Information

ELECTRICAL SOLUTIONS
C1.60
Fiber-Duct
™
Mounting Brackets
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
FTRBE12, FTRBE58
FTRBE12M
FTRBN12, FTRBN58
FTRBN12M
FUSB
FLRB
FLB
FZBA1.5X4
FZBLP
Order number of pieces required, in multiples of Standard Package Quantity.
Prime items appear in BOLD.
Part Number Part Description
For
Threaded
Rod Size
Std.
Pkg.
Qty.
Std.
Ctn.
Qty.
Existing Threaded Rod Bracket for Fiber-Duct
™
System
FTRBE12
Used for supporting the 2x2 and 4x4 Fiber-Duct
™
Systems from existing threaded rod installations.
Bracket is secured to threaded rod with two split nuts.
Contains hardware for attaching to threaded rods
and hardware for mounting channel to bracket.
1/2" 1 10
FTRBE58
5/8" 1 10
FTRBE12M
12mm 1 10
New Threaded Rod Bracket for Fiber-Duct
™
System
FTRBN12
Used for supporting the 2x2 and 4x4 Fiber-Duct
™
Systems from new threaded rod installations. Bracket
is secured to threaded rod with two nuts. Contains
hardware for attaching to threaded rods and hardware
for mounting channel to bracket.
1/2" 1 10
FTRBN58
5/8" 1 10
FTRBN12M
12mm 1 10
Underfloor Pedestal Bracket for Fiber-Duct
™
System
FUSB
Used to support the 2x2 and 4x4 Fiber-Duct
™
Systems by attaching to underfloor pedestal (not
included). Use on pedestals up to 1” in diameter.
Bracket contains hardware to attach to pedestal
and hardware for mounting channel to bracket.
—110
Ladder Rack Bracket for Fiber-Duct
™
System
FLRB
Used to support the 2x2 and 4x4 Fiber-Duct
™
Systems attaching directly to any 3/8" (9.5mm) x
1 1/2"(38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder
rack rail. No threaded rod required. Contains hardware
for mounting channel to bracket.
—110
“L” Wall Mount Bracket for Fiber-Duct
™
System
FLB
Used to support 2x2 and 4x4 Fiber-Duct
™
Systems
by attaching to a wall or the front or back of an
equipment rack. Contains hardware for mounting
channel to bracket.
—110
Adjustable “Z” Bracket
FZBA1.5X4
Bracket used to offset Fiber-Duct
™
System from
mounting surface, adjustable from 1.5" (38mm) to
4" (101mm). Typically used on the front of an
equipment rack.
—110
Low Profile “Z” Bracket
FZBLP
Bracket used to offset 2x2 or 4x4 Fiber-Duct
™
System
and hinged duct from the front face of an equipment
rack. Bracket provides a secure mounting surface
.67" (17mm) from the front of an equipment rack.
—110