Information

ELECTRICAL SOLUTIONS
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
B2.52
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Automatic Cable Tie Mounts
• Automatic alignment orients the tool head with the mount
for reliable feeding of the cable through the mount to
speed installation
• Multiple fixture configurations allow mounting in horizontal,
vertical, or 45° orientation
• Integrated switch* capability enables placement of a switch
to detect the mount’s presence providing an input to a
quality control system
• Activation device on harness board fixture prevents tool from
operating unless it is properly engaged in the fixture for
operator safety
Harness Board Fixtures
*The Omron Electronics D2SW-3L1HS switch is compatible with the ATM system. Similar switches from other manufacturers may also be suitable.
See page B1.115 for Panduit Automatic Cable Tie Installation Systems.
2.38
(60)
2.50
(64)
5.04
(128)
ATMB
Auto Tie Mounts work with Reel-fed Cable Ties and Automatic Tooling. See page B1.115.
A
B
C
• Multiple sizes work with industry standard panel thickness
and hole diameters for greater application flexibility
• Low profile design keeps bundle close to mounting surface,
saving space and providing greater protection for bundles
in high vibration applications
• Supports Miniature and Intermediate cross section
cable ties
Part Number
Used with
Cable Ties
A
Length
B
Width
C
Height
Maximum
Panel
Thickness
Panel Hole
Diameter Range
Material Color
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.In. mm In. mm In. mm In. mm In. mm
ATM-W187-M
BT1.5M-
XMR,
PLT1.5M-
XMR
0.80 20.5 0.35 9.0
0.58 14.6
0.12 3.0
0.17 –
0.20
4.3 –
4.9
Nylon 6.6
Natural 1000 5000
ATM-W187-M20
Black 1000 5000
ATM-W187-M30
Heat
Stabilized
Nylon 6.6
Black 1000 5000
ATM-W250-M
0.66 16.6
0.23 –
0.26
5.7 –
6.6
Nylon 6.6
Natural 1000 5000
ATM-W250-M20
Black 1000 5000
ATM-W250-M30
Heat
Stabilized
Nylon 6.6
Black 1000 5000
Part Number Description Mounting Color Material
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
ATMB Base Screw base to harness
board with 1/4" screws
Black
Acetal
—10
ATMI-W187-X Insert for ATM-W187 mount Snaps into ATMB Yellow 10 —
ATMI-W250-X Insert for ATM-W250 mount Snaps into ATMB Red 10 —
ATMI-XMR-X Used for cable tie installations where
mounts are NOT required
Snaps into ATMB Black 10 —
ATMC Clamp used to secure the ATMB (base)
in a vertical or 45° position
Screw clamp to harness
board with 1/4" screws
Black — 10