Information

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)
ELECTRICAL SOLUTIONS
B3.15
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
ST2MT Installation Tool
• Cable tie side entry for immediate positioning of tie and tool
• One hand operation – lightweight
• Easy removal of excess tie
• Tool tension is controlled by installer – twist action cut-off
• Rugged, lightweight, easy-to-operate pliers-type tool provides
mechanical advantage
RT2HT and RT2HTN Installation Tools
• Cable tie side entry for immediate positioning of tie and tool to
speed installation
• Multi-position rear handle provides flexibility for a one or two hand
installation
• Narrow nose tool design option available for applications requiring
installations in tight confined spaces
• Replacement cutter blade and handle available for RT2HT
HTMT Installation Tool
• Economical
• Coiled tie end remaining after tensioning assures a safe end
• Manual tension, no cut-off
• Installs ties parallel to the bundle
Part Number Part Description
Std.
Pkg.
Qty.
HTMT
Used with standard, light-heavy, and heavy cross section Pan-Steel
®
type
MLT ties, type MLTC/MLTFC coated ties, and type MLTDH double
wrapped ties.
1
RT2HT
RT2HTN
Part Number Part Description
Std.
Pkg.
Qty.
ST2MT Used with standard, light-heavy, heavy and extra-heavy cross section
Pan-Steel
®
type MLT ties, type MLTC/MLTFC coated ties, and type MLTDH
double wrapped ties.
1
Part Number Part Description
Std.
Pkg.
Qty.
RT2HT Used with extra-heavy, extra-heavy 15, and super-heavy cross section
Pan-Steel
®
type MLT and MLTFC ties. Width of tool nose 2.60" (66.0mm).
1
RT2HTN Narrow nose installation tool for use with extra-heavy, extra-heavy 15, and
super-heavy cross section Pan-Steel
®
type MLT and MLTFC ties. Width of
tool nose 1.06" (27.0mm).
1