Information

ELECTRICAL SOLUTIONS
Order number of pieces required, in multiples of Standard Package Quantity.
C3.44
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Dry-Shrink
™
, Damp-Shrink
™
, and Wet-Shrink
™
Heat Shrink Tubing
Technical Data
General Information
Product Type Typical Applications Specific Gravity Flammability Water Absorption Dielectric Strength
HSTT Economical and easy way to insulate, protect,
harness and identify electrical and electronic
components in a wide variety of applications.
Black is U.V. Resistant. Suitable for use in dry locations.
Class 1, 1.35
Class 2, 1.0
ASTM D792
Class 1 Self
Extinguishing
ASTM D2671
Procedure B
.5% MAX.
ASTM
D570
500 V/MIL.
(19.7 Kv/mm) min.
ASTM D2671
HSTTV Use where UL recognition with VW-1 rating is required.
Use where the wire component cannot tolerate
higher shrink temperatures, reduces application time to
insulate, protect, identify, etc. Black is U.V. Resistant.
Suitable for use in dry locations.
1.50
ASTM D792
VW-1 per UL 224 .5% MAX.
ASTM
D570
500 V/MIL.
(19.7 Kv/mm) min.
ASTM D2671
HSTTP Ripple free conformance around sharp bends as
in appliance handles and bus bars. Good cut through
and solder-iron resistance. Black is U.V. Resistant.
Suitable for use in dry locations.
1.35 MAX. VW-1 per UL 224 1.0% MAX.
ASTM
D570
400 V/MIL.
(15.8 Kv/mm) min.
ASTM D2671
HSTTPN Crystal clear product that is excellent for protecting wire
and cable markers and continuous inspection of splices.
Suitable for use in dry locations.
N/A VW-1 per UL 224 1.0% MAX.
ASTM
D570
400 V/MIL.
(15.8 Kv/mm) min.
ASTM D2671
HSTTN Insulation and abrasion resistance, extensive
military uses on vehicles and ship-board.
Excellent chemical resistance especially to
fuels and oils. Black is U.V. Resistant.
Suitable for use in dry locations.
1.30
ASTM
D792
Self Extinguishing
ASTM D876
1.0% MAX.
ASTM
D570
300 V/MIL.
(11.8 Kv/mm) min.
ASTM D2671
HSTTT High insulation and abrasion resistance.
High temperature, strain relief, resists corrosive
atmosphere, self lubrication and non-wetting.
Can be used with fiber optics and as a strain relief
for high density connectors. U.V. Resistant.
Suitable for use in dry locations.
2.2 MAX.
ASTM
D792
VW-1 per UL 224 .01% MAX.
ASTM
D570
800 V/MIL.
(31.5 Kv/mm) min.
ASTM D2671
HSTTK Protection and strain relief for wires or
connectors in a high temperature or solvent
rich environment. Insulation of heater leads.
Suitable for use in dry locations.
1.8 MAX.
ASTM
D792
VW-1 per UL 224 .5% MAX.
ASTM
D570
Size to (12.7mm)
800 V/MIL.
(31.5 Kv/mm) min
Over (12.7mm)
600 V/MIL.
(23.6 Kv/mm) min
ASTM D2671
HSTTVA Seals and protects components from
moisture and corrosion. Use where a flexible
tubing is needed. Suitable for damp locations.
N/A Self
Extinguishing
ASTM D2671
Procedure B
.5% MAX.
ASTM
D570
500 V/MIL.
(19.7 Kv/mm) min.
ASTM D2671
HSTTA Environmentally seals and protects
components. The 3:1 shrink ratio is a benefit
when working with connector to cable transitions.
Suitable for damp locations.
N/A Self Extinguishing
ASTM D2671
Procedure B
1.0% MAX.
ASTM
D570
300 V/MIL.
(11.8 Kv/mm) min.
ASTM D2671
HSTT4A Seals and protects components from moisture
and corrosion. The 4:1 shrink ratio is a benefit when
working with large transitions. Use where a flexible
tubing is needed. Suitable for damp locations.
N/A VW-1 per UL 224 1.0% MAX.
ASTM
D570
500 V/MIL.
(19.7 Kv/mm) min.
ASTM D2671
HSTTRA Environmentally seals and protects
components forming a rugged and heavy duty
covering. The 2.5:1 shrink ratio is a benefit
when working with connector to cable
transitions. Suitable for damp locations.
N/A N/A .5% MAX.
ASTM
D570
500 V/MIL.
(19.7 Kv/mm) min.
ASTM D2671
HST Seals and protects electrical connections
and splices above or below ground, 3:1 shrink
ratio. Suitable for outdoor and wet locations.
1.2 MAX. VW-1 per UL 224 .5% MAX.
ASTM
D570
200 V/MIL.
(7.9 Kv/mm) min.
ASTM D2671