Information

ELECTRICAL SOLUTIONS
D1.44
B2.
Cable
Accessories
C1.
Wiring
Duct
C3.
Abrasion
Protection
C4.
Cable
Management
D1.
Terminals
D2.
Power
Connectors
E1.
Labeling
Systems
E2.
Labels
E3.
Pre-Printed
& Write-On
Markers
F.
Index
B3.
Stainless
Steel Ties
C2.
Surface
Raceway
E5.
Lockout/
Tagout
& Safety
Solutions
B1.
Cable Ties
A.
System
Overview
D3.
Grounding
Connectors
E4.
Permanent
Identification
Disco-Lok
™
Female Disconnect, Nylon Fully Insulated – Funnel Entry
• Disconnect can be inserted and removed from the male tab
without the use of tools for lower installed cost
• Unique locking mechanism design allows for low insertion forces
(mating) and positive lock for high vibration applications where a
secure connection is mandatory
• Fully insulated design provides protection from electrical shorts
• Flared barrel extension integrated into stamping to provide
insulation grip for double crimp requirements
• Insulation housing moves back and forth to engage and disengage
locking mechanism for repeated use.
• Specialty tool required to install this disconnect (CT-1014)
• Mates with DNF-FIMB family
• UL Flammability UL 94V-2/HB, maximum insulation temperature
221°F (105°C)
• UL and CSA rated up to 300 V per UL 310
**Bulk packaging may be available, contact Panduit Customer Service for additional information.
For crimping tool information, see page D1.84.
Type DNG-FL
L
H
W
Male/Female Coupler, Nylon Fully Insulated – Funnel Entry
• Disconnect can be inserted and removed from the male tab
without the use of tools for lower installed cost
• Fully insulated design provides protection from electrical shorts
• Internal barrel serrations assure good wire contact and maximum
tensile strength
• Internal wire stop assures proper length of insertion into terminal
barrel, providing a higher quality connection
• Coupler, male, and female parts sold separately
• UL Flammability UL 94V-2/HB, maximum insulation temperature
221°F (105°C)
• UL and CSA rated up to 600 V per UL 310
**Bulk packaging may be available, contact Panduit Customer Service for additional information.
‡UL and CSA approved tooling/product combinations. For crimping tool information, see pages D1.83, D1.84,
D1.86 and D1.88.
Type DNF
H
W
H
FEMALE
MALE
L
W
L
Part Number
Wire
Range
Color
Code
Max.
Ins.
(In.)
Figure Dimensions
(In.)
Tab
Size
(In.)
Recommended
Installation
Tool
Std.
Pkg.
Qty.**
Std.
Ctn.
Qty.
L W H
DNG18-250FL-L
22 – 18
AWG
Red 0.126 0.97 0.36 0.24 0.250 x 0.032 CT-1014 50 250
DNG14-250FL-L
16 – 14
AWG
Blue 0.150 0.97 0.36 0.25 0.250 x 0.032 CT-1014 50 250
Part Number
Wire
Range
Color
Code
Max.
Ins.
(In.)
Figure
Dimensions (In.)
Tab
Size
(In.)
Recommended
Installation
Tool
Std.
Pkg.
Qty.**
Std.
Ctn.
Qty.
L W H
DNF18-250FIM-L
Male
22 – 18
AWG
Red
0.133 0.90 0.42 0.27 0.250 x 0.032
CT-100A‡,
CT-600-A,
CT-1525‡,
CT-2500‡
50 250
DNF18-250FIMB-L
Male
0.136 0.91 0.45 0.34 0.250 x 0.032 50 500
DNF18-250FIB-C
Female
0.136 0.84 0.35 0.22 0.250 x 0.032
CT-100A,
CT-600-A,
CT-1525‡,
CT-2500‡
100 1000
DNF14-250FIM-L
Male
16 – 14
AWG
Blue
0.158 0.90 0.42 0.27 0.250 x 0.032
CT-600-A,
CT-1525‡,
CT-2500‡
50 250
DNF14-250FIMB-Q
Male
0.160 0.91 0.45 0.34 0.250 x 0.032 25 125
DNF14-250FIB-C
Female
0.160 0.84 0.35 0.22 0.250 x 0.032 CT-100A,
CT-600-A,
CT-1525‡,
CT-2500‡
100 1000
DNF10-250FIMB-Q
Male
12 – 10
AWG
Yellow
0.220 0.96 0.45 0.36 0.250 x 0.032 CT-600-A‡,
CT-1550‡,
CT-1551‡,
CT-2500‡
25 125
DNF10-250FI-L
Female
0.220 0.95 0.36 0.27 0.250 x 0.032 CT-100A‡,
CT-600-A‡,
CT-1550‡,
CT-1551‡,
CT-2500‡
50 500
MALE
FEMALE