . . . . . . . D2.149 PCSB2/0-3-6 . . . . . . . . . . . . . . . . . . D2.150 PCSB2/0-3S-6Y . . . . . . . . . . . . . . . . D2.149 PCSB2/0-4-6 . . . . . . . . . . . . . . . . . . D2.150 PCSB2/0-4S-6Y . . . . . . . . . . . . . . . . D2.149 PCSB2/0-5-6 . . . . . . . . . . . .
PAGE 1009
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.30 Part Number Page Number PCV-TELEAY . . . . . . . . . . . . . . . . . . . E5.32 PCV-TELEBY . . . . . .
PAGE 1010
ELECTRICAL SOLUTIONS Part Number Page Number PLD-11 . . . . . . . . . . . . . . . . . . . . . . . . E5.30 PLD-12 . . . . . . . . . . . . . . . . . . . . . . . . E5.28 PLD-17 . . . . . . . . . . . . . . . . . . . . . . . . E5.30 PLD-18 . . . . . . . . . . . . . . . . . . . . . . . . E5.30 PLD-22 . . . . . . . . . . . . . . . . . . . . . . . . E5.30 PLD-28 . . . . . . . . . . . . . . . . . . . . . . . . E5.30 PLD-29 . . . . . . . . . . . . . . . . . . . . . . . . E5.30 PLD-3 . . . . . . . . . . . . . . . .
PAGE 1011
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.32 Part Number Page Number PLT3S-VMR . . . . . . . . . . . . . . . . B1.122 PLT3S-VMR30 . . . . . . . . .
PAGE 1012
ELECTRICAL SOLUTIONS Part Number Page Number PMV1-6FB-3K . . . . . . . . . . . . . . . . . D1.120 PMV1-6FB-CY . . . . . . . . . . . . . . . . . . D1.35 PMV1-6RB-3K . . . . . . . . . . . . . . . . . D1.118 PMV1-6RB-CY. . . . . . . . . . . . . . . . . . D1.34 PMV1-P10-CY . . . . . . . . . . . . . . . . . . D1.60 PMV1-P12B-3K . . . . . . . . . . . . . . . . D1.138 PMV2-35RB-3K . . . . . . . . . . . . . . . . D1.118 PMV2-3FB-3K . . . . . . . . . . . . . . . . . D1.120 PMV2-3FB-C . . . . . . . . . . . . . . .
PAGE 1013
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.34 Part Number Page Number PNF10-56R-2K . . . . . . . . . . . . . . . . D1.104 PNF10-56R-L. . . . . . . .
PAGE 1014
ELECTRICAL SOLUTIONS Part Number Page Number PRT2EH-C100 . . . . . . . . . . . . . . . . . . B1.25 PRT2EH-Q0 . . . . . . . . . . . . . . . . . . . . B1.24 PRT2H-L . . . . . . . . . . . . . . . . . . . . . . B1.22 PRT2H-L0 . . . . . . . . . . . . . . . . . . . . . B1.23 PRT2S-C . . . . . . . . . . . . . . . . . . . . . . B1.22 PRT2S-C0 . . . . . . . . . . . . . . . . . . . . . B1.23 PRT3H-L . . . . . . . . . . . . . . . . . . . . . . B1.22 PRT3H-L0 . . . . . . . . . . . . . . . . . . . . . B1.23 PRT3S-C .
PAGE 1015
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.36 Part Number Page Number PT14-8R-C. . . . . . . . . . . . . . . . . . . . . D1.12 PT18-10R-C. . . . . .
PAGE 1016
ELECTRICAL SOLUTIONS Part Number Page Number PV18-8R-CY . . . . . . . . . . . . . . . . . . . . D1.9 PV18-8RB-3K . . . . . . . . . . . . . . . . . D1.105 PV18-8RX-CY . . . . . . . . . . . . . . . . . . D1.10 PV18-8SLF-CY . . . . . . . . . . . . . . . . . D1.27 PV18-8SLFB-3K . . . . . . . . . . . . . . . D1.113 PV18-P47-CY . . . . . . . . . . . . . . . . . . D1.54 PV18-P47B-3K. . . . . . . . . . . . . . . . . D1.130 PV2-10R-XY . . . . . . . . . . . . . . . . . . . D1.15 PV2-10RX-XY . . . . . . . . . . . .
PAGE 1017
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.38 Page Number Part Number RFG5DSMY . . . . . . . . . . . . . . . . . . . . . C4.2 RFG6X8Y. . . . . . . .
PAGE 1018
ELECTRICAL SOLUTIONS Part Number Page Number SACS50-T100. . . . . . . . . . . . . B1.54, B2.27 SAR1/0-2-X . . . . . . . . . . . . . . . . . . . D2.116 SAR2-4-X. . . . . . . . . . . . . . . . . . . . . D2.116 SAR3/0-1/0-5 . . . . . . . . . . . . . . . . . . D2.116 SAR350-4/0-2 . . . . . . . . . . . . . . . . . D2.116 SAR4/0-2/0-5 . . . . . . . . . . . . . . . . . . D2.116 SAR500-350-2 . . . . . . . . . . . . . . . . . D2.116 SAR600-500-2 . . . . . . . . . . . . . . . . . D2.116 SAR750-600-2 . . . . . . . .
PAGE 1019
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.40 Part Number Page Number SEZ-1DLL . . . . . . . . . . . . . . . . . . . . . E5.40 SEZ-1NLL . . . . . .
PAGE 1020
ELECTRICAL SOLUTIONS Page Number Part Number STS2 . . . . . . . . . . . . . . . . . . . . . . . . B1.112 T T019X000FJC-BK . . . . . . . . . . . . . . . E1.11 T024X000FJC-BK . . . . . . . . . . . . . . . E1.11 T031X000FJC-BK . . . . . . . . . . . . . . . E1.11 T038X000C1C-BK . . . . . . . . . . . . . . . . E1.5 T038X000C2C-BK . . . . . . . . . . . . . . . . E1.5 T038X000FJC-BK . . . . . . . . . . . . . . . E1.11 T038X000VPC-BK . . . . . . . . . . . . . . . E1.12 T038X000VYC-WH . . . . . . . . . . . . . .
PAGE 1021
ELECTRICAL SOLUTIONS A. System Overview B1. Cable Ties B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index F1.42 Part Number Page Number T702TIW . . . . . . . . . . . . . . . . . . . . . . C2.21 T702TRI . . . . . .
PAGE 1022
ELECTRICAL SOLUTIONS Page Number Part Number U UCT3S-X0 . . . . . . . . . . . . . . . . . . . . . B1.89 UCT5S-X0 . . . . . . . . . . . . . . . . . . . . . B1.89 UCTGS1224-X . . . . . . . . . . . . . . . . . . B1.89 UCTGSM5-X . . . . . . . . . . . . . . . . . . . B1.89 UCTGSM6-X . . . . . . . . . . . . . . . . . . . B1.89 UGCTC3S-X0 . . . . . . . . . . . . . . . . . . B1.89 UGCTC5S-X0 . . . . . . . . . . . . . . . . . . B1.89 UGCTE3S-X0. . . . . . . . . . . . . . . . . . . B1.89 UGCTE5S-X0. . . . . . . . .
PAGE 1023
Panduit is a global leader in cabling and communication products, delivering end-to-end solutions in support of demanding electrical and networking requirements.